aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/phy')
-rw-r--r--drivers/usb/phy/Kconfig4
-rw-r--r--drivers/usb/phy/phy-ab8500-usb.c12
-rw-r--r--drivers/usb/phy/phy-am335x-control.c7
-rw-r--r--drivers/usb/phy/phy-fsl-usb.c166
-rw-r--r--drivers/usb/phy/phy-fsl-usb.h14
-rw-r--r--drivers/usb/phy/phy-isp1301-omap.c14
-rw-r--r--drivers/usb/phy/phy-jz4770.c284
-rw-r--r--drivers/usb/phy/phy-keystone.c2
-rw-r--r--drivers/usb/phy/phy-mv-usb.c2
-rw-r--r--drivers/usb/phy/phy-twl6030-usb.c2
-rw-r--r--drivers/usb/phy/phy.c49
11 files changed, 248 insertions, 308 deletions
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 4b3fa78995cf..ef4787cd3d37 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -185,11 +185,11 @@ config USB_ULPI_VIEWPORT
controllers with a viewport register (e.g. Chipidea/ARC controllers).
config JZ4770_PHY
- tristate "Ingenic JZ4770 Transceiver Driver"
+ tristate "Ingenic SoCs Transceiver Driver"
depends on MIPS || COMPILE_TEST
select USB_PHY
help
This driver provides PHY support for the USB controller found
- on the JZ4770 SoC from Ingenic.
+ on the JZ-series and X-series SoCs from Ingenic.
endmenu
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 20c0f082bf9c..aa4a3140394b 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -331,7 +331,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
switch (lsts) {
case USB_LINK_ACA_RID_B_8505:
event = UX500_MUSB_RIDB;
- /* Fall through */
+ fallthrough;
case USB_LINK_NOT_CONFIGURED_8505:
case USB_LINK_RESERVED0_8505:
case USB_LINK_RESERVED1_8505:
@@ -352,7 +352,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
case USB_LINK_ACA_RID_C_NM_8505:
event = UX500_MUSB_RIDC;
- /* Fall through */
+ fallthrough;
case USB_LINK_STD_HOST_NC_8505:
case USB_LINK_STD_HOST_C_NS_8505:
case USB_LINK_STD_HOST_C_S_8505:
@@ -371,7 +371,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
case USB_LINK_ACA_RID_A_8505:
case USB_LINK_ACA_DOCK_CHGR_8505:
event = UX500_MUSB_RIDA;
- /* Fall through */
+ fallthrough;
case USB_LINK_HM_IDGND_8505:
if (ab->mode == USB_IDLE) {
ab->mode = USB_HOST;
@@ -444,7 +444,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
switch (lsts) {
case USB_LINK_ACA_RID_B_8500:
event = UX500_MUSB_RIDB;
- /* Fall through */
+ fallthrough;
case USB_LINK_NOT_CONFIGURED_8500:
case USB_LINK_NOT_VALID_LINK_8500:
ab->mode = USB_IDLE;
@@ -461,7 +461,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
case USB_LINK_ACA_RID_C_HS_8500:
case USB_LINK_ACA_RID_C_HS_CHIRP_8500:
event = UX500_MUSB_RIDC;
- /* Fall through */
+ fallthrough;
case USB_LINK_STD_HOST_NC_8500:
case USB_LINK_STD_HOST_C_NS_8500:
case USB_LINK_STD_HOST_C_S_8500:
@@ -481,7 +481,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
case USB_LINK_ACA_RID_A_8500:
event = UX500_MUSB_RIDA;
- /* Fall through */
+ fallthrough;
case USB_LINK_HM_IDGND_8500:
if (ab->mode == USB_IDLE) {
ab->mode = USB_HOST;
diff --git a/drivers/usb/phy/phy-am335x-control.c b/drivers/usb/phy/phy-am335x-control.c
index d16dfc320faa..97e6603c7149 100644
--- a/drivers/usb/phy/phy-am335x-control.c
+++ b/drivers/usb/phy/phy-am335x-control.c
@@ -149,7 +149,6 @@ EXPORT_SYMBOL_GPL(am335x_get_phy_control);
static int am335x_control_usb_probe(struct platform_device *pdev)
{
- struct resource *res;
struct am335x_control_usb *ctrl_usb;
const struct of_device_id *of_id;
const struct phy_control *phy_ctrl;
@@ -166,13 +165,11 @@ static int am335x_control_usb_probe(struct platform_device *pdev)
ctrl_usb->dev = &pdev->dev;
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
- ctrl_usb->phy_reg = devm_ioremap_resource(&pdev->dev, res);
+ ctrl_usb->phy_reg = devm_platform_ioremap_resource_byname(pdev, "phy_ctrl");
if (IS_ERR(ctrl_usb->phy_reg))
return PTR_ERR(ctrl_usb->phy_reg);
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "wakeup");
- ctrl_usb->wkup = devm_ioremap_resource(&pdev->dev, res);
+ ctrl_usb->wkup = devm_platform_ioremap_resource_byname(pdev, "wakeup");
if (IS_ERR(ctrl_usb->wkup))
return PTR_ERR(ctrl_usb->wkup);
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index b451f4695f3f..f34c9437a182 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -911,10 +911,10 @@ int usb_otg_start(struct platform_device *pdev)
break;
case FSL_USB2_PHY_UTMI_WIDE:
temp |= PORTSC_PTW_16BIT;
- /* fall through */
+ fallthrough;
case FSL_USB2_PHY_UTMI:
temp |= PORTSC_PTS_UTMI;
- /* fall through */
+ fallthrough;
default:
break;
}
@@ -957,159 +957,6 @@ int usb_otg_start(struct platform_device *pdev)
return 0;
}
-/*
- * state file in sysfs
- */
-static ssize_t show_fsl_usb2_otg_state(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct otg_fsm *fsm = &fsl_otg_dev->fsm;
- char *next = buf;
- unsigned size = PAGE_SIZE;
- int t;
-
- mutex_lock(&fsm->lock);
-
- /* basic driver infomation */
- t = scnprintf(next, size,
- DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n",
- DRIVER_VERSION);
- size -= t;
- next += t;
-
- /* Registers */
- t = scnprintf(next, size,
- "OTGSC: 0x%08x\n"
- "PORTSC: 0x%08x\n"
- "USBMODE: 0x%08x\n"
- "USBCMD: 0x%08x\n"
- "USBSTS: 0x%08x\n"
- "USBINTR: 0x%08x\n",
- fsl_readl(&usb_dr_regs->otgsc),
- fsl_readl(&usb_dr_regs->portsc),
- fsl_readl(&usb_dr_regs->usbmode),
- fsl_readl(&usb_dr_regs->usbcmd),
- fsl_readl(&usb_dr_regs->usbsts),
- fsl_readl(&usb_dr_regs->usbintr));
- size -= t;
- next += t;
-
- /* State */
- t = scnprintf(next, size,
- "OTG state: %s\n\n",
- usb_otg_state_string(fsl_otg_dev->phy.otg->state));
- size -= t;
- next += t;
-
- /* State Machine Variables */
- t = scnprintf(next, size,
- "a_bus_req: %d\n"
- "b_bus_req: %d\n"
- "a_bus_resume: %d\n"
- "a_bus_suspend: %d\n"
- "a_conn: %d\n"
- "a_sess_vld: %d\n"
- "a_srp_det: %d\n"
- "a_vbus_vld: %d\n"
- "b_bus_resume: %d\n"
- "b_bus_suspend: %d\n"
- "b_conn: %d\n"
- "b_se0_srp: %d\n"
- "b_ssend_srp: %d\n"
- "b_sess_vld: %d\n"
- "id: %d\n",
- fsm->a_bus_req,
- fsm->b_bus_req,
- fsm->a_bus_resume,
- fsm->a_bus_suspend,
- fsm->a_conn,
- fsm->a_sess_vld,
- fsm->a_srp_det,
- fsm->a_vbus_vld,
- fsm->b_bus_resume,
- fsm->b_bus_suspend,
- fsm->b_conn,
- fsm->b_se0_srp,
- fsm->b_ssend_srp,
- fsm->b_sess_vld,
- fsm->id);
- size -= t;
- next += t;
-
- mutex_unlock(&fsm->lock);
-
- return PAGE_SIZE - size;
-}
-
-static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL);
-
-static struct attribute *fsl_otg_attrs[] = {
- &dev_attr_fsl_usb2_otg_state.attr,
- NULL,
-};
-ATTRIBUTE_GROUPS(fsl_otg);
-
-/* Char driver interface to control some OTG input */
-
-/*
- * Handle some ioctl command, such as get otg
- * status and set host suspend
- */
-static long fsl_otg_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- u32 retval = 0;
-
- switch (cmd) {
- case GET_OTG_STATUS:
- retval = fsl_otg_dev->host_working;
- break;
-
- case SET_A_SUSPEND_REQ:
- fsl_otg_dev->fsm.a_suspend_req_inf = arg;
- break;
-
- case SET_A_BUS_DROP:
- fsl_otg_dev->fsm.a_bus_drop = arg;
- break;
-
- case SET_A_BUS_REQ:
- fsl_otg_dev->fsm.a_bus_req = arg;
- break;
-
- case SET_B_BUS_REQ:
- fsl_otg_dev->fsm.b_bus_req = arg;
- break;
-
- default:
- break;
- }
-
- otg_statemachine(&fsl_otg_dev->fsm);
-
- return retval;
-}
-
-static int fsl_otg_open(struct inode *inode, struct file *file)
-{
- return 0;
-}
-
-static int fsl_otg_release(struct inode *inode, struct file *file)
-{
- return 0;
-}
-
-static const struct file_operations otg_fops = {
- .owner = THIS_MODULE,
- .llseek = NULL,
- .read = NULL,
- .write = NULL,
- .unlocked_ioctl = fsl_otg_ioctl,
- .open = fsl_otg_open,
- .release = fsl_otg_release,
-};
-
static int fsl_otg_probe(struct platform_device *pdev)
{
int ret;
@@ -1131,12 +978,6 @@ static int fsl_otg_probe(struct platform_device *pdev)
return ret;
}
- ret = register_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME, &otg_fops);
- if (ret) {
- dev_err(&pdev->dev, "unable to register FSL OTG device\n");
- return ret;
- }
-
return ret;
}
@@ -1153,8 +994,6 @@ static int fsl_otg_remove(struct platform_device *pdev)
kfree(fsl_otg_dev->phy.otg);
kfree(fsl_otg_dev);
- unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME);
-
if (pdata->exit)
pdata->exit(pdev);
@@ -1167,7 +1006,6 @@ struct platform_driver fsl_otg_driver = {
.driver = {
.name = driver_name,
.owner = THIS_MODULE,
- .dev_groups = fsl_otg_groups,
},
};
diff --git a/drivers/usb/phy/phy-fsl-usb.h b/drivers/usb/phy/phy-fsl-usb.h
index fbcc28ad9964..d70341ae5a92 100644
--- a/drivers/usb/phy/phy-fsl-usb.h
+++ b/drivers/usb/phy/phy-fsl-usb.h
@@ -371,21 +371,7 @@ struct fsl_otg_config {
u8 otg_port;
};
-/* For SRP and HNP handle */
-#define FSL_OTG_MAJOR 240
#define FSL_OTG_NAME "fsl-usb2-otg"
-/* Command to OTG driver ioctl */
-#define OTG_IOCTL_MAGIC FSL_OTG_MAJOR
-/* if otg work as host, it should return 1, otherwise return 0 */
-#define GET_OTG_STATUS _IOR(OTG_IOCTL_MAGIC, 1, int)
-#define SET_A_SUSPEND_REQ _IOW(OTG_IOCTL_MAGIC, 2, int)
-#define SET_A_BUS_DROP _IOW(OTG_IOCTL_MAGIC, 3, int)
-#define SET_A_BUS_REQ _IOW(OTG_IOCTL_MAGIC, 4, int)
-#define SET_B_BUS_REQ _IOW(OTG_IOCTL_MAGIC, 5, int)
-#define GET_A_SUSPEND_REQ _IOR(OTG_IOCTL_MAGIC, 6, int)
-#define GET_A_BUS_DROP _IOR(OTG_IOCTL_MAGIC, 7, int)
-#define GET_A_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 8, int)
-#define GET_B_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 9, int)
void fsl_otg_add_timer(struct otg_fsm *fsm, void *timer);
void fsl_otg_del_timer(struct otg_fsm *fsm, void *timer);
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 7041ba030052..4a6462c92ef2 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -581,11 +581,11 @@ pulldown:
/* HNP failed for some reason (A_AIDL_BDIS timeout) */
notresponding(isp);
- /* FALLTHROUGH */
+ fallthrough;
case OTG_STATE_A_VBUS_ERR:
isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
pr_debug(" --> a_wait_vfall\n");
- /* FALLTHROUGH */
+ fallthrough;
case OTG_STATE_A_WAIT_VFALL:
/* FIXME usbcore thinks port power is still on ... */
clr |= OTG1_VBUS_DRV;
@@ -595,7 +595,7 @@ pulldown:
isp->phy.otg->state = OTG_STATE_A_WAIT_VRISE;
pr_debug(" --> a_wait_vrise\n");
}
- /* FALLTHROUGH */
+ fallthrough;
default:
toggle(OTG_DRV_VBUS, OTG1_VBUS_DRV);
}
@@ -945,10 +945,10 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
switch (state) {
case OTG_STATE_B_IDLE:
a_idle(isp, "idle");
- /* FALLTHROUGH */
+ fallthrough;
case OTG_STATE_A_IDLE:
enable_vbus_source(isp);
- /* FALLTHROUGH */
+ fallthrough;
case OTG_STATE_A_WAIT_VRISE:
/* we skip over OTG_STATE_A_WAIT_BCON, since
* the HC will transition to A_HOST (or
@@ -1032,12 +1032,12 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
OTG1_DP_PULLUP);
dump_regs(isp, __func__);
#endif
- /* FALLTHROUGH */
+ fallthrough;
case OTG_STATE_B_SRP_INIT:
b_idle(isp, __func__);
l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
omap_writel(l, OTG_CTRL);
- /* FALLTHROUGH */
+ fallthrough;
case OTG_STATE_B_IDLE:
if (otg->gadget && (isp_bstat & OTG_B_SESS_VLD)) {
#ifdef CONFIG_USB_OTG
diff --git a/drivers/usb/phy/phy-jz4770.c b/drivers/usb/phy/phy-jz4770.c
index 8f62dc2a90ff..d4ee3cb721ea 100644
--- a/drivers/usb/phy/phy-jz4770.c
+++ b/drivers/usb/phy/phy-jz4770.c
@@ -1,7 +1,9 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Ingenic JZ4770 USB PHY driver
+ * Ingenic SoCs USB PHY driver
* Copyright (c) Paul Cercueil <paul@crapouillou.net>
+ * Copyright (c) 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
+ * Copyright (c) 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
*/
#include <linux/clk.h>
@@ -12,66 +14,95 @@
#include <linux/usb/otg.h>
#include <linux/usb/phy.h>
-#define REG_USBPCR_OFFSET 0x00
-#define REG_USBRDT_OFFSET 0x04
-#define REG_USBVBFIL_OFFSET 0x08
-#define REG_USBPCR1_OFFSET 0x0c
-
-/* USBPCR */
-#define USBPCR_USB_MODE BIT(31)
-#define USBPCR_AVLD_REG BIT(30)
-#define USBPCR_INCRM BIT(27)
-#define USBPCR_CLK12_EN BIT(26)
-#define USBPCR_COMMONONN BIT(25)
-#define USBPCR_VBUSVLDEXT BIT(24)
-#define USBPCR_VBUSVLDEXTSEL BIT(23)
-#define USBPCR_POR BIT(22)
-#define USBPCR_SIDDQ BIT(21)
-#define USBPCR_OTG_DISABLE BIT(20)
-#define USBPCR_TXPREEMPHTUNE BIT(6)
+/* OTGPHY register offsets */
+#define REG_USBPCR_OFFSET 0x00
+#define REG_USBRDT_OFFSET 0x04
+#define REG_USBVBFIL_OFFSET 0x08
+#define REG_USBPCR1_OFFSET 0x0c
+
+/* bits within the USBPCR register */
+#define USBPCR_USB_MODE BIT(31)
+#define USBPCR_AVLD_REG BIT(30)
+#define USBPCR_COMMONONN BIT(25)
+#define USBPCR_VBUSVLDEXT BIT(24)
+#define USBPCR_VBUSVLDEXTSEL BIT(23)
+#define USBPCR_POR BIT(22)
+#define USBPCR_SIDDQ BIT(21)
+#define USBPCR_OTG_DISABLE BIT(20)
+#define USBPCR_TXPREEMPHTUNE BIT(6)
#define USBPCR_IDPULLUP_LSB 28
-#define USBPCR_IDPULLUP_MASK GENMASK(29, USBPCR_IDPULLUP_LSB)
-#define USBPCR_IDPULLUP_ALWAYS (3 << USBPCR_IDPULLUP_LSB)
-#define USBPCR_IDPULLUP_SUSPEND (1 << USBPCR_IDPULLUP_LSB)
-#define USBPCR_IDPULLUP_OTG (0 << USBPCR_IDPULLUP_LSB)
+#define USBPCR_IDPULLUP_MASK GENMASK(29, USBPCR_IDPULLUP_LSB)
+#define USBPCR_IDPULLUP_ALWAYS (0x2 << USBPCR_IDPULLUP_LSB)
+#define USBPCR_IDPULLUP_SUSPEND (0x1 << USBPCR_IDPULLUP_LSB)
+#define USBPCR_IDPULLUP_OTG (0x0 << USBPCR_IDPULLUP_LSB)
-#define USBPCR_COMPDISTUNE_LSB 17
-#define USBPCR_COMPDISTUNE_MASK GENMASK(19, USBPCR_COMPDISTUNE_LSB)
-#define USBPCR_COMPDISTUNE_DFT 4
+#define USBPCR_COMPDISTUNE_LSB 17
+#define USBPCR_COMPDISTUNE_MASK GENMASK(19, USBPCR_COMPDISTUNE_LSB)
+#define USBPCR_COMPDISTUNE_DFT (0x4 << USBPCR_COMPDISTUNE_LSB)
-#define USBPCR_OTGTUNE_LSB 14
-#define USBPCR_OTGTUNE_MASK GENMASK(16, USBPCR_OTGTUNE_LSB)
-#define USBPCR_OTGTUNE_DFT 4
+#define USBPCR_OTGTUNE_LSB 14
+#define USBPCR_OTGTUNE_MASK GENMASK(16, USBPCR_OTGTUNE_LSB)
+#define USBPCR_OTGTUNE_DFT (0x4 << USBPCR_OTGTUNE_LSB)
#define USBPCR_SQRXTUNE_LSB 11
-#define USBPCR_SQRXTUNE_MASK GENMASK(13, USBPCR_SQRXTUNE_LSB)
-#define USBPCR_SQRXTUNE_DFT 3
-
-#define USBPCR_TXFSLSTUNE_LSB 7
-#define USBPCR_TXFSLSTUNE_MASK GENMASK(10, USBPCR_TXFSLSTUNE_LSB)
-#define USBPCR_TXFSLSTUNE_DFT 3
-
-#define USBPCR_TXRISETUNE_LSB 4
-#define USBPCR_TXRISETUNE_MASK GENMASK(5, USBPCR_TXRISETUNE_LSB)
-#define USBPCR_TXRISETUNE_DFT 3
-
-#define USBPCR_TXVREFTUNE_LSB 0
-#define USBPCR_TXVREFTUNE_MASK GENMASK(3, USBPCR_TXVREFTUNE_LSB)
-#define USBPCR_TXVREFTUNE_DFT 5
-
-/* USBRDT */
-#define USBRDT_VBFIL_LD_EN BIT(25)
-#define USBRDT_IDDIG_EN BIT(24)
-#define USBRDT_IDDIG_REG BIT(23)
+#define USBPCR_SQRXTUNE_MASK GENMASK(13, USBPCR_SQRXTUNE_LSB)
+#define USBPCR_SQRXTUNE_DCR_20PCT (0x7 << USBPCR_SQRXTUNE_LSB)
+#define USBPCR_SQRXTUNE_DFT (0x3 << USBPCR_SQRXTUNE_LSB)
+
+#define USBPCR_TXFSLSTUNE_LSB 7
+#define USBPCR_TXFSLSTUNE_MASK GENMASK(10, USBPCR_TXFSLSTUNE_LSB)
+#define USBPCR_TXFSLSTUNE_DCR_50PPT (0xf << USBPCR_TXFSLSTUNE_LSB)
+#define USBPCR_TXFSLSTUNE_DCR_25PPT (0x7 << USBPCR_TXFSLSTUNE_LSB)
+#define USBPCR_TXFSLSTUNE_DFT (0x3 << USBPCR_TXFSLSTUNE_LSB)
+#define USBPCR_TXFSLSTUNE_INC_25PPT (0x1 << USBPCR_TXFSLSTUNE_LSB)
+#define USBPCR_TXFSLSTUNE_INC_50PPT (0x0 << USBPCR_TXFSLSTUNE_LSB)
+
+#define USBPCR_TXHSXVTUNE_LSB 4
+#define USBPCR_TXHSXVTUNE_MASK GENMASK(5, USBPCR_TXHSXVTUNE_LSB)
+#define USBPCR_TXHSXVTUNE_DFT (0x3 << USBPCR_TXHSXVTUNE_LSB)
+#define USBPCR_TXHSXVTUNE_DCR_15MV (0x1 << USBPCR_TXHSXVTUNE_LSB)
+
+#define USBPCR_TXRISETUNE_LSB 4
+#define USBPCR_TXRISETUNE_MASK GENMASK(5, USBPCR_TXRISETUNE_LSB)
+#define USBPCR_TXRISETUNE_DFT (0x3 << USBPCR_TXRISETUNE_LSB)
+
+#define USBPCR_TXVREFTUNE_LSB 0
+#define USBPCR_TXVREFTUNE_MASK GENMASK(3, USBPCR_TXVREFTUNE_LSB)
+#define USBPCR_TXVREFTUNE_INC_25PPT (0x7 << USBPCR_TXVREFTUNE_LSB)
+#define USBPCR_TXVREFTUNE_DFT (0x5 << USBPCR_TXVREFTUNE_LSB)
+
+/* bits within the USBRDTR register */
+#define USBRDT_UTMI_RST BIT(27)
+#define USBRDT_HB_MASK BIT(26)
+#define USBRDT_VBFIL_LD_EN BIT(25)
+#define USBRDT_IDDIG_EN BIT(24)
+#define USBRDT_IDDIG_REG BIT(23)
+#define USBRDT_VBFIL_EN BIT(2)
+
+/* bits within the USBPCR1 register */
+#define USBPCR1_BVLD_REG BIT(31)
+#define USBPCR1_DPPD BIT(29)
+#define USBPCR1_DMPD BIT(28)
+#define USBPCR1_USB_SEL BIT(28)
+#define USBPCR1_WORD_IF_16BIT BIT(19)
+
+enum ingenic_usb_phy_version {
+ ID_JZ4770,
+ ID_JZ4780,
+ ID_X1000,
+ ID_X1830,
+};
-#define USBRDT_USBRDT_LSB 0
-#define USBRDT_USBRDT_MASK GENMASK(22, USBRDT_USBRDT_LSB)
+struct ingenic_soc_info {
+ enum ingenic_usb_phy_version version;
-/* USBPCR1 */
-#define USBPCR1_UHC_POWON BIT(5)
+ void (*usb_phy_init)(struct usb_phy *phy);
+};
struct jz4770_phy {
+ const struct ingenic_soc_info *soc_info;
+
struct usb_phy phy;
struct usb_otg otg;
struct device *dev;
@@ -90,12 +121,18 @@ static inline struct jz4770_phy *phy_to_jz4770_phy(struct usb_phy *phy)
return container_of(phy, struct jz4770_phy, phy);
}
-static int jz4770_phy_set_peripheral(struct usb_otg *otg,
+static int ingenic_usb_phy_set_peripheral(struct usb_otg *otg,
struct usb_gadget *gadget)
{
struct jz4770_phy *priv = otg_to_jz4770_phy(otg);
u32 reg;
+ if (priv->soc_info->version >= ID_X1000) {
+ reg = readl(priv->base + REG_USBPCR1_OFFSET);
+ reg |= USBPCR1_BVLD_REG;
+ writel(reg, priv->base + REG_USBPCR1_OFFSET);
+ }
+
reg = readl(priv->base + REG_USBPCR_OFFSET);
reg &= ~USBPCR_USB_MODE;
reg |= USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE;
@@ -104,7 +141,7 @@ static int jz4770_phy_set_peripheral(struct usb_otg *otg,
return 0;
}
-static int jz4770_phy_set_host(struct usb_otg *otg, struct usb_bus *host)
+static int ingenic_usb_phy_set_host(struct usb_otg *otg, struct usb_bus *host)
{
struct jz4770_phy *priv = otg_to_jz4770_phy(otg);
u32 reg;
@@ -117,7 +154,7 @@ static int jz4770_phy_set_host(struct usb_otg *otg, struct usb_bus *host)
return 0;
}
-static int jz4770_phy_init(struct usb_phy *phy)
+static int ingenic_usb_phy_init(struct usb_phy *phy)
{
struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
int err;
@@ -135,15 +172,7 @@ static int jz4770_phy_init(struct usb_phy *phy)
return err;
}
- reg = USBPCR_AVLD_REG | USBPCR_COMMONONN | USBPCR_IDPULLUP_ALWAYS |
- (USBPCR_COMPDISTUNE_DFT << USBPCR_COMPDISTUNE_LSB) |
- (USBPCR_OTGTUNE_DFT << USBPCR_OTGTUNE_LSB) |
- (USBPCR_SQRXTUNE_DFT << USBPCR_SQRXTUNE_LSB) |
- (USBPCR_TXFSLSTUNE_DFT << USBPCR_TXFSLSTUNE_LSB) |
- (USBPCR_TXRISETUNE_DFT << USBPCR_TXRISETUNE_LSB) |
- (USBPCR_TXVREFTUNE_DFT << USBPCR_TXVREFTUNE_LSB) |
- USBPCR_POR;
- writel(reg, priv->base + REG_USBPCR_OFFSET);
+ priv->soc_info->usb_phy_init(phy);
/* Wait for PHY to reset */
usleep_range(30, 300);
@@ -153,7 +182,7 @@ static int jz4770_phy_init(struct usb_phy *phy)
return 0;
}
-static void jz4770_phy_shutdown(struct usb_phy *phy)
+static void ingenic_usb_phy_shutdown(struct usb_phy *phy)
{
struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
@@ -161,11 +190,100 @@ static void jz4770_phy_shutdown(struct usb_phy *phy)
regulator_disable(priv->vcc_supply);
}
-static void jz4770_phy_remove(void *phy)
+static void ingenic_usb_phy_remove(void *phy)
{
usb_remove_phy(phy);
}
+static void jz4770_usb_phy_init(struct usb_phy *phy)
+{
+ struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+ u32 reg;
+
+ reg = USBPCR_AVLD_REG | USBPCR_COMMONONN | USBPCR_IDPULLUP_ALWAYS |
+ USBPCR_COMPDISTUNE_DFT | USBPCR_OTGTUNE_DFT | USBPCR_SQRXTUNE_DFT |
+ USBPCR_TXFSLSTUNE_DFT | USBPCR_TXRISETUNE_DFT | USBPCR_TXVREFTUNE_DFT |
+ USBPCR_POR;
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+}
+
+static void jz4780_usb_phy_init(struct usb_phy *phy)
+{
+ struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+ u32 reg;
+
+ reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_USB_SEL |
+ USBPCR1_WORD_IF_16BIT;
+ writel(reg, priv->base + REG_USBPCR1_OFFSET);
+
+ reg = USBPCR_TXPREEMPHTUNE | USBPCR_COMMONONN | USBPCR_POR;
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+}
+
+static void x1000_usb_phy_init(struct usb_phy *phy)
+{
+ struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+ u32 reg;
+
+ reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_WORD_IF_16BIT;
+ writel(reg, priv->base + REG_USBPCR1_OFFSET);
+
+ reg = USBPCR_SQRXTUNE_DCR_20PCT | USBPCR_TXPREEMPHTUNE |
+ USBPCR_TXHSXVTUNE_DCR_15MV | USBPCR_TXVREFTUNE_INC_25PPT |
+ USBPCR_COMMONONN | USBPCR_POR;
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+}
+
+static void x1830_usb_phy_init(struct usb_phy *phy)
+{
+ struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+ u32 reg;
+
+ /* rdt */
+ writel(USBRDT_VBFIL_EN | USBRDT_UTMI_RST, priv->base + REG_USBRDT_OFFSET);
+
+ reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_WORD_IF_16BIT |
+ USBPCR1_DMPD | USBPCR1_DPPD;
+ writel(reg, priv->base + REG_USBPCR1_OFFSET);
+
+ reg = USBPCR_IDPULLUP_OTG | USBPCR_VBUSVLDEXT | USBPCR_TXPREEMPHTUNE |
+ USBPCR_COMMONONN | USBPCR_POR;
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+}
+
+static const struct ingenic_soc_info jz4770_soc_info = {
+ .version = ID_JZ4770,
+
+ .usb_phy_init = jz4770_usb_phy_init,
+};
+
+static const struct ingenic_soc_info jz4780_soc_info = {
+ .version = ID_JZ4780,
+
+ .usb_phy_init = jz4780_usb_phy_init,
+};
+
+static const struct ingenic_soc_info x1000_soc_info = {
+ .version = ID_X1000,
+
+ .usb_phy_init = x1000_usb_phy_init,
+};
+
+static const struct ingenic_soc_info x1830_soc_info = {
+ .version = ID_X1830,
+
+ .usb_phy_init = x1830_usb_phy_init,
+};
+
+static const struct of_device_id ingenic_usb_phy_of_matches[] = {
+ { .compatible = "ingenic,jz4770-phy", .data = &jz4770_soc_info },
+ { .compatible = "ingenic,jz4780-phy", .data = &jz4780_soc_info },
+ { .compatible = "ingenic,x1000-phy", .data = &x1000_soc_info },
+ { .compatible = "ingenic,x1830-phy", .data = &x1830_soc_info },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ingenic_usb_phy_of_matches);
+
static int jz4770_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -176,18 +294,24 @@ static int jz4770_phy_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
+ priv->soc_info = device_get_match_data(&pdev->dev);
+ if (!priv->soc_info) {
+ dev_err(&pdev->dev, "Error: No device match found\n");
+ return -ENODEV;
+ }
+
platform_set_drvdata(pdev, priv);
priv->dev = dev;
priv->phy.dev = dev;
priv->phy.otg = &priv->otg;
- priv->phy.label = "jz4770-phy";
- priv->phy.init = jz4770_phy_init;
- priv->phy.shutdown = jz4770_phy_shutdown;
+ priv->phy.label = "ingenic-usb-phy";
+ priv->phy.init = ingenic_usb_phy_init;
+ priv->phy.shutdown = ingenic_usb_phy_shutdown;
priv->otg.state = OTG_STATE_UNDEFINED;
priv->otg.usb_phy = &priv->phy;
- priv->otg.set_host = jz4770_phy_set_host;
- priv->otg.set_peripheral = jz4770_phy_set_peripheral;
+ priv->otg.set_host = ingenic_usb_phy_set_host;
+ priv->otg.set_peripheral = ingenic_usb_phy_set_peripheral;
priv->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->base)) {
@@ -218,26 +342,20 @@ static int jz4770_phy_probe(struct platform_device *pdev)
return err;
}
- return devm_add_action_or_reset(dev, jz4770_phy_remove, &priv->phy);
+ return devm_add_action_or_reset(dev, ingenic_usb_phy_remove, &priv->phy);
}
-#ifdef CONFIG_OF
-static const struct of_device_id jz4770_phy_of_matches[] = {
- { .compatible = "ingenic,jz4770-phy" },
- { }
-};
-MODULE_DEVICE_TABLE(of, jz4770_phy_of_matches);
-#endif
-
-static struct platform_driver jz4770_phy_driver = {
+static struct platform_driver ingenic_phy_driver = {
.probe = jz4770_phy_probe,
.driver = {
.name = "jz4770-phy",
- .of_match_table = of_match_ptr(jz4770_phy_of_matches),
+ .of_match_table = of_match_ptr(ingenic_usb_phy_of_matches),
},
};
-module_platform_driver(jz4770_phy_driver);
+module_platform_driver(ingenic_phy_driver);
+MODULE_AUTHOR("周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>");
+MODULE_AUTHOR("漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>");
MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
-MODULE_DESCRIPTION("Ingenic JZ4770 USB PHY driver");
+MODULE_DESCRIPTION("Ingenic SoCs USB PHY driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/phy-keystone.c b/drivers/usb/phy/phy-keystone.c
index 9c226b57153b..358d05cb643d 100644
--- a/drivers/usb/phy/phy-keystone.c
+++ b/drivers/usb/phy/phy-keystone.c
@@ -2,7 +2,7 @@
/*
* phy-keystone - USB PHY, talking to dwc3 controller in Keystone.
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
*
* Author: WingMan Kwok <w-kwok2@ti.com>
*/
diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
index 06b47f1028b3..ce767ecc0636 100644
--- a/drivers/usb/phy/phy-mv-usb.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -334,7 +334,7 @@ static void mv_otg_update_state(struct mv_otg *mvotg)
switch (old_state) {
case OTG_STATE_UNDEFINED:
mvotg->phy.otg->state = OTG_STATE_B_IDLE;
- /* FALL THROUGH */
+ fallthrough;
case OTG_STATE_B_IDLE:
if (otg_ctrl->id == 0)
mvotg->phy.otg->state = OTG_STATE_A_IDLE;
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index 9a7e655d5280..8ba6c5a91557 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -2,7 +2,7 @@
/*
* twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
*
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com
*
* Author: Hema HK <hemahk@ti.com>
*/
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index ad2554630889..b47285f023cf 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -88,7 +88,7 @@ static void usb_phy_set_default_current(struct usb_phy *usb_phy)
/**
* usb_phy_notify_charger_work - notify the USB charger state
- * @work - the charger work to notify the USB charger state
+ * @work: the charger work to notify the USB charger state
*
* This work can be issued when USB charger state has been changed or
* USB charger current has been changed, then we can notify the current
@@ -160,9 +160,9 @@ static void __usb_phy_get_charger_type(struct usb_phy *usb_phy)
/**
* usb_phy_get_charger_type - get charger type from extcon subsystem
- * @nb -the notifier block to determine charger type
- * @state - the cable state
- * @data - private data
+ * @nb: the notifier block to determine charger type
+ * @state: the cable state
+ * @data: private data
*
* Determin the charger type from extcon subsystem which also means the
* charger state has been chaned, then we should notify this event.
@@ -178,8 +178,8 @@ static int usb_phy_get_charger_type(struct notifier_block *nb,
/**
* usb_phy_set_charger_current - set the USB charger current
- * @usb_phy - the USB phy to be used
- * @mA - the current need to be set
+ * @usb_phy: the USB phy to be used
+ * @mA: the current need to be set
*
* Usually we only change the charger default current when USB finished the
* enumeration as one SDP charger. As one SDP charger, usb_phy_set_power()
@@ -231,9 +231,9 @@ EXPORT_SYMBOL_GPL(usb_phy_set_charger_current);
/**
* usb_phy_get_charger_current - get the USB charger current
- * @usb_phy - the USB phy to be used
- * @min - the minimum current
- * @max - the maximum current
+ * @usb_phy: the USB phy to be used
+ * @min: the minimum current
+ * @max: the maximum current
*
* Usually we will notify the maximum current to power user, but for some
* special case, power user also need the minimum current value. Then the
@@ -269,8 +269,8 @@ EXPORT_SYMBOL_GPL(usb_phy_get_charger_current);
/**
* usb_phy_set_charger_state - set the USB charger state
- * @usb_phy - the USB phy to be used
- * @state - the new state need to be set for charger
+ * @usb_phy: the USB phy to be used
+ * @state: the new state need to be set for charger
*
* The usb phy driver can issue this function when the usb phy driver
* detected the charger state has been changed, in this case the charger
@@ -414,8 +414,8 @@ static int usb_add_extcon(struct usb_phy *x)
/**
* devm_usb_get_phy - find the USB PHY
- * @dev - device that requests this phy
- * @type - the type of the phy the controller requires
+ * @dev: device that requests this phy
+ * @type: the type of the phy the controller requires
*
* Gets the phy using usb_get_phy(), and associates a device with it using
* devres. On driver detach, release function is invoked on the devres data,
@@ -444,7 +444,7 @@ EXPORT_SYMBOL_GPL(devm_usb_get_phy);
/**
* usb_get_phy - find the USB PHY
- * @type - the type of the phy the controller requires
+ * @type: the type of the phy the controller requires
*
* Returns the phy driver, after getting a refcount to it; or
* -ENODEV if there is no such phy. The caller is responsible for
@@ -480,9 +480,9 @@ EXPORT_SYMBOL_GPL(usb_get_phy);
/**
* devm_usb_get_phy_by_node - find the USB PHY by device_node
- * @dev - device that requests this phy
- * @node - the device_node for the phy device.
- * @nb - a notifier_block to register with the phy.
+ * @dev: device that requests this phy
+ * @node: the device_node for the phy device.
+ * @nb: a notifier_block to register with the phy.
*
* Returns the phy driver associated with the given device_node,
* after getting a refcount to it, -ENODEV if there is no such phy or
@@ -540,9 +540,9 @@ EXPORT_SYMBOL_GPL(devm_usb_get_phy_by_node);
/**
* devm_usb_get_phy_by_phandle - find the USB PHY by phandle
- * @dev - device that requests this phy
- * @phandle - name of the property holding the phy phandle value
- * @index - the index of the phy
+ * @dev: device that requests this phy
+ * @phandle: name of the property holding the phy phandle value
+ * @index: the index of the phy
*
* Returns the phy driver associated with the given phandle value,
* after getting a refcount to it, -ENODEV if there is no such phy or
@@ -578,8 +578,8 @@ EXPORT_SYMBOL_GPL(devm_usb_get_phy_by_phandle);
/**
* devm_usb_put_phy - release the USB PHY
- * @dev - device that wants to release this phy
- * @phy - the phy returned by devm_usb_get_phy()
+ * @dev: device that wants to release this phy
+ * @phy: the phy returned by devm_usb_get_phy()
*
* destroys the devres associated with this phy and invokes usb_put_phy
* to release the phy.
@@ -615,9 +615,9 @@ void usb_put_phy(struct usb_phy *x)
EXPORT_SYMBOL_GPL(usb_put_phy);
/**
- * usb_add_phy - declare the USB PHY
+ * usb_add_phy: declare the USB PHY
* @x: the USB phy to be used; or NULL
- * @type - the type of this PHY
+ * @type: the type of this PHY
*
* This call is exclusively for use by phy drivers, which
* coordinate the activities of drivers for host and peripheral
@@ -714,6 +714,7 @@ EXPORT_SYMBOL_GPL(usb_remove_phy);
/**
* usb_phy_set_event - set event to phy event
* @x: the phy returned by usb_get_phy();
+ * @event: event to set
*
* This sets event to phy event
*/
generated by cgit (git 2.34.1) at 2025-06-01 14:03:10 +0000