diff options
Diffstat (limited to 'drivers/net/phy/sfp.c')
| -rw-r--r-- | drivers/net/phy/sfp.c | 23 |
1 files changed, 18 insertions, 5 deletions
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index fb98db61e06c..bf345032d450 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -210,6 +210,12 @@ static const enum gpiod_flags gpio_flags[] = { #define SFP_PHY_ADDR 22 #define SFP_PHY_ADDR_ROLLBALL 17 +/* SFP_EEPROM_BLOCK_SIZE is the size of data chunk to read the EEPROM + * at a time. Some SFP modules and also some Linux I2C drivers do not like + * reads longer than 16 bytes. + */ +#define SFP_EEPROM_BLOCK_SIZE 16 + struct sff_data { unsigned int gpios; bool (*module_supported)(const struct sfp_eeprom_id *id); @@ -387,6 +393,10 @@ static const struct sfp_quirk sfp_quirks[] = { SFP_QUIRK_F("HALNy", "HL-GSFP", sfp_fixup_halny_gsfp), + // HG MXPD-483II-F 2.5G supports 2500Base-X, but incorrectly reports + // 2600MBd in their EERPOM + SFP_QUIRK_M("HG GENUINE", "MXPD-483II", sfp_quirk_2500basex), + // Huawei MA5671A can operate at 2500base-X, but report 1.2GBd NRZ in // their EEPROM SFP_QUIRK("HUAWEI", "MA5671A", sfp_quirk_2500basex, @@ -1925,11 +1935,7 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report) u8 check; int ret; - /* Some SFP modules and also some Linux I2C drivers do not like reads - * longer than 16 bytes, so read the EEPROM in chunks of 16 bytes at - * a time. - */ - sfp->i2c_block_size = 16; + sfp->i2c_block_size = SFP_EEPROM_BLOCK_SIZE; ret = sfp_read(sfp, false, 0, &id.base, sizeof(id.base)); if (ret < 0) { @@ -2481,6 +2487,9 @@ static int sfp_module_eeprom(struct sfp *sfp, struct ethtool_eeprom *ee, unsigned int first, last, len; int ret; + if (!(sfp->state & SFP_F_PRESENT)) + return -ENODEV; + if (ee->len == 0) return -EINVAL; @@ -2513,6 +2522,9 @@ static int sfp_module_eeprom_by_page(struct sfp *sfp, const struct ethtool_module_eeprom *page, struct netlink_ext_ack *extack) { + if (!(sfp->state & SFP_F_PRESENT)) + return -ENODEV; + if (page->bank) { NL_SET_ERR_MSG(extack, "Banks not supported"); return -EOPNOTSUPP; @@ -2617,6 +2629,7 @@ static struct sfp *sfp_alloc(struct device *dev) return ERR_PTR(-ENOMEM); sfp->dev = dev; + sfp->i2c_block_size = SFP_EEPROM_BLOCK_SIZE; mutex_init(&sfp->sm_mutex); mutex_init(&sfp->st_mutex); |