diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 17 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 17 |
2 files changed, 15 insertions, 19 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index ce227b56cf72..2f9655cf5dd9 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1205,12 +1205,10 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) if (ret_val) goto out; - if (hw->mac.type != e1000_pch_mtp) { - ret_val = e1000e_force_smbus(hw); - if (ret_val) { - e_dbg("Failed to force SMBUS: %d\n", ret_val); - goto release; - } + ret_val = e1000e_force_smbus(hw); + if (ret_val) { + e_dbg("Failed to force SMBUS: %d\n", ret_val); + goto release; } /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable @@ -1273,13 +1271,6 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) } release: - if (hw->mac.type == e1000_pch_mtp) { - ret_val = e1000e_force_smbus(hw); - if (ret_val) - e_dbg("Failed to force SMBUS over MTL system: %d\n", - ret_val); - } - hw->phy.ops.release(hw); out: if (ret_val) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 07e903346358..286155efcedf 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -2928,11 +2928,8 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) tx_ring->head = adapter->hw.hw_addr + E1000_TDH(0); tx_ring->tail = adapter->hw.hw_addr + E1000_TDT(0); - writel(0, tx_ring->head); if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) e1000e_update_tdt_wa(tx_ring, 0); - else - writel(0, tx_ring->tail); /* Set the Tx Interrupt Delay register */ ew32(TIDV, adapter->tx_int_delay); @@ -3253,11 +3250,8 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) rx_ring->head = adapter->hw.hw_addr + E1000_RDH(0); rx_ring->tail = adapter->hw.hw_addr + E1000_RDT(0); - writel(0, rx_ring->head); if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) e1000e_update_rdt_wa(rx_ring, 0); - else - writel(0, rx_ring->tail); /* Enable Receive Checksum Offload for TCP and UDP */ rxcsum = er32(RXCSUM); @@ -4613,6 +4607,7 @@ int e1000e_open(struct net_device *netdev) struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; int err; + int irq; /* disallow open during test */ if (test_bit(__E1000_TESTING, &adapter->state)) @@ -4676,7 +4671,15 @@ int e1000e_open(struct net_device *netdev) /* From here on the code is the same as e1000e_up() */ clear_bit(__E1000_DOWN, &adapter->state); + if (adapter->int_mode == E1000E_INT_MODE_MSIX) + irq = adapter->msix_entries[0].vector; + else + irq = adapter->pdev->irq; + + netif_napi_set_irq(&adapter->napi, irq); napi_enable(&adapter->napi); + netif_queue_set_napi(netdev, 0, NETDEV_QUEUE_TYPE_RX, &adapter->napi); + netif_queue_set_napi(netdev, 0, NETDEV_QUEUE_TYPE_TX, &adapter->napi); e1000_irq_enable(adapter); @@ -4735,6 +4738,8 @@ int e1000e_close(struct net_device *netdev) netdev_info(netdev, "NIC Link is Down\n"); } + netif_queue_set_napi(netdev, 0, NETDEV_QUEUE_TYPE_RX, NULL); + netif_queue_set_napi(netdev, 0, NETDEV_QUEUE_TYPE_TX, NULL); napi_disable(&adapter->napi); e1000e_free_tx_resources(adapter->tx_ring); |