Merge tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Export pcie_retrain_link() for use outside ASPM

   - Add Data Link Layer Link Active Reporting as another way for
     pcie_retrain_link() to determine the link is up

   - Work around link training failures (especially on the ASMedia
     ASM2824 switch) by training first at 2.5GT/s and then attempting
     higher rates

  Resource management:

   - When we coalesce host bridge windows, remove invalidated resources
     from the resource tree so future allocations work correctly

  Hotplug:

   - Cancel bringup sequence if card is not present, to keep from
     blinking Power Indicator indefinitely

   - Reassign bridge resources if necessary for ACPI hotplug

  Driver binding:

   - Convert platform_device .remove() callbacks to return void instead
     of a mostly useless int

  Power management:

   - Reduce wait time for secondary bus to be ready to speed up resume

   - Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
     D3cold

   - Call _REG when transitioning D-states so AML that uses the PCI
     config space OpRegion works, which fixes some ASMedia GPIO
     controllers after resume

  Virtualization:

   - Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
     hang when guest is rebooted

   - Add function 1 DMA alias quirk for Marvell 88SE9235

  Error handling:

   - Unexport pci_save_aer_state() since it's only used in drivers/pci/

   - Drop recommendation for drivers to configure AER Capability, since
     the PCI core does this for all devices

  ASPM:

   - Disable ASPM on MFD function removal to avoid use-after-free

   - Tighten up pci_enable_link_state() and pci_disable_link_state()
     interfaces so they don't enable/disable states the driver didn't
     specify

   - Avoid link retraining race that can happen if ASPM sets link
     control parameters while the link is in the midst of training for
     some other reason

  Endpoint framework:

   - Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
     different from "PCI Endpoint NTB driver"

   - Automatically create a function specific attributes group for
     endpoint drivers to avoid reference counting issues

   - Fix many EPC test issues

   - Return pci_epf_type_add_cfs() error if EPF has no driver

   - Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
     MSI vector parameters

   - Pass EPF device ID to driver probe functions

   - Return -EALREADY if EPC has already been started/stopped

   - Add linkdown notifier support and use it in qcom-ep

   - Add Bus Master Enable event support and use it in qcom-ep

   - Add Qualcomm Modem Host Interface (MHI) endpoint driver

   - Add Layerscape PME interrupt handling to manage link-up
     notification

  Cadence PCIe controller driver:

   - Wait for link retrain to complete when working around the J721E
     i2085 erratum with Gen2 mode

  Faraday FTPC100 PCI controller driver:

   - Release clock resources on error paths

  Freescale i.MX6 PCIe controller driver:

   - Save and restore Root Port MSI control to work around hardware defect

  Intel VMD host bridge driver:

   - Reset VMD config register between soft reboots

   - Capture pci_reset_bus() return value instead of printing junk when
     it fails

  Qualcomm PCIe controller driver:

   - Add SDX65 endpoint compatible string to DT binding

   - Disable register write access after init for IP v2.3.3, v2.9.0

   - Use DWC helpers for enabling/disabling writes to DBI registers

   - Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
     v2.3.3, v2.7.0, v2.9.0

   - Reuse v2.3.2 post-init sequence for v2.4.0

  Renesas R-Car PCIe controller driver:

   - Remove unused static pcie_base and pcie_dev

  Rockchip PCIe controller driver:

   - Remove writes to unused registers

   - Write endpoint Device ID using correct register

   - Assert PCI Configuration Enable bit after probe so endpoint
     responds instead of generating Request Retry Status messages

   - Poll waiting for PHY PLLs to lock

   - Update RK3399 example DT binding to be valid

   - Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
     manually generating PCIe message

   - Use multiple windows to avoid address translation conflicts

   - Use u32 (not u16) when accessing 32-bit registers

   - Hide MSI-X Capability, since RK3399 can't generate MSI-X

   - Set endpoint controller required alignment to 256

  Synopsys DesignWare PCIe controller driver:

   - Wait for link to come up only if we've initiated link training

  Miscellaneous:

   - Add pci_clear_master() stub for non-CONFIG_PCI"

* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
  Documentation: PCI: correct spelling
  PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
  PCI: xgene-msi: Convert to platform remove callback returning void
  PCI: tegra: Convert to platform remove callback returning void
  PCI: rockchip-host: Convert to platform remove callback returning void
  PCI: mvebu: Convert to platform remove callback returning void
  PCI: mt7621: Convert to platform remove callback returning void
  PCI: mediatek-gen3: Convert to platform remove callback returning void
  PCI: mediatek: Convert to platform remove callback returning void
  PCI: iproc: Convert to platform remove callback returning void
  PCI: hisi-error: Convert to platform remove callback returning void
  PCI: dwc: Convert to platform remove callback returning void
  PCI: j721e: Convert to platform remove callback returning void
  PCI: brcmstb: Convert to platform remove callback returning void
  PCI: altera-msi: Convert to platform remove callback returning void
  PCI: altera: Convert to platform remove callback returning void
  PCI: aardvark: Convert to platform remove callback returning void
  PCI: rcar: Use correct product family name for Renesas R-Car
  PCI: layerscape: Add the endpoint linkup notifier support
  PCI: endpoint: pci-epf-vntb: Fix typo in comments
  ...

1 files changed, 38 insertions, 35 deletions

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 4ab30892f6ef..7a87a47eb7ed 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -61,7 +61,6 @@
 /* DBI registers */
 #define AXI_MSTR_RESP_COMP_CTRL0		0x818
 #define AXI_MSTR_RESP_COMP_CTRL1		0x81c
-#define MISC_CONTROL_1_REG			0x8bc
 
 /* MHI registers */
 #define PARF_DEBUG_CNT_PM_LINKST_IN_L2		0xc04
@@ -132,9 +131,6 @@
 /* AXI_MSTR_RESP_COMP_CTRL1 register fields */
 #define CFG_BRIDGE_SB_INIT			BIT(0)
 
-/* MISC_CONTROL_1_REG register fields */
-#define DBI_RO_WR_EN				1
-
 /* PCI_EXP_SLTCAP register fields */
 #define PCIE_CAP_SLOT_POWER_LIMIT_VAL		FIELD_PREP(PCI_EXP_SLTCAP_SPLV, 250)
 #define PCIE_CAP_SLOT_POWER_LIMIT_SCALE		FIELD_PREP(PCI_EXP_SLTCAP_SPLS, 1)
@@ -144,7 +140,6 @@
 						PCI_EXP_SLTCAP_AIP | \
 						PCI_EXP_SLTCAP_PIP | \
 						PCI_EXP_SLTCAP_HPS | \
-						PCI_EXP_SLTCAP_HPC | \
 						PCI_EXP_SLTCAP_EIP | \
 						PCIE_CAP_SLOT_POWER_LIMIT_VAL | \
 						PCIE_CAP_SLOT_POWER_LIMIT_SCALE)
@@ -274,6 +269,20 @@ static int qcom_pcie_start_link(struct dw_pcie *pci)
 	return 0;
 }
 
+static void qcom_pcie_clear_hpc(struct dw_pcie *pci)
+{
+	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+	u32 val;
+
+	dw_pcie_dbi_ro_wr_en(pci);
+
+	val = readl(pci->dbi_base + offset + PCI_EXP_SLTCAP);
+	val &= ~PCI_EXP_SLTCAP_HPC;
+	writel(val, pci->dbi_base + offset + PCI_EXP_SLTCAP);
+
+	dw_pcie_dbi_ro_wr_dis(pci);
+}
+
 static void qcom_pcie_2_1_0_ltssm_enable(struct qcom_pcie *pcie)
 {
 	u32 val;
@@ -429,6 +438,8 @@ static int qcom_pcie_post_init_2_1_0(struct qcom_pcie *pcie)
 	writel(CFG_BRIDGE_SB_INIT,
 	       pci->dbi_base + AXI_MSTR_RESP_COMP_CTRL1);
 
+	qcom_pcie_clear_hpc(pcie->pci);
+
 	return 0;
 }
 
@@ -512,6 +523,8 @@ static int qcom_pcie_post_init_1_0_0(struct qcom_pcie *pcie)
 		writel(val, pcie->parf + PARF_AXI_MSTR_WR_ADDR_HALT);
 	}
 
+	qcom_pcie_clear_hpc(pcie->pci);
+
 	return 0;
 }
 
@@ -607,6 +620,8 @@ static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
 	val |= EN;
 	writel(val, pcie->parf + PARF_AXI_MSTR_WR_ADDR_HALT_V2);
 
+	qcom_pcie_clear_hpc(pcie->pci);
+
 	return 0;
 }
 
@@ -692,34 +707,6 @@ static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
 	return 0;
 }
 
-static int qcom_pcie_post_init_2_4_0(struct qcom_pcie *pcie)
-{
-	u32 val;
-
-	/* enable PCIe clocks and resets */
-	val = readl(pcie->parf + PARF_PHY_CTRL);
-	val &= ~PHY_TEST_PWR_DOWN;
-	writel(val, pcie->parf + PARF_PHY_CTRL);
-
-	/* change DBI base address */
-	writel(0, pcie->parf + PARF_DBI_BASE_ADDR);
-
-	/* MAC PHY_POWERDOWN MUX DISABLE  */
-	val = readl(pcie->parf + PARF_SYS_CTRL);
-	val &= ~MAC_PHY_POWERDOWN_IN_P2_D_MUX_EN;
-	writel(val, pcie->parf + PARF_SYS_CTRL);
-
-	val = readl(pcie->parf + PARF_MHI_CLOCK_RESET_CTRL);
-	val |= BYPASS;
-	writel(val, pcie->parf + PARF_MHI_CLOCK_RESET_CTRL);
-
-	val = readl(pcie->parf + PARF_AXI_MSTR_WR_ADDR_HALT_V2);
-	val |= EN;
-	writel(val, pcie->parf + PARF_AXI_MSTR_WR_ADDR_HALT_V2);
-
-	return 0;
-}
-
 static int qcom_pcie_get_resources_2_3_3(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
@@ -826,7 +813,9 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
 	writel(0, pcie->parf + PARF_Q2A_FLUSH);
 
 	writel(PCI_COMMAND_MASTER, pci->dbi_base + PCI_COMMAND);
-	writel(DBI_RO_WR_EN, pci->dbi_base + MISC_CONTROL_1_REG);
+
+	dw_pcie_dbi_ro_wr_en(pci);
+
 	writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
 
 	val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
@@ -836,6 +825,8 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
 	writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset +
 		PCI_EXP_DEVCTL2);
 
+	dw_pcie_dbi_ro_wr_dis(pci);
+
 	return 0;
 }
 
@@ -966,6 +957,13 @@ err_disable_regulators:
 	return ret;
 }
 
+static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
+{
+	qcom_pcie_clear_hpc(pcie->pci);
+
+	return 0;
+}
+
 static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
@@ -1136,6 +1134,7 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
 	writel(0, pcie->parf + PARF_Q2A_FLUSH);
 
 	dw_pcie_dbi_ro_wr_en(pci);
+
 	writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
 
 	val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
@@ -1145,6 +1144,8 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
 	writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset +
 			PCI_EXP_DEVCTL2);
 
+	dw_pcie_dbi_ro_wr_dis(pci);
+
 	for (i = 0; i < 256; i++)
 		writel(0, pcie->parf + PARF_BDF_TO_SID_TABLE_N + (4 * i));
 
@@ -1251,7 +1252,7 @@ static const struct qcom_pcie_ops ops_2_3_2 = {
 static const struct qcom_pcie_ops ops_2_4_0 = {
 	.get_resources = qcom_pcie_get_resources_2_4_0,
 	.init = qcom_pcie_init_2_4_0,
-	.post_init = qcom_pcie_post_init_2_4_0,
+	.post_init = qcom_pcie_post_init_2_3_2,
 	.deinit = qcom_pcie_deinit_2_4_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
@@ -1269,6 +1270,7 @@ static const struct qcom_pcie_ops ops_2_3_3 = {
 static const struct qcom_pcie_ops ops_2_7_0 = {
 	.get_resources = qcom_pcie_get_resources_2_7_0,
 	.init = qcom_pcie_init_2_7_0,
+	.post_init = qcom_pcie_post_init_2_7_0,
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
@@ -1277,6 +1279,7 @@ static const struct qcom_pcie_ops ops_2_7_0 = {
 static const struct qcom_pcie_ops ops_1_9_0 = {
 	.get_resources = qcom_pcie_get_resources_2_7_0,
 	.init = qcom_pcie_init_2_7_0,
+	.post_init = qcom_pcie_post_init_2_7_0,
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 	.config_sid = qcom_pcie_config_sid_1_9_0,