Merge branch 'dsa-Plug-in-PHYLINK-support'

Florian Fainelli says:

====================
net: dsa: Plug in PHYLINK support

This patch series adds PHYLINK support to DSA which is necessary to support more
complex PHY and pluggable modules setups.

Patch series can be found here:

https://github.com/ffainelli/linux/commits/dsa-phylink-v2

This was tested on:

- dsa-loop
- bcm_sf2
- mv88e6xxx
- b53

With a variety of test cases:
- internal & external MDIO PHYs
- MoCA with link notification through interrupt/MMIO register
- built-in PHYs
- ifconfig up/down for several cycles works
- bind/unbind of the drivers

Changes in v2:

- fixed link configuration for mv88e6xxx (Andrew) after introducing polling

This is technically v2 of what was posted back in March 2018, changes from last
time:

- fixed probe/remove of drivers
- fixed missing gpiod_put() for link GPIOs
- fixed polling of link GPIOs (Russell I would need your SoB on the patch you
  provided offline initially, added some modifications to it)
- tested across a wider set of platforms

And everything should still work as expected. Please be aware of the following:

- switch drivers (like bcm_sf2) which may have user-facing network ports using
  fixed links would need to implement phylink_mac_ops to remain functional.
  PHYLINK does not create a phy_device for fixed links, therefore our
  call to adjust_link() from phylink_mac_link_{up,down} would not be calling
  into the driver. This *should not* affect CPU/DSA ports which are configured
  through adjust_link() but have no network devices

- support for SFP/SFF is now possible, but switch drivers will still need some
  modifications to properly support those, including, but not limited to using
  the correct binding information. This will be submitted on top of this series

Please do test on your respective platforms/switches and let me know if you
find any issues, hopefully everything still works like before.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 25 insertions, 0 deletions

diff --git a/include/net/dsa.h b/include/net/dsa.h
index 462e9741b210..fdbd6082945d 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -20,12 +20,14 @@
 #include <linux/of.h>
 #include <linux/ethtool.h>
 #include <linux/net_tstamp.h>
+#include <linux/phy.h>
 #include <net/devlink.h>
 #include <net/switchdev.h>
 
 struct tc_action;
 struct phy_device;
 struct fixed_phy_status;
+struct phylink_link_state;
 
 enum dsa_tag_protocol {
 	DSA_TAG_PROTO_NONE = 0,
@@ -199,6 +201,7 @@ struct dsa_port {
 	u8			stp_state;
 	struct net_device	*bridge_dev;
 	struct devlink_port	devlink_port;
+	struct phylink		*pl;
 	/*
 	 * Original copy of the master netdev ethtool_ops
 	 */
@@ -354,6 +357,27 @@ struct dsa_switch_ops {
 				struct fixed_phy_status *st);
 
 	/*
+	 * PHYLINK integration
+	 */
+	void	(*phylink_validate)(struct dsa_switch *ds, int port,
+				    unsigned long *supported,
+				    struct phylink_link_state *state);
+	int	(*phylink_mac_link_state)(struct dsa_switch *ds, int port,
+					  struct phylink_link_state *state);
+	void	(*phylink_mac_config)(struct dsa_switch *ds, int port,
+				      unsigned int mode,
+				      const struct phylink_link_state *state);
+	void	(*phylink_mac_an_restart)(struct dsa_switch *ds, int port);
+	void	(*phylink_mac_link_down)(struct dsa_switch *ds, int port,
+					 unsigned int mode,
+					 phy_interface_t interface);
+	void	(*phylink_mac_link_up)(struct dsa_switch *ds, int port,
+				       unsigned int mode,
+				       phy_interface_t interface,
+				       struct phy_device *phydev);
+	void	(*phylink_fixed_state)(struct dsa_switch *ds, int port,
+				       struct phylink_link_state *state);
+	/*
 	 * ethtool hardware statistics.
 	 */
 	void	(*get_strings)(struct dsa_switch *ds, int port,
@@ -595,5 +619,6 @@ static inline int call_dsa_notifiers(unsigned long val, struct net_device *dev,
 int dsa_port_get_phy_strings(struct dsa_port *dp, uint8_t *data);
 int dsa_port_get_ethtool_phy_stats(struct dsa_port *dp, uint64_t *data);
 int dsa_port_get_phy_sset_count(struct dsa_port *dp);
+void dsa_port_phylink_mac_change(struct dsa_switch *ds, int port, bool up);
 
 #endif