Merge tag 'iio-fixes-for-5.10a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO and counter fixes for the 5.10 cycle.

IIO

cros_ec
 - Provide defauts for max and min frequency when older machines fail
   to return them correctly.
ingenic-adc
 - Fix wrong vref value for JZ4770 SoC
 - Fix AUX / VBAT readings when touchscreen in use by pausing touchscreen
   readings during a read of these channels.
kxcjk1013
 - Fix an issue with KIOX010A ACPI id using devices which need to run
   a ACPI device specific method to avoid leaving the keyboard disabled.
   Includes a minor precursor patch to make this fix easier to do.
mt6577-auxadc
 - Fix an issue with dev_comp not being set resulting in a null ptr deref.
st_lsm6dsx
 - Set a 10ms min shub slave timeout to handle fast snesors where more time
   is needed to set up the config than the cycles allowed.
stm32-adc
 - Fix an issue due to a clash between an ADC configured to use IRQs and
   a second configured to use DMA cause by some incorrect register masking.
vcnl4035
 - Kconfig missing dependency

Counter

ti-eqep
 - wrong value for max_register as one beyond the end instead of the end.

* tag 'iio-fixes-for-5.10a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode
  iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum
  iio: light: fix kconfig dependency bug for VCNL4035
  iio/adc: ingenic: Fix AUX/VBAT readings when touchscreen is used
  iio/adc: ingenic: Fix battery VREF for JZ4770 SoC
  iio: imu: st_lsm6dsx: set 10ms as min shub slave timeout
  counter/ti-eqep: Fix regmap max_register
  iio: adc: stm32-adc: fix a regression when using dma and irq
  iio: adc: mediatek: fix unset field
  iio: cros_ec: Use default frequencies when EC returns invalid information

1 files changed, 17 insertions, 24 deletions

diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index cd870c089182..a83199b212a4 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -41,18 +41,16 @@
  * struct stm32_adc_common_regs - stm32 common registers
  * @csr:	common status register offset
  * @ccr:	common control register offset
- * @eoc1_msk:	adc1 end of conversion flag in @csr
- * @eoc2_msk:	adc2 end of conversion flag in @csr
- * @eoc3_msk:	adc3 end of conversion flag in @csr
+ * @eoc_msk:    array of eoc (end of conversion flag) masks in csr for adc1..n
+ * @ovr_msk:    array of ovr (overrun flag) masks in csr for adc1..n
  * @ier:	interrupt enable register offset for each adc
  * @eocie_msk:	end of conversion interrupt enable mask in @ier
  */
 struct stm32_adc_common_regs {
 	u32 csr;
 	u32 ccr;
-	u32 eoc1_msk;
-	u32 eoc2_msk;
-	u32 eoc3_msk;
+	u32 eoc_msk[STM32_ADC_MAX_ADCS];
+	u32 ovr_msk[STM32_ADC_MAX_ADCS];
 	u32 ier;
 	u32 eocie_msk;
 };
@@ -282,21 +280,20 @@ out:
 static const struct stm32_adc_common_regs stm32f4_adc_common_regs = {
 	.csr = STM32F4_ADC_CSR,
 	.ccr = STM32F4_ADC_CCR,
-	.eoc1_msk = STM32F4_EOC1 | STM32F4_OVR1,
-	.eoc2_msk = STM32F4_EOC2 | STM32F4_OVR2,
-	.eoc3_msk = STM32F4_EOC3 | STM32F4_OVR3,
+	.eoc_msk = { STM32F4_EOC1, STM32F4_EOC2, STM32F4_EOC3},
+	.ovr_msk = { STM32F4_OVR1, STM32F4_OVR2, STM32F4_OVR3},
 	.ier = STM32F4_ADC_CR1,
-	.eocie_msk = STM32F4_EOCIE | STM32F4_OVRIE,
+	.eocie_msk = STM32F4_EOCIE,
 };
 
 /* STM32H7 common registers definitions */
 static const struct stm32_adc_common_regs stm32h7_adc_common_regs = {
 	.csr = STM32H7_ADC_CSR,
 	.ccr = STM32H7_ADC_CCR,
-	.eoc1_msk = STM32H7_EOC_MST | STM32H7_OVR_MST,
-	.eoc2_msk = STM32H7_EOC_SLV | STM32H7_OVR_SLV,
+	.eoc_msk = { STM32H7_EOC_MST, STM32H7_EOC_SLV},
+	.ovr_msk = { STM32H7_OVR_MST, STM32H7_OVR_SLV},
 	.ier = STM32H7_ADC_IER,
-	.eocie_msk = STM32H7_EOCIE | STM32H7_OVRIE,
+	.eocie_msk = STM32H7_EOCIE,
 };
 
 static const unsigned int stm32_adc_offset[STM32_ADC_MAX_ADCS] = {
@@ -318,6 +315,7 @@ static void stm32_adc_irq_handler(struct irq_desc *desc)
 {
 	struct stm32_adc_priv *priv = irq_desc_get_handler_data(desc);
 	struct irq_chip *chip = irq_desc_get_chip(desc);
+	int i;
 	u32 status;
 
 	chained_irq_enter(chip, desc);
@@ -335,17 +333,12 @@ static void stm32_adc_irq_handler(struct irq_desc *desc)
 	 * before invoking the interrupt handler (e.g. call ISR only for
 	 * IRQ-enabled ADCs).
 	 */
-	if (status & priv->cfg->regs->eoc1_msk &&
-	    stm32_adc_eoc_enabled(priv, 0))
-		generic_handle_irq(irq_find_mapping(priv->domain, 0));
-
-	if (status & priv->cfg->regs->eoc2_msk &&
-	    stm32_adc_eoc_enabled(priv, 1))
-		generic_handle_irq(irq_find_mapping(priv->domain, 1));
-
-	if (status & priv->cfg->regs->eoc3_msk &&
-	    stm32_adc_eoc_enabled(priv, 2))
-		generic_handle_irq(irq_find_mapping(priv->domain, 2));
+	for (i = 0; i < priv->cfg->num_irqs; i++) {
+		if ((status & priv->cfg->regs->eoc_msk[i] &&
+		     stm32_adc_eoc_enabled(priv, i)) ||
+		     (status & priv->cfg->regs->ovr_msk[i]))
+			generic_handle_irq(irq_find_mapping(priv->domain, i));
+	}
 
 	chained_irq_exit(chip, desc);
 };