cdx: add MSI support for CDX bus

Add CDX-MSI domain per CDX controller with gic-its domain as
a parent, to support MSI for CDX devices. CDX devices allocate
MSIs from the CDX domain. Also, introduce APIs to alloc and free
IRQs for CDX domain.

In CDX subsystem firmware is a controller for all devices and
their configuration. CDX bus controller sends all the write_msi_msg
commands to firmware running on RPU and the firmware interfaces with
actual devices to pass this information to devices

Since, CDX controller is the only way to communicate with the Firmware
for MSI write info, CDX domain per controller required in contrast to
having a CDX domain per device.

Co-developed-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Signed-off-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Co-developed-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20240226082816.100872-1-nipun.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 64 insertions, 0 deletions

diff --git a/drivers/cdx/controller/mc_cdx_pcol.h b/drivers/cdx/controller/mc_cdx_pcol.h
index 2de019406b57..832a44af963e 100644
--- a/drivers/cdx/controller/mc_cdx_pcol.h
+++ b/drivers/cdx/controller/mc_cdx_pcol.h
@@ -455,6 +455,12 @@
 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_REQUESTER_ID_OFST			84
 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_REQUESTER_ID_LEN			4
 
+/* MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_V2 msgresponse */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_V2_LEN				92
+/* Requester ID used by device for GIC ITS DeviceID */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_V2_REQUESTER_DEVICE_ID_OFST	88
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_V2_REQUESTER_DEVICE_ID_LEN		4
+
 /***********************************/
 /*
  * MC_CMD_CDX_BUS_DOWN
@@ -617,6 +623,64 @@
 #define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MMIO_REGIONS_ENABLE_WIDTH	1
 
 /***********************************/
+/*
+ * MC_CMD_CDX_DEVICE_WRITE_MSI_MSG
+ * Populates the MSI message to be used by the hardware to raise the specified
+ * interrupt vector. Versal-net implementation specific limitations are that
+ * only 4 CDX devices with MSI interrupt capability are supported and all
+ * vectors within a device must use the same write address. The command will
+ * return EINVAL if any of these limitations is violated.
+ */
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG					0x9
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_MSGSET				0x9
+#undef MC_CMD_0x9_PRIVILEGE_CTG
+
+#define MC_CMD_0x9_PRIVILEGE_CTG SRIOV_CTG_ADMIN
+
+/* MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN msgrequest */
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_LEN				28
+/* Device bus number, in range 0 to BUS_COUNT-1 */
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_BUS_OFST			0
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_BUS_LEN			4
+/* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_DEVICE_OFST			4
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_DEVICE_LEN			4
+/*
+ * Device-relative MSI vector number. Must be < MSI_COUNT reported for the
+ * device.
+ */
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_VECTOR_OFST		8
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_VECTOR_LEN		4
+/* Reserved (alignment) */
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_RESERVED_OFST		12
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_RESERVED_LEN			4
+/*
+ * MSI address to be used by the hardware. Typically, on ARM systems this
+ * address is translated by the IOMMU (if enabled) and it is the responsibility
+ * of the entity managing the IOMMU (APU kernel) to supply the correct IOVA
+ * here.
+ */
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_OFST		16
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_LEN		8
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_LO_OFST		16
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_LO_LEN		4
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_LO_LBN		128
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_LO_WIDTH		32
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_HI_OFST		20
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_HI_LEN		4
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_HI_LBN		160
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_HI_WIDTH		32
+/*
+ * MSI data to be used by the hardware. On versal-net, only the lower 16-bits
+ * are used, the remaining bits are ignored and should be set to zero.
+ */
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_DATA_OFST		24
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_DATA_LEN			4
+
+/* MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_OUT msgresponse */
+#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_OUT_LEN				0
+
+/***********************************/
 /* MC_CMD_V2_EXTN - Encapsulation for a v2 extended command */
 #define MC_CMD_V2_EXTN					0x7f