aboutsummaryrefslogtreecommitdiff
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/amba/serial.h28
-rw-r--r--include/linux/serdev.h29
-rw-r--r--include/linux/tty.h19
-rw-r--r--include/linux/tty_driver.h9
-rw-r--r--include/linux/tty_port.h8
-rw-r--r--include/linux/virtio_console.h38
6 files changed, 50 insertions, 81 deletions
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index a1307b58cc2c..27003ec52114 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -75,10 +75,10 @@
#define UART011_DR_PE (1 << 9)
#define UART011_DR_FE (1 << 8)
-#define UART01x_RSR_OE 0x08
-#define UART01x_RSR_BE 0x04
-#define UART01x_RSR_PE 0x02
-#define UART01x_RSR_FE 0x01
+#define UART01x_RSR_OE 0x08
+#define UART01x_RSR_BE 0x04
+#define UART01x_RSR_PE 0x02
+#define UART01x_RSR_FE 0x01
#define UART011_FR_RI 0x100
#define UART011_FR_TXFE 0x080
@@ -86,9 +86,9 @@
#define UART01x_FR_TXFF 0x020
#define UART01x_FR_RXFE 0x010
#define UART01x_FR_BUSY 0x008
-#define UART01x_FR_DCD 0x004
-#define UART01x_FR_DSR 0x002
-#define UART01x_FR_CTS 0x001
+#define UART01x_FR_DCD 0x004
+#define UART01x_FR_DSR 0x002
+#define UART01x_FR_CTS 0x001
#define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY)
/*
@@ -110,14 +110,14 @@
#define UART011_CR_TXE 0x0100 /* transmit enable */
#define UART011_CR_LBE 0x0080 /* loopback enable */
#define UART010_CR_RTIE 0x0040
-#define UART010_CR_TIE 0x0020
-#define UART010_CR_RIE 0x0010
+#define UART010_CR_TIE 0x0020
+#define UART010_CR_RIE 0x0010
#define UART010_CR_MSIE 0x0008
#define ST_UART011_CR_OVSFACT 0x0008 /* Oversampling factor */
#define UART01x_CR_IIRLP 0x0004 /* SIR low power mode */
#define UART01x_CR_SIREN 0x0002 /* SIR enable */
#define UART01x_CR_UARTEN 0x0001 /* UART enable */
-
+
#define UART011_LCRH_SPS 0x80
#define UART01x_LCRH_WLEN_8 0x60
#define UART01x_LCRH_WLEN_7 0x40
@@ -203,8 +203,8 @@
#define UART011_TXDMAE (1 << 1) /* enable transmit dma */
#define UART011_RXDMAE (1 << 0) /* enable receive dma */
-#define UART01x_RSR_ANY (UART01x_RSR_OE|UART01x_RSR_BE|UART01x_RSR_PE|UART01x_RSR_FE)
-#define UART01x_FR_MODEM_ANY (UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS)
+#define UART01x_RSR_ANY (UART01x_RSR_OE | UART01x_RSR_BE | UART01x_RSR_PE | UART01x_RSR_FE)
+#define UART01x_FR_MODEM_ANY (UART01x_FR_DCD | UART01x_FR_DSR | UART01x_FR_CTS)
#ifndef __ASSEMBLY__
struct amba_device; /* in uncompress this is included but amba/bus.h is not */
@@ -220,8 +220,8 @@ struct amba_pl011_data {
bool dma_rx_poll_enable;
unsigned int dma_rx_poll_rate;
unsigned int dma_rx_poll_timeout;
- void (*init) (void);
- void (*exit) (void);
+ void (*init)(void);
+ void (*exit)(void);
};
#endif
diff --git a/include/linux/serdev.h b/include/linux/serdev.h
index f5f97fa25e8a..3fab88ba265e 100644
--- a/include/linux/serdev.h
+++ b/include/linux/serdev.h
@@ -27,7 +27,7 @@ struct serdev_device;
* not sleep.
*/
struct serdev_device_ops {
- int (*receive_buf)(struct serdev_device *, const unsigned char *, size_t);
+ ssize_t (*receive_buf)(struct serdev_device *, const u8 *, size_t);
void (*write_wakeup)(struct serdev_device *);
};
@@ -82,7 +82,7 @@ enum serdev_parity {
* serdev controller structures
*/
struct serdev_controller_ops {
- int (*write_buf)(struct serdev_controller *, const unsigned char *, size_t);
+ ssize_t (*write_buf)(struct serdev_controller *, const u8 *, size_t);
void (*write_flush)(struct serdev_controller *);
int (*write_room)(struct serdev_controller *);
int (*open)(struct serdev_controller *);
@@ -99,12 +99,14 @@ struct serdev_controller_ops {
/**
* struct serdev_controller - interface to the serdev controller
* @dev: Driver model representation of the device.
+ * @host: Serial port hardware controller device
* @nr: number identifier for this controller/bus.
* @serdev: Pointer to slave device for this controller.
* @ops: Controller operations.
*/
struct serdev_controller {
struct device dev;
+ struct device *host;
unsigned int nr;
struct serdev_device *serdev;
const struct serdev_controller_ops *ops;
@@ -167,7 +169,9 @@ struct serdev_device *serdev_device_alloc(struct serdev_controller *);
int serdev_device_add(struct serdev_device *);
void serdev_device_remove(struct serdev_device *);
-struct serdev_controller *serdev_controller_alloc(struct device *, size_t);
+struct serdev_controller *serdev_controller_alloc(struct device *host,
+ struct device *parent,
+ size_t size);
int serdev_controller_add(struct serdev_controller *);
void serdev_controller_remove(struct serdev_controller *);
@@ -181,9 +185,9 @@ static inline void serdev_controller_write_wakeup(struct serdev_controller *ctrl
serdev->ops->write_wakeup(serdev);
}
-static inline int serdev_controller_receive_buf(struct serdev_controller *ctrl,
- const unsigned char *data,
- size_t count)
+static inline ssize_t serdev_controller_receive_buf(struct serdev_controller *ctrl,
+ const u8 *data,
+ size_t count)
{
struct serdev_device *serdev = ctrl->serdev;
@@ -200,13 +204,13 @@ void serdev_device_close(struct serdev_device *);
int devm_serdev_device_open(struct device *, struct serdev_device *);
unsigned int serdev_device_set_baudrate(struct serdev_device *, unsigned int);
void serdev_device_set_flow_control(struct serdev_device *, bool);
-int serdev_device_write_buf(struct serdev_device *, const unsigned char *, size_t);
+int serdev_device_write_buf(struct serdev_device *, const u8 *, size_t);
void serdev_device_wait_until_sent(struct serdev_device *, long);
int serdev_device_get_tiocm(struct serdev_device *);
int serdev_device_set_tiocm(struct serdev_device *, int, int);
int serdev_device_break_ctl(struct serdev_device *serdev, int break_state);
void serdev_device_write_wakeup(struct serdev_device *);
-int serdev_device_write(struct serdev_device *, const unsigned char *, size_t, long);
+ssize_t serdev_device_write(struct serdev_device *, const u8 *, size_t, long);
void serdev_device_write_flush(struct serdev_device *);
int serdev_device_write_room(struct serdev_device *);
@@ -244,7 +248,7 @@ static inline unsigned int serdev_device_set_baudrate(struct serdev_device *sdev
}
static inline void serdev_device_set_flow_control(struct serdev_device *sdev, bool enable) {}
static inline int serdev_device_write_buf(struct serdev_device *serdev,
- const unsigned char *buf,
+ const u8 *buf,
size_t count)
{
return -ENODEV;
@@ -262,8 +266,9 @@ static inline int serdev_device_break_ctl(struct serdev_device *serdev, int brea
{
return -EOPNOTSUPP;
}
-static inline int serdev_device_write(struct serdev_device *sdev, const unsigned char *buf,
- size_t count, unsigned long timeout)
+static inline ssize_t serdev_device_write(struct serdev_device *sdev,
+ const u8 *buf, size_t count,
+ unsigned long timeout)
{
return -ENODEV;
}
@@ -311,11 +316,13 @@ struct tty_driver;
#ifdef CONFIG_SERIAL_DEV_CTRL_TTYPORT
struct device *serdev_tty_port_register(struct tty_port *port,
+ struct device *host,
struct device *parent,
struct tty_driver *drv, int idx);
int serdev_tty_port_unregister(struct tty_port *port);
#else
static inline struct device *serdev_tty_port_register(struct tty_port *port,
+ struct device *host,
struct device *parent,
struct tty_driver *drv, int idx)
{
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 4b6340ac2af2..cc08f7e1c122 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -242,7 +242,7 @@ struct tty_struct {
void *driver_data;
spinlock_t files_lock;
int write_cnt;
- unsigned char *write_buf;
+ u8 *write_buf;
struct list_head tty_files;
@@ -393,8 +393,10 @@ extern const struct class tty_class;
* tty_kref_get - get a tty reference
* @tty: tty device
*
- * Returns: a new reference to a tty object. The caller must hold sufficient
- * locks/counts to ensure that their existing reference cannot go away
+ * Returns: a new reference to a tty object
+ *
+ * Locking: The caller must hold sufficient locks/counts to ensure that their
+ * existing reference cannot go away.
*/
static inline struct tty_struct *tty_kref_get(struct tty_struct *tty)
{
@@ -408,8 +410,8 @@ void tty_wait_until_sent(struct tty_struct *tty, long timeout);
void stop_tty(struct tty_struct *tty);
void start_tty(struct tty_struct *tty);
void tty_write_message(struct tty_struct *tty, char *msg);
-int tty_send_xchar(struct tty_struct *tty, char ch);
-int tty_put_char(struct tty_struct *tty, unsigned char c);
+int tty_send_xchar(struct tty_struct *tty, u8 ch);
+int tty_put_char(struct tty_struct *tty, u8 c);
unsigned int tty_chars_in_buffer(struct tty_struct *tty);
unsigned int tty_write_room(struct tty_struct *tty);
void tty_driver_flush_buffer(struct tty_struct *tty);
@@ -436,12 +438,11 @@ void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud,
* tty_get_baud_rate - get tty bit rates
* @tty: tty to query
*
- * Returns: the baud rate as an integer for this terminal. The termios lock
- * must be held by the caller and the terminal bit flags may be updated.
+ * Returns: the baud rate as an integer for this terminal
*
- * Locking: none
+ * Locking: The termios lock must be held by the caller.
*/
-static inline speed_t tty_get_baud_rate(struct tty_struct *tty)
+static inline speed_t tty_get_baud_rate(const struct tty_struct *tty)
{
return tty_termios_baud_rate(&tty->termios);
}
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 18beff0cec1a..7372124fbf90 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -72,8 +72,7 @@ struct serial_struct;
* is closed for the last time freeing up the resources. This is
* actually the second part of shutdown for routines that might sleep.
*
- * @write: ``ssize_t ()(struct tty_struct *tty, const unsigned char *buf,
- * size_t count)``
+ * @write: ``ssize_t ()(struct tty_struct *tty, const u8 *buf, size_t count)``
*
* This routine is called by the kernel to write a series (@count) of
* characters (@buf) to the @tty device. The characters may come from
@@ -85,7 +84,7 @@ struct serial_struct;
*
* Optional: Required for writable devices. May not sleep.
*
- * @put_char: ``int ()(struct tty_struct *tty, unsigned char ch)``
+ * @put_char: ``int ()(struct tty_struct *tty, u8 ch)``
*
* This routine is called by the kernel to write a single character @ch to
* the @tty device. If the kernel uses this routine, it must call the
@@ -243,7 +242,7 @@ struct serial_struct;
* Optional: If not provided, the device is assumed to have no FIFO.
* Usually correct to invoke via tty_wait_until_sent(). May sleep.
*
- * @send_xchar: ``void ()(struct tty_struct *tty, char ch)``
+ * @send_xchar: ``void ()(struct tty_struct *tty, u8 ch)``
*
* This routine is used to send a high-priority XON/XOFF character (@ch)
* to the @tty device.
@@ -375,7 +374,7 @@ struct tty_operations {
void (*flush_buffer)(struct tty_struct *tty);
void (*set_ldisc)(struct tty_struct *tty);
void (*wait_until_sent)(struct tty_struct *tty, int timeout);
- void (*send_xchar)(struct tty_struct *tty, char ch);
+ void (*send_xchar)(struct tty_struct *tty, u8 ch);
int (*tiocmget)(struct tty_struct *tty);
int (*tiocmset)(struct tty_struct *tty,
unsigned int set, unsigned int clear);
diff --git a/include/linux/tty_port.h b/include/linux/tty_port.h
index 6b367eb17979..1b861f2100b6 100644
--- a/include/linux/tty_port.h
+++ b/include/linux/tty_port.h
@@ -114,8 +114,8 @@ struct tty_port {
unsigned char console:1;
struct mutex mutex;
struct mutex buf_mutex;
- unsigned char *xmit_buf;
- DECLARE_KFIFO_PTR(xmit_fifo, unsigned char);
+ u8 *xmit_buf;
+ DECLARE_KFIFO_PTR(xmit_fifo, u8);
unsigned int close_delay;
unsigned int closing_wait;
int drain_delay;
@@ -149,10 +149,10 @@ struct device *tty_port_register_device_attr(struct tty_port *port,
const struct attribute_group **attr_grp);
struct device *tty_port_register_device_serdev(struct tty_port *port,
struct tty_driver *driver, unsigned index,
- struct device *device);
+ struct device *host, struct device *parent);
struct device *tty_port_register_device_attr_serdev(struct tty_port *port,
struct tty_driver *driver, unsigned index,
- struct device *device, void *drvdata,
+ struct device *host, struct device *parent, void *drvdata,
const struct attribute_group **attr_grp);
void tty_port_unregister_device(struct tty_port *port,
struct tty_driver *driver, unsigned index);
diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h
deleted file mode 100644
index d2e2785af602..000000000000
--- a/include/linux/virtio_console.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
- * anyone can use the definitions to implement compatible drivers/servers:
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Copyright (C) Red Hat, Inc., 2009, 2010, 2011
- * Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011
- */
-#ifndef _LINUX_VIRTIO_CONSOLE_H
-#define _LINUX_VIRTIO_CONSOLE_H
-
-#include <uapi/linux/virtio_console.h>
-
-int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int));
-#endif /* _LINUX_VIRTIO_CONSOLE_H */
generated by cgit (git 2.34.1) at 2025-06-03 23:46:01 +0000