diff options
Diffstat (limited to 'drivers/net/ethernet/cadence/macb_main.c')
-rw-r--r-- | drivers/net/ethernet/cadence/macb_main.c | 41 |
1 files changed, 24 insertions, 17 deletions
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 66cc7927061a..f2915f2fe21a 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -56,8 +56,7 @@ /* level of occupied TX descriptors under which we wake up TX process */ #define MACB_TX_WAKEUP_THRESH(bp) (3 * (bp)->tx_ring_size / 4) -#define MACB_RX_INT_FLAGS (MACB_BIT(RCOMP) | MACB_BIT(RXUBR) \ - | MACB_BIT(ISR_ROVR)) +#define MACB_RX_INT_FLAGS (MACB_BIT(RCOMP) | MACB_BIT(ISR_ROVR)) #define MACB_TX_ERR_FLAGS (MACB_BIT(ISR_TUND) \ | MACB_BIT(ISR_RLE) \ | MACB_BIT(TXERR)) @@ -1270,7 +1269,7 @@ static int macb_poll(struct napi_struct *napi, int budget) queue_writel(queue, ISR, MACB_BIT(RCOMP)); napi_reschedule(napi); } else { - queue_writel(queue, IER, MACB_RX_INT_FLAGS); + queue_writel(queue, IER, bp->rx_intr_mask); } } @@ -1288,7 +1287,7 @@ static void macb_hresp_error_task(unsigned long data) u32 ctrl; for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue) { - queue_writel(queue, IDR, MACB_RX_INT_FLAGS | + queue_writel(queue, IDR, bp->rx_intr_mask | MACB_TX_INT_FLAGS | MACB_BIT(HRESP)); } @@ -1318,7 +1317,7 @@ static void macb_hresp_error_task(unsigned long data) /* Enable interrupts */ queue_writel(queue, IER, - MACB_RX_INT_FLAGS | + bp->rx_intr_mask | MACB_TX_INT_FLAGS | MACB_BIT(HRESP)); } @@ -1372,14 +1371,14 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) (unsigned int)(queue - bp->queues), (unsigned long)status); - if (status & MACB_RX_INT_FLAGS) { + if (status & bp->rx_intr_mask) { /* There's no point taking any more interrupts * until we have processed the buffers. The * scheduling call may fail if the poll routine * is already scheduled, so disable interrupts * now. */ - queue_writel(queue, IDR, MACB_RX_INT_FLAGS); + queue_writel(queue, IDR, bp->rx_intr_mask); if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) queue_writel(queue, ISR, MACB_BIT(RCOMP)); @@ -1412,8 +1411,9 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) /* There is a hardware issue under heavy load where DMA can * stop, this causes endless "used buffer descriptor read" * interrupts but it can be cleared by re-enabling RX. See - * the at91 manual, section 41.3.1 or the Zynq manual - * section 16.7.4 for details. + * the at91rm9200 manual, section 41.3.1 or the Zynq manual + * section 16.7.4 for details. RXUBR is only enabled for + * these two versions. */ if (status & MACB_BIT(RXUBR)) { ctrl = macb_readl(bp, NCR); @@ -1734,7 +1734,7 @@ static int macb_pad_and_fcs(struct sk_buff **skb, struct net_device *ndev) if (!nskb) return -ENOMEM; - dev_kfree_skb_any(*skb); + dev_consume_skb_any(*skb); *skb = nskb; } @@ -2259,7 +2259,7 @@ static void macb_init_hw(struct macb *bp) /* Enable interrupts */ queue_writel(queue, IER, - MACB_RX_INT_FLAGS | + bp->rx_intr_mask | MACB_TX_INT_FLAGS | MACB_BIT(HRESP)); } @@ -3673,9 +3673,9 @@ static netdev_tx_t at91ether_start_xmit(struct sk_buff *skb, /* Store packet information (to free when Tx completed) */ lp->skb = skb; lp->skb_length = skb->len; - lp->skb_physaddr = dma_map_single(NULL, skb->data, skb->len, - DMA_TO_DEVICE); - if (dma_mapping_error(NULL, lp->skb_physaddr)) { + lp->skb_physaddr = dma_map_single(&lp->pdev->dev, skb->data, + skb->len, DMA_TO_DEVICE); + if (dma_mapping_error(&lp->pdev->dev, lp->skb_physaddr)) { dev_kfree_skb_any(skb); dev->stats.tx_dropped++; netdev_err(dev, "%s: DMA mapping error\n", __func__); @@ -3763,9 +3763,9 @@ static irqreturn_t at91ether_interrupt(int irq, void *dev_id) dev->stats.tx_errors++; if (lp->skb) { - dev_kfree_skb_irq(lp->skb); + dev_consume_skb_irq(lp->skb); lp->skb = NULL; - dma_unmap_single(NULL, lp->skb_physaddr, + dma_unmap_single(&lp->pdev->dev, lp->skb_physaddr, lp->skb_length, DMA_TO_DEVICE); dev->stats.tx_packets++; dev->stats.tx_bytes += lp->skb_length; @@ -3907,6 +3907,7 @@ static const struct macb_config sama5d4_config = { }; static const struct macb_config emac_config = { + .caps = MACB_CAPS_NEEDS_RSTONUBR, .clk_init = at91ether_clk_init, .init = at91ether_init, }; @@ -3928,7 +3929,8 @@ static const struct macb_config zynqmp_config = { }; static const struct macb_config zynq_config = { - .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_NO_GIGABIT_HALF, + .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_NO_GIGABIT_HALF | + MACB_CAPS_NEEDS_RSTONUBR, .dma_burst_length = 16, .clk_init = macb_clk_init, .init = macb_init, @@ -3941,6 +3943,7 @@ static const struct of_device_id macb_dt_ids[] = { { .compatible = "cdns,np4-macb", .data = &np4_config }, { .compatible = "cdns,pc302-gem", .data = &pc302gem_config }, { .compatible = "cdns,gem", .data = &pc302gem_config }, + { .compatible = "cdns,sam9x60-macb", .data = &at91sam9260_config }, { .compatible = "atmel,sama5d2-gem", .data = &sama5d2_config }, { .compatible = "atmel,sama5d3-gem", .data = &sama5d3_config }, { .compatible = "atmel,sama5d3-macb", .data = &sama5d3macb_config }, @@ -4083,6 +4086,10 @@ static int macb_probe(struct platform_device *pdev) macb_dma_desc_get_size(bp); } + bp->rx_intr_mask = MACB_RX_INT_FLAGS; + if (bp->caps & MACB_CAPS_NEEDS_RSTONUBR) + bp->rx_intr_mask |= MACB_BIT(RXUBR); + mac = of_get_mac_address(np); if (mac) { ether_addr_copy(bp->dev->dev_addr, mac); |