aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2023-02-05mips: ralink: make SOC_MT7621 select PINCTRL_MT7621 and fix help sectionArınç ÜNAL
The dt-binding of the MT7621 SoC uses the pinctrl driver. Therefore, have this driver selected by default. The help section for SOC_MT7621 exceeds 80 columns which is the preferred limit of a single line. A tab character is 8 columns. Rearrange the text accordingly. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-02-05MIPS: DTS: CI20: fix otg power gpioH. Nikolaus Schaller
According to schematics it is PF15 and not PF14 (MIC_SW_EN). Seems as if it was hidden and not noticed during testing since there is no sound DT node. Fixes: 158c774d3c64 ("MIPS: Ingenic: Add missing nodes for Ingenic SoCs and boards.") Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-02-05MIPS: dts: lantiq: Remove bogus interrupt-parent; lineJonathan Neuschäfer
Specifying interrupt-parent without a value (in other words, as a bool) doesn't really mean anything. Remove one such property in the Lantiq Danube DT, at /sram@1f000000/eiu@101000. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-01-27MIPS: Fix a compilation issuexurui
arch/mips/include/asm/mach-rc32434/pci.h:377: cc1: error: result of ‘-117440512 << 16’ requires 44 bits to represent, but ‘int’ only has 32 bits [-Werror=shift-overflow=] All bits in KORINA_STAT are already at the correct position, so there is no addtional shift needed. Signed-off-by: xurui <xurui@kylinos.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-01-27MIPS: remove CONFIG_MIPS_LD_CAN_LINK_VDSOMasahiro Yamada
Given commit e4412739472b ("Documentation: raise minimum supported version of binutils to 2.25"), CONFIG_MIPS_LD_CAN_LINK_VDSO is always 'y'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-01-27mips: Realtek RTL: select NO_EXCEPT_FILLSander Vanheule
The CPUs in these SoCs support MIPS32 R2, and allow ebase relocation. Even if the default exception base of 0x80000000 is used, the MIPS_GENERIC load address of 0x80100000 leaves sufficient space to not need an extra 0x400 bytes of padding. Suggested-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-01-27MIPS: OCTEON: octeon-usb: Consolidate error messagesLadislav Michl
Console output currently looks like USB clocks initialized succesfully even in case of error. Fix that and use consistently dev_err for fatal errors otherwise dev_warn. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-01-01Merge tag 'perf_urgent_for_v6.2_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Pass only an initialized perf event attribute to the LSM hook - Fix a use-after-free on the perf syscall's error path - A potential integer overflow fix in amd_core_pmu_init() - Fix the cgroup events tracking after the context handling rewrite - Return the proper value from the inherit_event() function on error * tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Call LSM hook after copying perf_event_attr perf: Fix use-after-free in error path perf/x86/amd: fix potential integer overflow on shift of a int perf/core: Fix cgroup events tracking perf core: Return error pointer if inherit_event() fails to find pmu_ctx
2023-01-01Merge tag 'x86_urgent_for_v6.2_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Two fixes to correct how kprobes handles INT3 now that they're added by other functionality like the rethunks and not only kgdb - Remove __init section markings of two functions which are referenced by a function in the .text section * tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK x86/calldepth: Fix incorrect init section references
2022-12-28Merge branch 'kvm-late-6.1-fixes' into HEADPaolo Bonzini
x86: * several fixes to nested VMX execution controls * fixes and clarification to the documentation for Xen emulation * do not unnecessarily release a pmu event with zero period * MMU fixes * fix Coverity warning in kvm_hv_flush_tlb() selftests: * fixes for the ucall mechanism in selftests * other fixes mostly related to compilation with clang
2022-12-28KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESETPaolo Bonzini
While KVM_XEN_EVTCHN_RESET is usually called with no vCPUs running, if that happened it could cause a deadlock. This is due to kvm_xen_eventfd_reset() doing a synchronize_srcu() inside a kvm->lock critical section. To avoid this, first collect all the evtchnfd objects in an array and free all of them once the kvm->lock critical section is over and th SRCU grace period has expired. Reported-by: Michal Luczaj <mhal@rbox.co> Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNKMasami Hiramatsu (Google)
Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping speculative execution after function return, kprobe jump optimization always fails on the functions with such INT3 inside the function body. (It already checks the INT3 padding between functions, but not inside the function) To avoid this issue, as same as kprobes, check whether the INT3 comes from kgdb or not, and if so, stop decoding and make it fail. The other INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be treated as a one-byte instruction. Fixes: e463a09af2f0 ("x86: Add straight-line-speculation mitigation") Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/167146051929.1374301.7419382929328081706.stgit@devnote3
2022-12-27x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNKMasami Hiramatsu (Google)
Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping speculative execution after RET instruction, kprobes always failes to check the probed instruction boundary by decoding the function body if the probed address is after such sequence. (Note that some conditional code blocks will be placed after function return, if compiler decides it is not on the hot path.) This is because kprobes expects kgdb puts the INT3 as a software breakpoint and it will replace the original instruction. But these INT3 are not such purpose, it doesn't need to recover the original instruction. To avoid this issue, kprobes checks whether the INT3 is owned by kgdb or not, and if so, stop decoding and make it fail. The other INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be treated as a one-byte instruction. Fixes: e463a09af2f0 ("x86: Add straight-line-speculation mitigation") Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/167146051026.1374301.392728975473572291.stgit@devnote3
2022-12-27x86/calldepth: Fix incorrect init section referencesArnd Bergmann
The addition of callthunks_translate_call_dest means that skip_addr() and patch_dest() can no longer be discarded as part of the __init section freeing: WARNING: modpost: vmlinux.o: section mismatch in reference: callthunks_translate_call_dest.cold (section: .text.unlikely) -> skip_addr (section: .init.text) WARNING: modpost: vmlinux.o: section mismatch in reference: callthunks_translate_call_dest.cold (section: .text.unlikely) -> patch_dest (section: .init.text) WARNING: modpost: vmlinux.o: section mismatch in reference: is_callthunk.cold (section: .text.unlikely) -> skip_addr (section: .init.text) ERROR: modpost: Section mismatches detected. Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them. Fixes: b2e9dfe54be4 ("x86/bpf: Emit call depth accounting if required") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221215164334.968863-1-arnd@kernel.org
2022-12-27perf/x86/amd: fix potential integer overflow on shift of a intColin Ian King
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit arithmetic and then passed as a 64 bit function argument. In the case where i is 32 or more this can lead to an overflow. Avoid this by shifting using the BIT_ULL macro instead. Fixes: 471af006a747 ("perf/x86/amd: Constrain Large Increment per Cycle events") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Ian Rogers <irogers@google.com> Acked-by: Kim Phillips <kim.phillips@amd.com> Link: https://lore.kernel.org/r/20221202135149.1797974-1-colin.i.king@gmail.com
2022-12-27KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapiDavid Woodhouse
These are (uint64_t)-1 magic values are a userspace ABI, allowing the shared info pages and other enlightenments to be disabled. This isn't a Xen ABI because Xen doesn't let the guest turn these off except with the full SHUTDOWN_soft_reset mechanism. Under KVM, the userspace VMM is expected to handle soft reset, and tear down the kernel parts of the enlightenments accordingly. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20221226120320.1125390-5-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: x86/xen: Simplify eventfd IOCTLsMichal Luczaj
Port number is validated in kvm_xen_setattr_evtchn(). Remove superfluous checks in kvm_xen_eventfd_assign() and kvm_xen_eventfd_update(). Signed-off-by: Michal Luczaj <mhal@rbox.co> Message-Id: <20221222203021.1944101-3-mhal@rbox.co> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20221226120320.1125390-4-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: x86/xen: Fix SRCU/RCU usage in readers of evtchn_portsPaolo Bonzini
The evtchnfd structure itself must be protected by either kvm->lock or SRCU. Use the former in kvm_xen_eventfd_update(), since the lock is being taken anyway; kvm_xen_hcall_evtchn_send() instead is a reader and does not need kvm->lock, and is called in SRCU critical section from the kvm_x86_handle_exit function. It is also important to use rcu_read_{lock,unlock}() in kvm_xen_hcall_evtchn_send(), because idr_remove() will *not* use synchronize_srcu() to wait for readers to complete. Remove a superfluous if (kvm) check before calling synchronize_srcu() in kvm_xen_eventfd_deassign() where kvm has been dereferenced already. Co-developed-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20221226120320.1125390-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badlyDavid Woodhouse
In particular, we shouldn't assume that being contiguous in guest virtual address space means being contiguous in guest *physical* address space. In dropping the manual calls to kvm_mmu_gva_to_gpa_system(), also drop the srcu_read_lock() that was around them. All call sites are reached from kvm_xen_hypercall() which is called from the handle_exit function with the read lock already held. 536395260 ("KVM: x86/xen: handle PV timers oneshot mode") 1a65105a5 ("KVM: x86/xen: handle PV spinlocks slowpath") Fixes: 2fd6df2f2 ("KVM: x86/xen: intercept EVTCHNOP_send from guests") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20221226120320.1125390-2-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: x86/xen: Fix memory leak in kvm_xen_write_hypercall_page()Michal Luczaj
Release page irrespectively of kvm_vcpu_write_guest() return value. Suggested-by: Paul Durrant <paul@xen.org> Fixes: 23200b7a30de ("KVM: x86/xen: intercept xen hypercalls if enabled") Signed-off-by: Michal Luczaj <mhal@rbox.co> Message-Id: <20221220151454.712165-1-mhal@rbox.co> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20221226120320.1125390-1-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27kvm: x86/mmu: Remove duplicated "be split" in spte.hLai Jiangshan
"be split be split" -> "be split" Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com> Message-Id: <20221207120505.9175-1-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-25treewide: Convert del_timer*() to timer_shutdown*()Steven Rostedt (Google)
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-23Merge tag 'mips_6.2_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: "Fixes due to DT changes" * tag 'mips_6.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: dts: bcm63268: Add missing properties to the TWD node MIPS: ralink: mt7621: avoid to init common ralink reset controller
2022-12-23KVM: x86/mmu: Don't install TDP MMU SPTE if SP has unexpected levelSean Christopherson
Don't install a leaf TDP MMU SPTE if the parent page's level doesn't match the target level of the fault, and instead have the vCPU retry the faulting instruction after warning. Continuing on is completely unnecessary as the absolute worst case scenario of retrying is DoSing the vCPU, whereas continuing on all but guarantees bigger explosions, e.g. ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/mmu/tdp_mmu.c:559! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 1025 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ #64 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__handle_changed_spte.cold+0x95/0x9c RSP: 0018:ffffc9000072faf8 EFLAGS: 00010246 RAX: 00000000000000c1 RBX: ffffc90000731000 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: ffff888277c5b4c8 RBP: 0600000112400bf3 R08: ffff888277c5b4c0 R09: ffffc9000072f9a0 R10: 0000000000000001 R11: 0000000000000001 R12: 06000001126009f3 R13: 0000000000000002 R14: 0000000012600901 R15: 0000000012400b01 FS: 00007fba9f853740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010aa7a003 CR4: 0000000000172ea0 Call Trace: <TASK> kvm_tdp_mmu_map+0x3b0/0x510 kvm_tdp_page_fault+0x10c/0x130 kvm_mmu_page_fault+0x103/0x680 vmx_handle_exit+0x132/0x5a0 [kvm_intel] vcpu_enter_guest+0x60c/0x16f0 kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> Modules linked in: kvm_intel ---[ end trace 0000000000000000 ]--- Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221213033030.83345-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-23KVM: x86/mmu: Re-check under lock that TDP MMU SP hugepage is disallowedSean Christopherson
Re-check sp->nx_huge_page_disallowed under the tdp_mmu_pages_lock spinlock when adding a new shadow page in the TDP MMU. To ensure the NX reclaim kthread can't see a not-yet-linked shadow page, the page fault path links the new page table prior to adding the page to possible_nx_huge_pages. If the page is zapped by different task, e.g. because dirty logging is disabled, between linking the page and adding it to the list, KVM can end up triggering use-after-free by adding the zapped SP to the aforementioned list, as the zapped SP's memory is scheduled for removal via RCU callback. The bug is detected by the sanity checks guarded by CONFIG_DEBUG_LIST=y, i.e. the below splat is just one possible signature. ------------[ cut here ]------------ list_add corruption. prev->next should be next (ffffc9000071fa70), but was ffff88811125ee38. (prev=ffff88811125ee38). WARNING: CPU: 1 PID: 953 at lib/list_debug.c:30 __list_add_valid+0x79/0xa0 Modules linked in: kvm_intel CPU: 1 PID: 953 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ #71 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__list_add_valid+0x79/0xa0 RSP: 0018:ffffc900006efb68 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff888116cae8a0 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 0000000100001872 RDI: ffff888277c5b4c8 RBP: ffffc90000717000 R08: ffff888277c5b4c0 R09: ffffc900006efa08 R10: 0000000000199998 R11: 0000000000199a20 R12: ffff888116cae930 R13: ffff88811125ee38 R14: ffffc9000071fa70 R15: ffff88810b794f90 FS: 00007fc0415d2740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000115201006 CR4: 0000000000172ea0 Call Trace: <TASK> track_possible_nx_huge_page+0x53/0x80 kvm_tdp_mmu_map+0x242/0x2c0 kvm_tdp_page_fault+0x10c/0x130 kvm_mmu_page_fault+0x103/0x680 vmx_handle_exit+0x132/0x5a0 [kvm_intel] vcpu_enter_guest+0x60c/0x16f0 kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> ---[ end trace 0000000000000000 ]--- Fixes: 61f94478547b ("KVM: x86/mmu: Set disallowed_nx_huge_page in TDP MMU before setting SPTE") Reported-by: Greg Thelen <gthelen@google.com> Analyzed-by: David Matlack <dmatlack@google.com> Cc: David Matlack <dmatlack@google.com> Cc: Ben Gardon <bgardon@google.com> Cc: Mingwei Zhang <mizhang@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221213033030.83345-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-23KVM: x86/mmu: Map TDP MMU leaf SPTE iff target level is reachedSean Christopherson
Map the leaf SPTE when handling a TDP MMU page fault if and only if the target level is reached. A recent commit reworked the retry logic and incorrectly assumed that walking SPTEs would never "fail", as the loop either bails (retries) or installs parent SPs. However, the iterator itself will bail early if it detects a frozen (REMOVED) SPTE when stepping down. The TDP iterator also rereads the current SPTE before stepping down specifically to avoid walking into a part of the tree that is being removed, which means it's possible to terminate the loop without the guts of the loop observing the frozen SPTE, e.g. if a different task zaps a parent SPTE between the initial read and try_step_down()'s refresh. Mapping a leaf SPTE at the wrong level results in all kinds of badness as page table walkers interpret the SPTE as a page table, not a leaf, and walk into the weeds. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1025 at arch/x86/kvm/mmu/tdp_mmu.c:1070 kvm_tdp_mmu_map+0x481/0x510 Modules linked in: kvm_intel CPU: 1 PID: 1025 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ #64 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_tdp_mmu_map+0x481/0x510 RSP: 0018:ffffc9000072fba8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffffc9000072fcc0 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff888277c5b4c8 RBP: ffff888107d45a10 R08: ffff888277c5b4c0 R09: ffffc9000072fa48 R10: 0000000000000001 R11: 0000000000000001 R12: ffffc9000073a0e0 R13: ffff88810fc54800 R14: ffff888107d1ae60 R15: ffff88810fc54f90 FS: 00007fba9f853740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010aa7a003 CR4: 0000000000172ea0 Call Trace: <TASK> kvm_tdp_page_fault+0x10c/0x130 kvm_mmu_page_fault+0x103/0x680 vmx_handle_exit+0x132/0x5a0 [kvm_intel] vcpu_enter_guest+0x60c/0x16f0 kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> ---[ end trace 0000000000000000 ]--- Invalid SPTE change: cannot replace a present leaf SPTE with another present leaf SPTE mapping a different PFN! as_id: 0 gfn: 100200 old_spte: 600000112400bf3 new_spte: 6000001126009f3 level: 2 ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/mmu/tdp_mmu.c:559! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 1025 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ #64 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__handle_changed_spte.cold+0x95/0x9c RSP: 0018:ffffc9000072faf8 EFLAGS: 00010246 RAX: 00000000000000c1 RBX: ffffc90000731000 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: ffff888277c5b4c8 RBP: 0600000112400bf3 R08: ffff888277c5b4c0 R09: ffffc9000072f9a0 R10: 0000000000000001 R11: 0000000000000001 R12: 06000001126009f3 R13: 0000000000000002 R14: 0000000012600901 R15: 0000000012400b01 FS: 00007fba9f853740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010aa7a003 CR4: 0000000000172ea0 Call Trace: <TASK> kvm_tdp_mmu_map+0x3b0/0x510 kvm_tdp_page_fault+0x10c/0x130 kvm_mmu_page_fault+0x103/0x680 vmx_handle_exit+0x132/0x5a0 [kvm_intel] vcpu_enter_guest+0x60c/0x16f0 kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> Modules linked in: kvm_intel ---[ end trace 0000000000000000 ]--- Fixes: 63d28a25e04c ("KVM: x86/mmu: simplify kvm_tdp_mmu_map flow when guest has to retry") Cc: Robert Hoo <robert.hu@linux.intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221213033030.83345-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-23KVM: x86/mmu: Don't attempt to map leaf if target TDP MMU SPTE is frozenSean Christopherson
Hoist the is_removed_spte() check above the "level == goal_level" check when walking SPTEs during a TDP MMU page fault to avoid attempting to map a leaf entry if said entry is frozen by a different task/vCPU. ------------[ cut here ]------------ WARNING: CPU: 3 PID: 939 at arch/x86/kvm/mmu/tdp_mmu.c:653 kvm_tdp_mmu_map+0x269/0x4b0 Modules linked in: kvm_intel CPU: 3 PID: 939 Comm: nx_huge_pages_t Not tainted 6.1.0-rc4+ #67 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_tdp_mmu_map+0x269/0x4b0 RSP: 0018:ffffc9000068fba8 EFLAGS: 00010246 RAX: 00000000000005a0 RBX: ffffc9000068fcc0 RCX: 0000000000000005 RDX: ffff88810741f000 RSI: ffff888107f04600 RDI: ffffc900006a3000 RBP: 060000010b000bf3 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 000ffffffffff000 R12: 0000000000000005 R13: ffff888113670000 R14: ffff888107464958 R15: 0000000000000000 FS: 00007f01c942c740(0000) GS:ffff888277cc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000117013006 CR4: 0000000000172ea0 Call Trace: <TASK> kvm_tdp_page_fault+0x10c/0x130 kvm_mmu_page_fault+0x103/0x680 vmx_handle_exit+0x132/0x5a0 [kvm_intel] vcpu_enter_guest+0x60c/0x16f0 kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> ---[ end trace 0000000000000000 ]--- Fixes: 63d28a25e04c ("KVM: x86/mmu: simplify kvm_tdp_mmu_map flow when guest has to retry") Cc: Robert Hoo <robert.hu@linux.intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Robert Hoo <robert.hu@linux.intel.com> Message-Id: <20221213033030.83345-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-23KVM: nVMX: Don't stuff secondary execution control if it's not supportedSean Christopherson
When stuffing the allowed secondary execution controls for nested VMX in response to CPUID updates, don't set the allowed-1 bit for a feature that isn't supported by KVM, i.e. isn't allowed by the canonical vmcs_config. WARN if KVM attempts to manipulate a feature that isn't supported. All features that are currently stuffed are always advertised to L1 for nested VMX if they are supported in KVM's base configuration, and no additional features should ever be added to the CPUID-induced stuffing (updating VMX MSRs in response to CPUID updates is a long-standing KVM flaw that is slowly being fixed). Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221213062306.667649-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-23KVM: nVMX: Properly expose ENABLE_USR_WAIT_PAUSE control to L1Sean Christopherson
Set ENABLE_USR_WAIT_PAUSE in KVM's supported VMX MSR configuration if the feature is supported in hardware and enabled in KVM's base, non-nested configuration, i.e. expose ENABLE_USR_WAIT_PAUSE to L1 if it's supported. This fixes a bug where saving/restoring, i.e. migrating, a vCPU will fail if WAITPKG (the associated CPUID feature) is enabled for the vCPU, and obviously allows L1 to enable the feature for L2. KVM already effectively exposes ENABLE_USR_WAIT_PAUSE to L1 by stuffing the allowed-1 control ina vCPU's virtual MSR_IA32_VMX_PROCBASED_CTLS2 when updating secondary controls in response to KVM_SET_CPUID(2), but (a) that depends on flawed code (KVM shouldn't touch VMX MSRs in response to CPUID updates) and (b) runs afoul of vmx_restore_control_msr()'s restriction that the guest value must be a strict subset of the supported host value. Although no past commit explicitly enabled nested support for WAITPKG, doing so is safe and functionally correct from an architectural perspective as no additional KVM support is needed to virtualize TPAUSE, UMONITOR, and UMWAIT for L2 relative to L1, and KVM already forwards VM-Exits to L1 as necessary (commit bf653b78f960, "KVM: vmx: Introduce handle_unexpected_vmexit and handle WAITPKG vmexit"). Note, KVM always keeps the hosts MSR_IA32_UMWAIT_CONTROL resident in hardware, i.e. always runs both L1 and L2 with the host's power management settings for TPAUSE and UMWAIT. See commit bf09fb6cba4f ("KVM: VMX: Stop context switching MSR_IA32_UMWAIT_CONTROL") for more details. Fixes: e69e72faa3a0 ("KVM: x86: Add support for user wait instructions") Cc: stable@vger.kernel.org Reported-by: Aaron Lewis <aaronlewis@google.com> Reported-by: Yu Zhang <yu.c.zhang@linux.intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <20221213062306.667649-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-23KVM: nVMX: Document that ignoring memory failures for VMCLEAR is deliberateSean Christopherson
Explicitly drop the result of kvm_vcpu_write_guest() when writing the "launch state" as part of VMCLEAR emulation, and add a comment to call out that KVM's behavior is architecturally valid. Intel's pseudocode effectively says that VMCLEAR is a nop if the target VMCS address isn't in memory, e.g. if the address points at MMIO. Add a FIXME to call out that suppressing failures on __copy_to_user() is wrong, as memory (a memslot) does exist in that case. Punt the issue to the future as open coding kvm_vcpu_write_guest() just to make sure the guest dies with -EFAULT isn't worth the extra complexity. The flaw will need to be addressed if KVM ever does something intelligent on uaccess failures, e.g. to support post-copy demand paging, but in that case KVM will need a more thorough overhaul, i.e. VMCLEAR shouldn't need to open code a core KVM helper. No functional change intended. Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1527765 ("Error handling issues") Fixes: 587d7e72aedc ("kvm: nVMX: VMCLEAR should not cause the vCPU to shut down") Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221220154224.526568-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-23KVM: x86: Sanity check inputs to kvm_handle_memory_failure()Sean Christopherson
Add a sanity check in kvm_handle_memory_failure() to assert that a valid x86_exception structure is provided if the memory "failure" wants to propagate a fault into the guest. If a memory failure happens during a direct guest physical memory access, e.g. for nested VMX, KVM hardcodes the failure to X86EMUL_IO_NEEDED and doesn't provide an exception pointer (because the exception struct would just be filled with garbage). Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221220153427.514032-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-23KVM: x86: Simplify kvm_apic_hw_enabledPeng Hao
kvm_apic_hw_enabled() only needs to return bool, there is no place to use the return value of MSR_IA32_APICBASE_ENABLE. Signed-off-by: Peng Hao <flyingpeng@tencent.com> Message-Id: <CAPm50aJ=BLXNWT11+j36Dd6d7nz2JmOBk4u7o_NPQ0N61ODu1g@mail.gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-23KVM: x86: hyper-v: Fix 'using uninitialized value' Coverity warningVitaly Kuznetsov
In kvm_hv_flush_tlb(), 'data_offset' and 'consumed_xmm_halves' variables are used in a mutually exclusive way: in 'hc->fast' we count in 'XMM halves' and increase 'data_offset' otherwise. Coverity discovered, that in one case both variables are incremented unconditionally. This doesn't seem to cause any issues as the only user of 'data_offset'/'consumed_xmm_halves' data is kvm_hv_get_tlb_flush_entries() -> kvm_hv_get_hc_data() which also takes into account 'hc->fast' but is still worth fixing. To make things explicit, put 'data_offset' and 'consumed_xmm_halves' to 'struct kvm_hv_hcall' as a union and use at call sites. This allows to remove explicit 'data_offset'/'consumed_xmm_halves' parameters from kvm_hv_get_hc_data()/kvm_get_sparse_vp_set()/kvm_hv_get_tlb_flush_entries() helpers. Note: 'struct kvm_hv_hcall' is allocated on stack in kvm_hv_hypercall() and is not zeroed, consumers are supposed to initialize the appropriate field if needed. Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1527764 ("Uninitialized variables") Fixes: 260970862c88 ("KVM: x86: hyper-v: Handle HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls gently") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221208102700.959630-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-23KVM: x86: ioapic: Fix level-triggered EOI and userspace I/OAPIC reconfigure raceAdamos Ttofari
When scanning userspace I/OAPIC entries, intercept EOI for level-triggered IRQs if the current vCPU has a pending and/or in-service IRQ for the vector in its local API, even if the vCPU doesn't match the new entry's destination. This fixes a race between userspace I/OAPIC reconfiguration and IRQ delivery that results in the vector's bit being left set in the remote IRR due to the eventual EOI not being forwarded to the userspace I/OAPIC. Commit 0fc5a36dd6b3 ("KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race") fixed the in-kernel IOAPIC, but not the userspace IOAPIC configuration, which has a similar race. Fixes: 0fc5a36dd6b3 ("KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race") Signed-off-by: Adamos Ttofari <attofari@amazon.de> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221208094415.12723-1-attofari@amazon.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-23KVM: x86/pmu: Prevent zero period event from being repeatedly releasedLike Xu
The current vPMU can reuse the same pmc->perf_event for the same hardware event via pmc_pause/resume_counter(), but this optimization does not apply to a portion of the TSX events (e.g., "event=0x3c,in_tx=1, in_tx_cp=1"), where event->attr.sample_period is legally zero at creation, thus making the perf call to perf_event_period() meaningless (no need to adjust sample period in this case), and instead causing such reusable perf_events to be repeatedly released and created. Avoid releasing zero sample_period events by checking is_sampling_event() to follow the previously enable/disable optimization. Signed-off-by: Like Xu <likexu@tencent.com> Message-Id: <20221207071506.15733-2-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull RISC-V kvm updates from Paolo Bonzini: - Allow unloading KVM module - Allow KVM user-space to set mvendorid, marchid, and mimpid - Several fixes and cleanups * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: RISC-V: KVM: Add ONE_REG interface for mvendorid, marchid, and mimpid RISC-V: KVM: Save mvendorid, marchid, and mimpid when creating VCPU RISC-V: Export sbi_get_mvendorid() and friends RISC-V: KVM: Move sbi related struct and functions to kvm_vcpu_sbi.h RISC-V: KVM: Use switch-case in kvm_riscv_vcpu_set/get_reg() RISC-V: KVM: Remove redundant includes of asm/csr.h RISC-V: KVM: Remove redundant includes of asm/kvm_vcpu_timer.h RISC-V: KVM: Fix reg_val check in kvm_riscv_vcpu_set_reg_config() RISC-V: KVM: Simplify kvm_arch_prepare_memory_region() RISC-V: KVM: Exit run-loop immediately if xfer_to_guest fails RISC-V: KVM: use vma_lookup() instead of find_vma_intersection() RISC-V: KVM: Add exit logic to main.c
2022-12-21Merge tag 'rproc-v6.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "rproc-virtio device names are now auto generated, to avoid conflicts between remoteproc instances. The imx_rproc driver is extended with support for communicating with and attaching to a running M4 on i.MX8QXP, as well as support for attaching to the M4 after self-recovering from a crash. Support is added for i.MX8QM and mailbox channels are reconnected during the recovery process, in order to avoid data corruption. The Xilinx Zynqmp firmware interface is extended and support for the Xilinx R5 RPU is introduced. Various resources leaks, primarily in error paths, throughout the Qualcomm drivers are corrected. Lastly a fix to ensure that pm_relax is invoked even if the remoteproc instance is stopped between a crash is being reported and the recovery handler is scheduled" * tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits) remoteproc: core: Do pm_relax when in RPROC_OFFLINE state remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on() remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region() remoteproc: qcom_q6v5_pas: detach power domains on remove remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio() remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev() remoteproc: sysmon: Make QMI message rules const drivers: remoteproc: Add Xilinx r5 remoteproc driver firmware: xilinx: Add RPU configuration APIs firmware: xilinx: Add shutdown/wakeup APIs firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration. arm64: dts: xilinx: zynqmp: Add RPU subsystem device node dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings remoteproc: core: Use device_match_of_node() remoteproc: imx_rproc: Correct i.MX93 DRAM mapping remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP remoteproc: imx_rproc: Request mbox channel later remoteproc: imx_rproc: Support i.MX8QM remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP ...
2022-12-21m68k: remove broken strcmp implementationLinus Torvalds
The m68 hand-written assembler version of strcmp() has always been broken: it returns the difference between the first non-matching byte done as a 8-bit subtraction. That is _almost_ right, but is broken for the overflow case. The strcmp() function should indeed return the sign of the difference between the first byte that differs, but the subtraction needs to be done in a wider type than 'char'. Otherwise the ordering isn't actually stable. This went unnoticed for basically forever, because nobody ever cares about non-US-ASCII orderings in the kernel (in fact, most users only care about "exact match or not"), so overflows don't really happen in practice, even if it was very very wrong. But that mostly unnoticeable bug becomes very noticeable by the recent change to make 'char' be unsigned in the kernel across all architectures (commit 3bc753c06dd0: "kbuild: treat char as always unsigned"). Because the code not only did the subtraction in the wrong type width, it also used 'char' to then make the compiler expand the result from an 8-bit difference to the 'int' return value. So now with an unsigned char that incorrect arithmetic width was then not even sign-expanded, and always returned just a positive integer. We could re-instate the old broken code by just turning the 'char' into 'signed char' as has been done elsewhere where people depended on the signedness of 'char', but since the whole function was broken to begin with, and we have a non-broken default fallback implementation, let's just remove this broken function entirely. Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/lkml/20221221145332.GA2399037@roeck-us.net/ Cc: Jason Donenfeld <Jason@zx2c4.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-21Merge tag 'random-6.2-rc1-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull more random number generator updates from Jason Donenfeld: "Two remaining changes that are now possible after you merged a few other trees: - #include <asm/archrandom.h> can be removed from random.h now, making the direct use of the arch_random_* API more of a private implementation detail between the archs and random.c, rather than something for general consumers. - Two additional uses of prandom_u32_max() snuck in during the initial phase of pulls, so these have been converted to get_random_u32_below(), and now the deprecated prandom_u32_max() alias -- which was just a wrapper around get_random_u32_below() -- can be removed. In addition, there is one fix: - Check efi_rt_services_supported() before attempting to use an EFI runtime function. This affected EFI systems that disable runtime services yet still boot via EFI (e.g. the reporter's Lenovo Thinkpad X13s laptop), as well systems where EFI runtime services have been forcibly disabled, such as on PREEMPT_RT. On those machines, a very early and hard to diagnose crash would happen, preventing boot" * tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove prandom_u32_max() efi: random: fix NULL-deref when refreshing seed random: do not include <asm/archrandom.h> from random.h
2022-12-21MIPS: dts: bcm63268: Add missing properties to the TWD nodeFlorian Fainelli
We currently have a DTC warning with the current DTS due to the lack of a suitable #address-cells and #size-cells property: DTC arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dtb arch/mips/boot/dts/brcm/bcm63268.dtsi:115.5-22: Warning (reg_format): /ubus/timer-mfd@10000080/timer@0:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) arch/mips/boot/dts/brcm/bcm63268.dtsi:120.5-22: Warning (reg_format): /ubus/timer-mfd@10000080/watchdog@1c:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) arch/mips/boot/dts/brcm/bcm63268.dtsi:111.4-35: Warning (ranges_format): /ubus/timer-mfd@10000080:ranges: "ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1) Fixes: d3db4b96ab7f ("mips: dts: bcm63268: add TWD block timer") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-12-21MIPS: ralink: mt7621: avoid to init common ralink reset controllerSergio Paracuellos
Commit 38a8553b0a22 ("clk: ralink: make system controller node a reset provider") make system controller a reset provider for mt7621 ralink SoCs. Ralink init code also tries to start previous common reset controller which at the end tries to find device tree node 'ralink,rt2880-reset'. mt7621 device tree file is not using at all this node anymore. Hence avoid to init this common reset controller for mt7621 ralink SoCs to avoid 'Failed to find reset controller node' boot error trace error. Fixes: 64b2d6ffff86 ("staging: mt7621-dts: align resets with binding documentation") Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-12-20Merge tag 'm68knommu-for-v6.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu update from Greg Ungerer: "Only a single change to use the safer strscpy() instead of strncpy() when setting up the cmdline" * tag 'm68knommu-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: use strscpy() to instead of strncpy()
2022-12-20Merge tag 'parisc-for-6.2-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "There is one noteable patch, which allows the parisc kernel to use the same MADV_xxx constants as the other architectures going forward. With that change only alpha has one entry left (MADV_DONTNEED is 6 vs 4 on others) which is different. To prevent an ABI breakage, a wrapper is included which translates old MADV values to the new ones, so existing userspace isn't affected. Reason for that patch is, that some applications wrongly used the standard MADV_xxx values even on some non-x86 platforms and as such those programs failed to run correctly on parisc (examples are qemu-user, tor browser and boringssl). Then the kgdb console and the LED code received some fixes, and some 0-day warnings are now gone. Finally, the very last compile warning which was visible during a kernel build is now fixed too (in the vDSO code). The majority of the patches are tagged for stable series and in summary this patchset is quite small and drops more code than it adds: Fixes: - Fix potential null-ptr-deref in start_task() - Fix kgdb console on serial port - Add missing FORCE prerequisites in Makefile - Drop PMD_SHIFT from calculation in pgtable.h Enhancements: - Implement a wrapper to align madvise() MADV_* constants with other architectures - If machine supports running MPE/XL, show the MPE model string Cleanups: - Drop duplicate kgdb console code - Indenting fixes in setup_cmdline()" * tag 'parisc-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Show MPE/iX model string at bootup parisc: Add missing FORCE prerequisites in Makefile parisc: Move pdc_result struct to firmware.c parisc: Drop locking in pdc console code parisc: Drop duplicate kgdb_pdc console parisc: Fix locking in pdc_iodc_print() firmware call parisc: Drop PMD_SHIFT from calculation in pgtable.h parisc: Align parisc MADV_XXX constants with all other architectures parisc: led: Fix potential null-ptr-deref in start_task() parisc: Fix inconsistent indenting in setup_cmdline()
2022-12-20prandom: remove prandom_u32_max()Jason A. Donenfeld
Convert the final two users of prandom_u32_max() that slipped in during 6.2-rc1 to use get_random_u32_below(). Then, with no more users left, we can finally remove the deprecated function. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-12-20random: do not include <asm/archrandom.h> from random.hJason A. Donenfeld
The <asm/archrandom.h> header is a random.c private detail, not something to be called by other code. As such, don't make it automatically available by way of random.h. Cc: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-12-19Merge tag 'soc-fixes-6.2-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are a couple of build fixes from randconfig testing, plus a set of Mediatek SoC specific fixes, all trivial" * tag 'soc-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: soc: tegra: fix CPU_BIG_ENDIAN dependencies ARM: disallow pre-ARMv5 builds with ld.lld ARM: pxa: fix building with clang MAINTAINERS: add related dts to IXP4xx ARM: dts: spear: drop 0x from unit address arm64: dts: mt8183: Fix Mali GPU clock arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon soc: mediatek: pm-domains: Fix the power glitch issue
2022-12-19Merge tag 'kbuild-v6.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Support zstd-compressed debug info - Allow W=1 builds to detect objects shared among multiple modules - Add srcrpm-pkg target to generate a source RPM package - Make the -s option detection work for future GNU Make versions - Add -Werror to KBUILD_CPPFLAGS when CONFIG_WERROR=y - Allow W=1 builds to detect -Wundef warnings in any preprocessed files - Raise the minimum supported version of binutils to 2.25 - Use $(intcmp ...) to compare integers if GNU Make >= 4.4 is used - Use $(file ...) to read a file if GNU Make >= 4.2 is used - Print error if GNU Make older than 3.82 is used - Allow modpost to detect section mismatches with Clang LTO - Include vmlinuz.efi into kernel tarballs for arm64 CONFIG_EFI_ZBOOT=y * tag 'kbuild-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits) buildtar: fix tarballs with EFI_ZBOOT enabled modpost: Include '.text.*' in TEXT_SECTIONS padata: Mark padata_work_init() as __ref kbuild: ensure Make >= 3.82 is used kbuild: refactor the prerequisites of the modpost rule kbuild: change module.order to list *.o instead of *.ko kbuild: use .NOTINTERMEDIATE for future GNU Make versions kconfig: refactor Makefile to reduce process forks kbuild: add read-file macro kbuild: do not sort after reading modules.order kbuild: add test-{ge,gt,le,lt} macros Documentation: raise minimum supported version of binutils to 2.25 kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds kbuild: move -Werror from KBUILD_CFLAGS to KBUILD_CPPFLAGS kbuild: Port silent mode detection to future gnu make. init/version.c: remove #include <generated/utsrelease.h> firmware_loader: remove #include <generated/utsrelease.h> modpost: Mark uuid_le type to be suitable only for MEI kbuild: add ability to make source rpm buildable using koji kbuild: warn objects shared among multiple modules ...
2022-12-19Merge tag 'v6.1-dts64-fixes' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/fixes MT8183: fix phandle for GPU clock MT8195 demo: fix size of secmon reserved memory area * tag 'v6.1-dts64-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt8183: Fix Mali GPU clock arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon Link: https://lore.kernel.org/r/af4c45ce-a150-438f-dab4-e47b120c32c4@suse.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-12-19ARM: disallow pre-ARMv5 builds with ld.lldArnd Bergmann
lld cannot build for ARMv4/v4T targets because it inserts 'blx' instructions that are unsupported there: ld.lld: warning: lld uses blx instruction, no object with architecture supporting feature detected Add a Kconfig time dependency to prevent those targets from being selected in randconfig builds. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://github.com/llvm/llvm-project/issues/50764 Link: https://github.com/ClangBuiltLinux/linux/issues/964 Link: https://lore.kernel.org/r/20221215162635.3750763-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-12-19ARM: pxa: fix building with clangArnd Bergmann
The integrated assembler in clang does not understand the xscale specific mra/mar instructions: arch/arm/mach-pxa/pxa27x.c:136:15: error: unsupported architectural extension: xscale asm volatile(".arch_extension xscale\n\t" arch/arm/mach-pxa/pxa27x.c:136:40: error: invalid instruction, did you mean: mcr, mla, mrc, mrs, msr? mra r2, r3, acc0 Since these are coprocessor features, the same can be expressed using mrrc/mcrr, so use that for builds with IAS. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20221215162529.3659187-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit (git 2.34.1) at 2025-05-28 19:20:13 +0000