Merge tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Richard Weinberger:
 "NAND core changes:
   - Drop useless 'depends on' in Kconfig
   - Add an extra level in the Kconfig hierarchy
   - Trivial spellings
   - Dynamic allocation of the interface configurations
   - Dropping the default ONFI timing mode
   - Various cleanup (types, structures, naming, comments)
   - Hide the chip->data_interface indirection
   - Add the generic rb-gpios property
   - Add the ->choose_interface_config() hook
   - Introduce nand_choose_best_sdr_timings()
   - Use default values for tPROG_max and tBERS_max
   - Avoid redefining tR_max and tCCS_min
   - Add a helper to find the closest ONFI mode
   - bcm63xx MTD parsers: simplify CFE detection

  Raw NAND controller drivers changes:
   - fsl-upm: Deprecation of specific DT properties
   - fsl_upm: Driver rework and cleanup in favor of ->exec_op()
   - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
   - brcmnand: ECC error handling on EDU transfers
   - brcmnand: Don't default to EDU transfers
   - qcom: Set BAM mode only if not set already
   - qcom: Avoid write to unavailable register
   - gpio: Driver rework in favor of ->exec_op()
   - tango: ->exec_op() conversion
   - mtk: ->exec_op() conversion

  Raw NAND chip drivers changes:
   - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4
   - toshiba: Implement ->choose_interface_config() for TC58NVG0S3E
   - toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00
   - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC

  HyperBus changes:
   - DMA support for TI's AM654 HyperBus controller driver.
   - HyperBus frontend driver for Renesas RPC-IF driver.

  SPI NOR core changes:
   - Support for Winbond w25q64jwm flash
   - Enable 4K sector support for mx25l12805d

  SPI NOR controller drivers changes:
   - intel-spi Add Alder Lake-S PCI ID

  MTD Core changes:
   - mtdoops: Don't run panic write twice
   - mtdconcat: Correctly handle panic write
   - Use DEFINE_SHOW_ATTRIBUTE"

* tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits)
  mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled
  mtd: hyperbus: add Renesas RPC-IF driver
  Revert "mtd: spi-nor: Prefer asynchronous probe"
  mtd: parsers: bcm63xx: Do not make it modular
  mtd: spear_smi: Enable compile testing
  mtd: maps: vmu-flash: fix typos for struct memcard
  mtd: physmap: Add Baikal-T1 physically mapped ROM support
  mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu
  mtd: onenand: simplify the return expression of onenand_transfer_auto_oob
  mtd: rawnand: cadence: remove a redundant dev_err call
  mtd: rawnand: ams-delta: Fix non-OF build warning
  mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops()
  mtd: rawnand: Introduce nand_set_ecc_on_host_ops()
  mtd: rawnand: atmel: Check return values for nand_read_data_op
  mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size()
  mtd: rawnand: qcom: Simplify with dev_err_probe()
  mtd: rawnand: marvell: Fix and update kerneldoc
  mtd: rawnand: marvell: Simplify with dev_err_probe()
  mtd: rawnand: gpmi: Simplify with dev_err_probe()
  mtd: rawnand: atmel: Simplify with dev_err_probe()
  ...

1 files changed, 7 insertions, 5 deletions

diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index ad1b55dab211..57f1f1708994 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1253,21 +1253,23 @@ static int mtk_nfc_set_spare_per_sector(u32 *sps, struct mtd_info *mtd)
 static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
 {
 	struct nand_chip *nand = mtd_to_nand(mtd);
+	const struct nand_ecc_props *requirements =
+		nanddev_get_ecc_requirements(&nand->base);
 	struct mtk_nfc *nfc = nand_get_controller_data(nand);
 	u32 spare;
 	int free, ret;
 
 	/* support only ecc hw mode */
-	if (nand->ecc.mode != NAND_ECC_HW) {
-		dev_err(dev, "ecc.mode not supported\n");
+	if (nand->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
+		dev_err(dev, "ecc.engine_type not supported\n");
 		return -EINVAL;
 	}
 
 	/* if optional dt settings not present */
 	if (!nand->ecc.size || !nand->ecc.strength) {
 		/* use datasheet requirements */
-		nand->ecc.strength = nand->base.eccreq.strength;
-		nand->ecc.size = nand->base.eccreq.step_size;
+		nand->ecc.strength = requirements->strength;
+		nand->ecc.size = requirements->step_size;
 
 		/*
 		 * align eccstrength and eccsize
@@ -1416,7 +1418,7 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
 	nand->options |= NAND_USES_DMA | NAND_SUBPAGE_READ;
 
 	/* set default mode in case dt entry is missing */
-	nand->ecc.mode = NAND_ECC_HW;
+	nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 
 	nand->ecc.write_subpage = mtk_nfc_write_subpage_hwecc;
 	nand->ecc.write_page_raw = mtk_nfc_write_page_raw;