Merge tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Richard Weinberger:
 "NAND core changes:
   - Drop useless 'depends on' in Kconfig
   - Add an extra level in the Kconfig hierarchy
   - Trivial spellings
   - Dynamic allocation of the interface configurations
   - Dropping the default ONFI timing mode
   - Various cleanup (types, structures, naming, comments)
   - Hide the chip->data_interface indirection
   - Add the generic rb-gpios property
   - Add the ->choose_interface_config() hook
   - Introduce nand_choose_best_sdr_timings()
   - Use default values for tPROG_max and tBERS_max
   - Avoid redefining tR_max and tCCS_min
   - Add a helper to find the closest ONFI mode
   - bcm63xx MTD parsers: simplify CFE detection

  Raw NAND controller drivers changes:
   - fsl-upm: Deprecation of specific DT properties
   - fsl_upm: Driver rework and cleanup in favor of ->exec_op()
   - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
   - brcmnand: ECC error handling on EDU transfers
   - brcmnand: Don't default to EDU transfers
   - qcom: Set BAM mode only if not set already
   - qcom: Avoid write to unavailable register
   - gpio: Driver rework in favor of ->exec_op()
   - tango: ->exec_op() conversion
   - mtk: ->exec_op() conversion

  Raw NAND chip drivers changes:
   - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4
   - toshiba: Implement ->choose_interface_config() for TC58NVG0S3E
   - toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00
   - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC

  HyperBus changes:
   - DMA support for TI's AM654 HyperBus controller driver.
   - HyperBus frontend driver for Renesas RPC-IF driver.

  SPI NOR core changes:
   - Support for Winbond w25q64jwm flash
   - Enable 4K sector support for mx25l12805d

  SPI NOR controller drivers changes:
   - intel-spi Add Alder Lake-S PCI ID

  MTD Core changes:
   - mtdoops: Don't run panic write twice
   - mtdconcat: Correctly handle panic write
   - Use DEFINE_SHOW_ATTRIBUTE"

* tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits)
  mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled
  mtd: hyperbus: add Renesas RPC-IF driver
  Revert "mtd: spi-nor: Prefer asynchronous probe"
  mtd: parsers: bcm63xx: Do not make it modular
  mtd: spear_smi: Enable compile testing
  mtd: maps: vmu-flash: fix typos for struct memcard
  mtd: physmap: Add Baikal-T1 physically mapped ROM support
  mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu
  mtd: onenand: simplify the return expression of onenand_transfer_auto_oob
  mtd: rawnand: cadence: remove a redundant dev_err call
  mtd: rawnand: ams-delta: Fix non-OF build warning
  mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops()
  mtd: rawnand: Introduce nand_set_ecc_on_host_ops()
  mtd: rawnand: atmel: Check return values for nand_read_data_op
  mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size()
  mtd: rawnand: qcom: Simplify with dev_err_probe()
  mtd: rawnand: marvell: Fix and update kerneldoc
  mtd: rawnand: marvell: Simplify with dev_err_probe()
  mtd: rawnand: gpmi: Simplify with dev_err_probe()
  mtd: rawnand: atmel: Simplify with dev_err_probe()
  ...

1 files changed, 11 insertions, 11 deletions

diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
index eb7fcfd9276b..512f60780a50 100644
--- a/drivers/mtd/nand/raw/omap2.c
+++ b/drivers/mtd/nand/raw/omap2.c
@@ -884,8 +884,8 @@ static int omap_correct_data(struct nand_chip *chip, u_char *dat,
 	int stat = 0;
 
 	/* Ex NAND_ECC_HW12_2048 */
-	if ((info->nand.ecc.mode == NAND_ECC_HW) &&
-			(info->nand.ecc.size  == 2048))
+	if (info->nand.ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST &&
+	    info->nand.ecc.size == 2048)
 		blockCnt = 4;
 	else
 		blockCnt = 1;
@@ -2006,12 +2006,12 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
 		return -EINVAL;
 
 	/*
-	 * Bail out earlier to let NAND_ECC_SOFT code create its own
+	 * Bail out earlier to let NAND_ECC_ENGINE_TYPE_SOFT code create its own
 	 * ooblayout instead of using ours.
 	 */
 	if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) {
-		chip->ecc.mode = NAND_ECC_SOFT;
-		chip->ecc.algo = NAND_ECC_HAMMING;
+		chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+		chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
 		return 0;
 	}
 
@@ -2019,7 +2019,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
 	switch (info->ecc_opt) {
 	case OMAP_ECC_HAM1_CODE_HW:
 		dev_info(dev, "nand: using OMAP_ECC_HAM1_CODE_HW\n");
-		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST;
 		chip->ecc.bytes		= 3;
 		chip->ecc.size		= 512;
 		chip->ecc.strength	= 1;
@@ -2036,7 +2036,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
 
 	case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
 		pr_info("nand: using OMAP_ECC_BCH4_CODE_HW_DETECTION_SW\n");
-		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST;
 		chip->ecc.size		= 512;
 		chip->ecc.bytes		= 7;
 		chip->ecc.strength	= 4;
@@ -2056,7 +2056,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
 
 	case OMAP_ECC_BCH4_CODE_HW:
 		pr_info("nand: using OMAP_ECC_BCH4_CODE_HW ECC scheme\n");
-		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST;
 		chip->ecc.size		= 512;
 		/* 14th bit is kept reserved for ROM-code compatibility */
 		chip->ecc.bytes		= 7 + 1;
@@ -2078,7 +2078,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
 
 	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
 		pr_info("nand: using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n");
-		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST;
 		chip->ecc.size		= 512;
 		chip->ecc.bytes		= 13;
 		chip->ecc.strength	= 8;
@@ -2098,7 +2098,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
 
 	case OMAP_ECC_BCH8_CODE_HW:
 		pr_info("nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme\n");
-		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST;
 		chip->ecc.size		= 512;
 		/* 14th bit is kept reserved for ROM-code compatibility */
 		chip->ecc.bytes		= 13 + 1;
@@ -2121,7 +2121,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
 
 	case OMAP_ECC_BCH16_CODE_HW:
 		pr_info("Using OMAP_ECC_BCH16_CODE_HW ECC scheme\n");
-		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST;
 		chip->ecc.size		= 512;
 		chip->ecc.bytes		= 26;
 		chip->ecc.strength	= 16;