Merge tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
 "Nothing particular important in the SoC driver updates, just the usual
  improvements to for drivers/soc and a couple of subsystems that don't
  fit anywhere else:

   - The largest set of updates is for Qualcomm SoC drivers, extending
     the set of supported features for additional SoCs in the QSEECOM,
     LLCC and socinfo drivers.a

   - The ti_sci firmware driver gains support for power managment

   - The drivers/reset subsystem sees a rework of the microchip sparx5
     and amlogic reset drivers to support additional chips, plus a few
     minor updates on other platforms

   - The SCMI firmware interface driver gains support for two protocol
     extensions, allowing more flexible use of the shared memory area
     and new DT binding properties for configurability.

   - Mediatek SoC drivers gain support for power managment on the MT8188
     SoC and a new driver for DVFS.

   - The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
     and a few bugfixes

   - The Hisilicon Kunpeng HCCS driver gains support for configuring
     lanes through sysfs

  Finally, there are cleanups and minor fixes for drivers/{soc, bus,
  memory}, including changing back the .remove_new callback to .remove,
  as well as a few other updates for freescale (powerpc) soc drivers,
  NXP i.MX soc drivers, cznic turris platform driver, memory controller
  drviers, TI OMAP SoC drivers, and Tegra firmware drivers"

* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
  soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
  soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
  soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
  platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
  platform: cznic: turris-omnia-mcu: Document the driver private data structure
  firmware: turris-mox-rwtm: Document the driver private data structure
  bus: Switch back to struct platform_driver::remove()
  soc: qcom: ice: Remove the device_link field in qcom_ice
  drm/msm/adreno: Setup SMMU aparture for per-process page table
  firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
  firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
  soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
  dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
  soc: qcom: llcc: Flip the manual slice configuration condition
  dt-bindings: firmware: qcom,scm: Document sm8750 SCM
  firmware: qcom: uefisecapp: Allow X1E Devkit devices
  misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
  misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
  soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
  dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
  ...

1 files changed, 161 insertions, 1 deletions

diff --git a/drivers/firmware/xilinx/zynqmp-debug.c b/drivers/firmware/xilinx/zynqmp-debug.c
index 8528850af889..22853ae0efdf 100644
--- a/drivers/firmware/xilinx/zynqmp-debug.c
+++ b/drivers/firmware/xilinx/zynqmp-debug.c
@@ -31,13 +31,51 @@ static char debugfs_buf[PAGE_SIZE];
 
 #define PM_API(id)		 {id, #id, strlen(#id)}
 static struct pm_api_info pm_api_list[] = {
+	PM_API(PM_FORCE_POWERDOWN),
+	PM_API(PM_REQUEST_WAKEUP),
+	PM_API(PM_SYSTEM_SHUTDOWN),
+	PM_API(PM_REQUEST_NODE),
+	PM_API(PM_RELEASE_NODE),
+	PM_API(PM_SET_REQUIREMENT),
 	PM_API(PM_GET_API_VERSION),
+	PM_API(PM_REGISTER_NOTIFIER),
+	PM_API(PM_RESET_ASSERT),
+	PM_API(PM_RESET_GET_STATUS),
+	PM_API(PM_GET_CHIPID),
+	PM_API(PM_PINCTRL_SET_FUNCTION),
+	PM_API(PM_PINCTRL_CONFIG_PARAM_GET),
+	PM_API(PM_PINCTRL_CONFIG_PARAM_SET),
+	PM_API(PM_IOCTL),
+	PM_API(PM_CLOCK_ENABLE),
+	PM_API(PM_CLOCK_DISABLE),
+	PM_API(PM_CLOCK_GETSTATE),
+	PM_API(PM_CLOCK_SETDIVIDER),
+	PM_API(PM_CLOCK_GETDIVIDER),
+	PM_API(PM_CLOCK_SETPARENT),
+	PM_API(PM_CLOCK_GETPARENT),
 	PM_API(PM_QUERY_DATA),
 };
 
 static struct dentry *firmware_debugfs_root;
 
 /**
+ * zynqmp_pm_ioctl - PM IOCTL for device control and configs
+ * @node:	Node ID of the device
+ * @ioctl:	ID of the requested IOCTL
+ * @arg1:	Argument 1 of requested IOCTL call
+ * @arg2:	Argument 2 of requested IOCTL call
+ * @arg3:	Argument 3 of requested IOCTL call
+ * @out:	Returned output value
+ *
+ * Return:	Returns status, either success or error+reason
+ */
+static int zynqmp_pm_ioctl(const u32 node, const u32 ioctl, const u32 arg1,
+			   const u32 arg2, const u32 arg3, u32 *out)
+{
+	return zynqmp_pm_invoke_fn(PM_IOCTL, out, 5, node, ioctl, arg1, arg2, arg3);
+}
+
+/**
  * zynqmp_pm_argument_value() - Extract argument value from a PM-API request
  * @arg:	Entered PM-API argument in string format
  *
@@ -95,6 +133,128 @@ static int process_api_request(u32 pm_id, u64 *pm_api_arg, u32 *pm_api_ret)
 		sprintf(debugfs_buf, "PM-API Version = %d.%d\n",
 			pm_api_version >> 16, pm_api_version & 0xffff);
 		break;
+	case PM_FORCE_POWERDOWN:
+		ret = zynqmp_pm_force_pwrdwn(pm_api_arg[0],
+					     pm_api_arg[1] ? pm_api_arg[1] :
+					     ZYNQMP_PM_REQUEST_ACK_NO);
+		break;
+	case PM_REQUEST_WAKEUP:
+		ret = zynqmp_pm_request_wake(pm_api_arg[0],
+					     pm_api_arg[1], pm_api_arg[2],
+					     pm_api_arg[3] ? pm_api_arg[3] :
+					     ZYNQMP_PM_REQUEST_ACK_NO);
+		break;
+	case PM_SYSTEM_SHUTDOWN:
+		ret = zynqmp_pm_system_shutdown(pm_api_arg[0], pm_api_arg[1]);
+		break;
+	case PM_REQUEST_NODE:
+		ret = zynqmp_pm_request_node(pm_api_arg[0],
+					     pm_api_arg[1] ? pm_api_arg[1] :
+					     ZYNQMP_PM_CAPABILITY_ACCESS,
+					     pm_api_arg[2] ? pm_api_arg[2] : 0,
+					     pm_api_arg[3] ? pm_api_arg[3] :
+					     ZYNQMP_PM_REQUEST_ACK_BLOCKING);
+		break;
+	case PM_RELEASE_NODE:
+		ret = zynqmp_pm_release_node(pm_api_arg[0]);
+		break;
+	case PM_SET_REQUIREMENT:
+		ret = zynqmp_pm_set_requirement(pm_api_arg[0],
+						pm_api_arg[1] ? pm_api_arg[1] :
+						ZYNQMP_PM_CAPABILITY_CONTEXT,
+						pm_api_arg[2] ?
+						pm_api_arg[2] : 0,
+						pm_api_arg[3] ? pm_api_arg[3] :
+						ZYNQMP_PM_REQUEST_ACK_BLOCKING);
+		break;
+	case PM_REGISTER_NOTIFIER:
+		ret = zynqmp_pm_register_notifier(pm_api_arg[0],
+						  pm_api_arg[1] ?
+						  pm_api_arg[1] : 0,
+						  pm_api_arg[2] ?
+						  pm_api_arg[2] : 0,
+						  pm_api_arg[3] ?
+						  pm_api_arg[3] : 0);
+		break;
+	case PM_RESET_ASSERT:
+		ret = zynqmp_pm_reset_assert(pm_api_arg[0], pm_api_arg[1]);
+		break;
+	case PM_RESET_GET_STATUS:
+		ret = zynqmp_pm_reset_get_status(pm_api_arg[0], &pm_api_ret[0]);
+		if (!ret)
+			sprintf(debugfs_buf, "Reset status: %u\n",
+				pm_api_ret[0]);
+		break;
+	case PM_GET_CHIPID:
+		ret = zynqmp_pm_get_chipid(&pm_api_ret[0], &pm_api_ret[1]);
+		if (!ret)
+			sprintf(debugfs_buf, "Idcode: %#x, Version:%#x\n",
+				pm_api_ret[0], pm_api_ret[1]);
+		break;
+	case PM_PINCTRL_SET_FUNCTION:
+		ret = zynqmp_pm_pinctrl_set_function(pm_api_arg[0],
+						     pm_api_arg[1]);
+		break;
+	case PM_PINCTRL_CONFIG_PARAM_GET:
+		ret = zynqmp_pm_pinctrl_get_config(pm_api_arg[0], pm_api_arg[1],
+						   &pm_api_ret[0]);
+		if (!ret)
+			sprintf(debugfs_buf,
+				"Pin: %llu, Param: %llu, Value: %u\n",
+				pm_api_arg[0], pm_api_arg[1],
+				pm_api_ret[0]);
+		break;
+	case PM_PINCTRL_CONFIG_PARAM_SET:
+		ret = zynqmp_pm_pinctrl_set_config(pm_api_arg[0],
+						   pm_api_arg[1],
+						   pm_api_arg[2]);
+		break;
+	case PM_IOCTL:
+		ret = zynqmp_pm_ioctl(pm_api_arg[0], pm_api_arg[1],
+				      pm_api_arg[2], pm_api_arg[3],
+				      pm_api_arg[4], &pm_api_ret[0]);
+		if (!ret && (pm_api_arg[1] == IOCTL_GET_RPU_OPER_MODE ||
+			     pm_api_arg[1] == IOCTL_GET_PLL_FRAC_MODE ||
+			     pm_api_arg[1] == IOCTL_GET_PLL_FRAC_DATA ||
+			     pm_api_arg[1] == IOCTL_READ_GGS ||
+			     pm_api_arg[1] == IOCTL_READ_PGGS ||
+			     pm_api_arg[1] == IOCTL_READ_REG))
+			sprintf(debugfs_buf, "IOCTL return value: %u\n",
+				pm_api_ret[1]);
+		if (!ret && pm_api_arg[1] == IOCTL_GET_QOS)
+			sprintf(debugfs_buf, "Default QoS: %u\nCurrent QoS: %u\n",
+				pm_api_ret[1], pm_api_ret[2]);
+		break;
+	case PM_CLOCK_ENABLE:
+		ret = zynqmp_pm_clock_enable(pm_api_arg[0]);
+		break;
+	case PM_CLOCK_DISABLE:
+		ret = zynqmp_pm_clock_disable(pm_api_arg[0]);
+		break;
+	case PM_CLOCK_GETSTATE:
+		ret = zynqmp_pm_clock_getstate(pm_api_arg[0], &pm_api_ret[0]);
+		if (!ret)
+			sprintf(debugfs_buf, "Clock state: %u\n",
+				pm_api_ret[0]);
+		break;
+	case PM_CLOCK_SETDIVIDER:
+		ret = zynqmp_pm_clock_setdivider(pm_api_arg[0], pm_api_arg[1]);
+		break;
+	case PM_CLOCK_GETDIVIDER:
+		ret = zynqmp_pm_clock_getdivider(pm_api_arg[0], &pm_api_ret[0]);
+		if (!ret)
+			sprintf(debugfs_buf, "Divider Value: %d\n",
+				pm_api_ret[0]);
+		break;
+	case PM_CLOCK_SETPARENT:
+		ret = zynqmp_pm_clock_setparent(pm_api_arg[0], pm_api_arg[1]);
+		break;
+	case PM_CLOCK_GETPARENT:
+		ret = zynqmp_pm_clock_getparent(pm_api_arg[0], &pm_api_ret[0]);
+		if (!ret)
+			sprintf(debugfs_buf,
+				"Clock parent Index: %u\n", pm_api_ret[0]);
+		break;
 	case PM_QUERY_DATA:
 		qdata.qid = pm_api_arg[0];
 		qdata.arg1 = pm_api_arg[1];
@@ -150,7 +310,7 @@ static ssize_t zynqmp_pm_debugfs_api_write(struct file *file,
 	char *kern_buff, *tmp_buff;
 	char *pm_api_req;
 	u32 pm_id = 0;
-	u64 pm_api_arg[4] = {0, 0, 0, 0};
+	u64 pm_api_arg[5] = {0, 0, 0, 0, 0};
 	/* Return values from PM APIs calls */
 	u32 pm_api_ret[4] = {0, 0, 0, 0};