diff options
Diffstat (limited to 'drivers/net/dsa/sja1105')
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105.h | 29 | ||||
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_clocking.c | 37 | ||||
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_devlink.c | 2 | ||||
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_dynamic_config.c | 91 | ||||
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_flower.c | 2 | ||||
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_main.c | 168 | ||||
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_mdio.c | 2 | ||||
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_ptp.c | 45 | ||||
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_ptp.h | 19 | ||||
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_spi.c | 2 | ||||
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_static_config.c | 2 | ||||
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_static_config.h | 2 | ||||
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_vl.c | 17 | ||||
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_vl.h | 2 |
14 files changed, 251 insertions, 169 deletions
diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h index 5e5d24e7c02b..21dba16af097 100644 --- a/drivers/net/dsa/sja1105/sja1105.h +++ b/drivers/net/dsa/sja1105/sja1105.h @@ -20,6 +20,27 @@ #define SJA1105_AGEING_TIME_MS(ms) ((ms) / 10) #define SJA1105_NUM_L2_POLICERS SJA1110_MAX_L2_POLICING_COUNT +/* Calculated assuming 1Gbps, where the clock has 125 MHz (8 ns period) + * To avoid floating point operations, we'll multiply the degrees by 10 + * to get a "phase" and get 1 decimal point precision. + */ +#define SJA1105_RGMII_DELAY_PS_TO_PHASE(ps) \ + (((ps) * 360) / 800) +#define SJA1105_RGMII_DELAY_PHASE_TO_PS(phase) \ + ((800 * (phase)) / 360) +#define SJA1105_RGMII_DELAY_PHASE_TO_HW(phase) \ + (((phase) - 738) / 9) +#define SJA1105_RGMII_DELAY_PS_TO_HW(ps) \ + SJA1105_RGMII_DELAY_PHASE_TO_HW(SJA1105_RGMII_DELAY_PS_TO_PHASE(ps)) + +/* Valid range in degrees is a value between 73.8 and 101.7 + * in 0.9 degree increments + */ +#define SJA1105_RGMII_DELAY_MIN_PS \ + SJA1105_RGMII_DELAY_PHASE_TO_PS(738) +#define SJA1105_RGMII_DELAY_MAX_PS \ + SJA1105_RGMII_DELAY_PHASE_TO_PS(1017) + typedef enum { SPI_READ = 0, SPI_WRITE = 1, @@ -222,16 +243,14 @@ struct sja1105_flow_block { struct sja1105_private { struct sja1105_static_config static_config; - bool rgmii_rx_delay[SJA1105_MAX_NUM_PORTS]; - bool rgmii_tx_delay[SJA1105_MAX_NUM_PORTS]; + int rgmii_rx_delay_ps[SJA1105_MAX_NUM_PORTS]; + int rgmii_tx_delay_ps[SJA1105_MAX_NUM_PORTS]; phy_interface_t phy_mode[SJA1105_MAX_NUM_PORTS]; bool fixed_link[SJA1105_MAX_NUM_PORTS]; - bool vlan_aware; unsigned long ucast_egress_floods; unsigned long bcast_egress_floods; const struct sja1105_info *info; size_t max_xfer_len; - struct gpio_desc *reset_gpio; struct spi_device *spidev; struct dsa_switch *ds; u16 bridge_pvid[SJA1105_MAX_NUM_PORTS]; @@ -242,6 +261,8 @@ struct sja1105_private { * the switch doesn't confuse them with one another. */ struct mutex mgmt_lock; + /* Serializes access to the dynamic config interface */ + struct mutex dynamic_config_lock; struct devlink_region **regions; struct sja1105_cbs_entry *cbs; struct mii_bus *mdio_base_t1; diff --git a/drivers/net/dsa/sja1105/sja1105_clocking.c b/drivers/net/dsa/sja1105/sja1105_clocking.c index 387a1f2f161c..e3699f76f6d7 100644 --- a/drivers/net/dsa/sja1105/sja1105_clocking.c +++ b/drivers/net/dsa/sja1105/sja1105_clocking.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: BSD-3-Clause -/* Copyright (c) 2016-2018, NXP Semiconductors +/* Copyright 2016-2018 NXP * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> */ #include <linux/packing.h> @@ -498,17 +498,6 @@ sja1110_cfg_pad_mii_id_packing(void *buf, struct sja1105_cfg_pad_mii_id *cmd, sja1105_packing(buf, &cmd->txc_pd, 0, 0, size, op); } -/* Valid range in degrees is an integer between 73.8 and 101.7 */ -static u64 sja1105_rgmii_delay(u64 phase) -{ - /* UM11040.pdf: The delay in degree phase is 73.8 + delay_tune * 0.9. - * To avoid floating point operations we'll multiply by 10 - * and get 1 decimal point precision. - */ - phase *= 10; - return (phase - 738) / 9; -} - /* The RGMII delay setup procedure is 2-step and gets called upon each * .phylink_mac_config. Both are strategic. * The reason is that the RX Tunable Delay Line of the SJA1105 MAC has issues @@ -521,13 +510,15 @@ int sja1105pqrs_setup_rgmii_delay(const void *ctx, int port) const struct sja1105_private *priv = ctx; const struct sja1105_regs *regs = priv->info->regs; struct sja1105_cfg_pad_mii_id pad_mii_id = {0}; + int rx_delay = priv->rgmii_rx_delay_ps[port]; + int tx_delay = priv->rgmii_tx_delay_ps[port]; u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; int rc; - if (priv->rgmii_rx_delay[port]) - pad_mii_id.rxc_delay = sja1105_rgmii_delay(90); - if (priv->rgmii_tx_delay[port]) - pad_mii_id.txc_delay = sja1105_rgmii_delay(90); + if (rx_delay) + pad_mii_id.rxc_delay = SJA1105_RGMII_DELAY_PS_TO_HW(rx_delay); + if (tx_delay) + pad_mii_id.txc_delay = SJA1105_RGMII_DELAY_PS_TO_HW(tx_delay); /* Stage 1: Turn the RGMII delay lines off. */ pad_mii_id.rxc_bypass = 1; @@ -542,11 +533,11 @@ int sja1105pqrs_setup_rgmii_delay(const void *ctx, int port) return rc; /* Stage 2: Turn the RGMII delay lines on. */ - if (priv->rgmii_rx_delay[port]) { + if (rx_delay) { pad_mii_id.rxc_bypass = 0; pad_mii_id.rxc_pd = 0; } - if (priv->rgmii_tx_delay[port]) { + if (tx_delay) { pad_mii_id.txc_bypass = 0; pad_mii_id.txc_pd = 0; } @@ -561,20 +552,22 @@ int sja1110_setup_rgmii_delay(const void *ctx, int port) const struct sja1105_private *priv = ctx; const struct sja1105_regs *regs = priv->info->regs; struct sja1105_cfg_pad_mii_id pad_mii_id = {0}; + int rx_delay = priv->rgmii_rx_delay_ps[port]; + int tx_delay = priv->rgmii_tx_delay_ps[port]; u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; pad_mii_id.rxc_pd = 1; pad_mii_id.txc_pd = 1; - if (priv->rgmii_rx_delay[port]) { - pad_mii_id.rxc_delay = sja1105_rgmii_delay(90); + if (rx_delay) { + pad_mii_id.rxc_delay = SJA1105_RGMII_DELAY_PS_TO_HW(rx_delay); /* The "BYPASS" bit in SJA1110 is actually a "don't bypass" */ pad_mii_id.rxc_bypass = 1; pad_mii_id.rxc_pd = 0; } - if (priv->rgmii_tx_delay[port]) { - pad_mii_id.txc_delay = sja1105_rgmii_delay(90); + if (tx_delay) { + pad_mii_id.txc_delay = SJA1105_RGMII_DELAY_PS_TO_HW(tx_delay); pad_mii_id.txc_bypass = 1; pad_mii_id.txc_pd = 0; } diff --git a/drivers/net/dsa/sja1105/sja1105_devlink.c b/drivers/net/dsa/sja1105/sja1105_devlink.c index 05c7f4ca3b1a..0569ff066634 100644 --- a/drivers/net/dsa/sja1105/sja1105_devlink.c +++ b/drivers/net/dsa/sja1105/sja1105_devlink.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> - * Copyright 2020 NXP Semiconductors + * Copyright 2020 NXP */ #include "sja1105.h" diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c index f2049f52833c..7729d3f8b7f5 100644 --- a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c +++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c @@ -1170,6 +1170,56 @@ const struct sja1105_dynamic_table_ops sja1110_dyn_ops[BLK_IDX_MAX_DYN] = { }, }; +#define SJA1105_DYNAMIC_CONFIG_SLEEP_US 10 +#define SJA1105_DYNAMIC_CONFIG_TIMEOUT_US 100000 + +static int +sja1105_dynamic_config_poll_valid(struct sja1105_private *priv, + struct sja1105_dyn_cmd *cmd, + const struct sja1105_dynamic_table_ops *ops) +{ + u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {}; + int rc; + + /* We don't _need_ to read the full entry, just the command area which + * is a fixed SJA1105_SIZE_DYN_CMD. But our cmd_packing() API expects a + * buffer that contains the full entry too. Additionally, our API + * doesn't really know how many bytes into the buffer does the command + * area really begin. So just read back the whole entry. + */ + rc = sja1105_xfer_buf(priv, SPI_READ, ops->addr, packed_buf, + ops->packed_size); + if (rc) + return rc; + + /* Unpack the command structure, and return it to the caller in case it + * needs to perform further checks on it (VALIDENT). + */ + memset(cmd, 0, sizeof(*cmd)); + ops->cmd_packing(packed_buf, cmd, UNPACK); + + /* Hardware hasn't cleared VALID => still working on it */ + return cmd->valid ? -EAGAIN : 0; +} + +/* Poll the dynamic config entry's control area until the hardware has + * cleared the VALID bit, which means we have confirmation that it has + * finished processing the command. + */ +static int +sja1105_dynamic_config_wait_complete(struct sja1105_private *priv, + struct sja1105_dyn_cmd *cmd, + const struct sja1105_dynamic_table_ops *ops) +{ + int rc; + + return read_poll_timeout(sja1105_dynamic_config_poll_valid, + rc, rc != -EAGAIN, + SJA1105_DYNAMIC_CONFIG_SLEEP_US, + SJA1105_DYNAMIC_CONFIG_TIMEOUT_US, + false, priv, cmd, ops); +} + /* Provides read access to the settings through the dynamic interface * of the switch. * @blk_idx is used as key to select from the sja1105_dynamic_table_ops. @@ -1196,7 +1246,6 @@ int sja1105_dynamic_config_read(struct sja1105_private *priv, struct sja1105_dyn_cmd cmd = {0}; /* SPI payload buffer */ u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {0}; - int retries = 3; int rc; if (blk_idx >= BLK_IDX_MAX_DYN) @@ -1234,33 +1283,21 @@ int sja1105_dynamic_config_read(struct sja1105_private *priv, ops->entry_packing(packed_buf, entry, PACK); /* Send SPI write operation: read config table entry */ + mutex_lock(&priv->dynamic_config_lock); rc = sja1105_xfer_buf(priv, SPI_WRITE, ops->addr, packed_buf, ops->packed_size); - if (rc < 0) + if (rc < 0) { + mutex_unlock(&priv->dynamic_config_lock); return rc; + } - /* Loop until we have confirmation that hardware has finished - * processing the command and has cleared the VALID field - */ - do { - memset(packed_buf, 0, ops->packed_size); - - /* Retrieve the read operation's result */ - rc = sja1105_xfer_buf(priv, SPI_READ, ops->addr, packed_buf, - ops->packed_size); - if (rc < 0) - return rc; - - cmd = (struct sja1105_dyn_cmd) {0}; - ops->cmd_packing(packed_buf, &cmd, UNPACK); - - if (!cmd.valident && !(ops->access & OP_VALID_ANYWAY)) - return -ENOENT; - cpu_relax(); - } while (cmd.valid && --retries); + rc = sja1105_dynamic_config_wait_complete(priv, &cmd, ops); + mutex_unlock(&priv->dynamic_config_lock); + if (rc < 0) + return rc; - if (cmd.valid) - return -ETIMEDOUT; + if (!cmd.valident && !(ops->access & OP_VALID_ANYWAY)) + return -ENOENT; /* Don't dereference possibly NULL pointer - maybe caller * only wanted to see whether the entry existed or not. @@ -1316,8 +1353,16 @@ int sja1105_dynamic_config_write(struct sja1105_private *priv, ops->entry_packing(packed_buf, entry, PACK); /* Send SPI write operation: read config table entry */ + mutex_lock(&priv->dynamic_config_lock); rc = sja1105_xfer_buf(priv, SPI_WRITE, ops->addr, packed_buf, ops->packed_size); + if (rc < 0) { + mutex_unlock(&priv->dynamic_config_lock); + return rc; + } + + rc = sja1105_dynamic_config_wait_complete(priv, &cmd, ops); + mutex_unlock(&priv->dynamic_config_lock); if (rc < 0) return rc; diff --git a/drivers/net/dsa/sja1105/sja1105_flower.c b/drivers/net/dsa/sja1105/sja1105_flower.c index 6c10ffa968ce..72b9b39b0989 100644 --- a/drivers/net/dsa/sja1105/sja1105_flower.c +++ b/drivers/net/dsa/sja1105/sja1105_flower.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2020, NXP Semiconductors +/* Copyright 2020 NXP */ #include "sja1105.h" #include "sja1105_vl.h" diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 2f8cc6686c38..c343effe2e96 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -27,15 +27,29 @@ #define SJA1105_UNKNOWN_MULTICAST 0x010000000000ull -static void sja1105_hw_reset(struct gpio_desc *gpio, unsigned int pulse_len, - unsigned int startup_delay) +/* Configure the optional reset pin and bring up switch */ +static int sja1105_hw_reset(struct device *dev, unsigned int pulse_len, + unsigned int startup_delay) { + struct gpio_desc *gpio; + + gpio = gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(gpio)) + return PTR_ERR(gpio); + + if (!gpio) + return 0; + gpiod_set_value_cansleep(gpio, 1); /* Wait for minimum reset pulse length */ msleep(pulse_len); gpiod_set_value_cansleep(gpio, 0); /* Wait until chip is ready after reset */ msleep(startup_delay); + + gpiod_put(gpio); + + return 0; } static void @@ -1095,27 +1109,78 @@ static int sja1105_static_config_load(struct sja1105_private *priv) return sja1105_static_config_upload(priv); } -static int sja1105_parse_rgmii_delays(struct sja1105_private *priv) +/* This is the "new way" for a MAC driver to configure its RGMII delay lines, + * based on the explicit "rx-internal-delay-ps" and "tx-internal-delay-ps" + * properties. It has the advantage of working with fixed links and with PHYs + * that apply RGMII delays too, and the MAC driver needs not perform any + * special checks. + * + * Previously we were acting upon the "phy-mode" property when we were + * operating in fixed-link, basically acting as a PHY, but with a reversed + * interpretation: PHY_INTERFACE_MODE_RGMII_TXID means that the MAC should + * behave as if it is connected to a PHY which has applied RGMII delays in the + * TX direction. So if anything, RX delays should have been added by the MAC, + * but we were adding TX delays. + * + * If the "{rx,tx}-internal-delay-ps" properties are not specified, we fall + * back to the legacy behavior and apply delays on fixed-link ports based on + * the reverse interpretation of the phy-mode. This is a deviation from the + * expected default behavior which is to simply apply no delays. To achieve + * that behavior with the new bindings, it is mandatory to specify + * "{rx,tx}-internal-delay-ps" with a value of 0. + */ +static int sja1105_parse_rgmii_delays(struct sja1105_private *priv, int port, + struct device_node *port_dn) { - struct dsa_switch *ds = priv->ds; - int port; + phy_interface_t phy_mode = priv->phy_mode[port]; + struct device *dev = &priv->spidev->dev; + int rx_delay = -1, tx_delay = -1; - for (port = 0; port < ds->num_ports; port++) { - if (!priv->fixed_link[port]) - continue; + if (!phy_interface_mode_is_rgmii(phy_mode)) + return 0; - if (priv->phy_mode[port] == PHY_INTERFACE_MODE_RGMII_RXID || - priv->phy_mode[port] == PHY_INTERFACE_MODE_RGMII_ID) - priv->rgmii_rx_delay[port] = true; + of_property_read_u32(port_dn, "rx-internal-delay-ps", &rx_delay); + of_property_read_u32(port_dn, "tx-internal-delay-ps", &tx_delay); - if (priv->phy_mode[port] == PHY_INTERFACE_MODE_RGMII_TXID || - priv->phy_mode[port] == PHY_INTERFACE_MODE_RGMII_ID) - priv->rgmii_tx_delay[port] = true; + if (rx_delay == -1 && tx_delay == -1 && priv->fixed_link[port]) { + dev_warn(dev, + "Port %d interpreting RGMII delay settings based on \"phy-mode\" property, " + "please update device tree to specify \"rx-internal-delay-ps\" and " + "\"tx-internal-delay-ps\"", + port); - if ((priv->rgmii_rx_delay[port] || priv->rgmii_tx_delay[port]) && - !priv->info->setup_rgmii_delay) - return -EINVAL; + if (phy_mode == PHY_INTERFACE_MODE_RGMII_RXID || + phy_mode == PHY_INTERFACE_MODE_RGMII_ID) + rx_delay = 2000; + + if (phy_mode == PHY_INTERFACE_MODE_RGMII_TXID || + phy_mode == PHY_INTERFACE_MODE_RGMII_ID) + tx_delay = 2000; + } + + if (rx_delay < 0) + rx_delay = 0; + if (tx_delay < 0) + tx_delay = 0; + + if ((rx_delay || tx_delay) && !priv->info->setup_rgmii_delay) { + dev_err(dev, "Chip cannot apply RGMII delays\n"); + return -EINVAL; } + + if ((rx_delay && rx_delay < SJA1105_RGMII_DELAY_MIN_PS) || + (tx_delay && tx_delay < SJA1105_RGMII_DELAY_MIN_PS) || + (rx_delay > SJA1105_RGMII_DELAY_MAX_PS) || + (tx_delay > SJA1105_RGMII_DELAY_MAX_PS)) { + dev_err(dev, + "port %d RGMII delay values out of range, must be between %d and %d ps\n", + port, SJA1105_RGMII_DELAY_MIN_PS, SJA1105_RGMII_DELAY_MAX_PS); + return -ERANGE; + } + + priv->rgmii_rx_delay_ps[port] = rx_delay; + priv->rgmii_tx_delay_ps[port] = tx_delay; + return 0; } @@ -1166,6 +1231,12 @@ static int sja1105_parse_ports_node(struct sja1105_private *priv, } priv->phy_mode[index] = phy_mode; + + err = sja1105_parse_rgmii_delays(priv, index, child); + if (err) { + of_node_put(child); + return err; + } } return 0; @@ -1360,7 +1431,7 @@ static void sja1105_phylink_validate(struct dsa_switch *ds, int port, */ if (state->interface != PHY_INTERFACE_MODE_NA && sja1105_phy_mode_mismatch(priv, port, state->interface)) { - bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + linkmode_zero(supported); return; } @@ -1380,9 +1451,8 @@ static void sja1105_phylink_validate(struct dsa_switch *ds, int port, phylink_set(mask, 2500baseX_Full); } - bitmap_and(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS); - bitmap_and(state->advertising, state->advertising, mask, - __ETHTOOL_LINK_MODE_MASK_NBITS); + linkmode_and(supported, supported, mask); + linkmode_and(state->advertising, state->advertising, mask); } static int @@ -1766,6 +1836,7 @@ static int sja1105_fdb_del(struct dsa_switch *ds, int port, static int sja1105_fdb_dump(struct dsa_switch *ds, int port, dsa_fdb_dump_cb_t *cb, void *data) { + struct dsa_port *dp = dsa_to_port(ds, port); struct sja1105_private *priv = ds->priv; struct device *dev = ds->dev; int i; @@ -1802,7 +1873,7 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port, u64_to_ether_addr(l2_lookup.macaddr, macaddr); /* We need to hide the dsa_8021q VLANs from the user. */ - if (!priv->vlan_aware) + if (!dsa_port_is_vlan_filtering(dp)) l2_lookup.vlanid = 0; rc = cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data); if (rc) @@ -2295,11 +2366,6 @@ int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled, tpid2 = ETH_P_SJA1105; } - if (priv->vlan_aware == enabled) - return 0; - - priv->vlan_aware = enabled; - table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS]; general_params = table->entries; /* EtherType used to identify inner tagged (C-tag) VLAN traffic */ @@ -2332,7 +2398,7 @@ int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled, */ table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS]; l2_lookup_params = table->entries; - l2_lookup_params->shared_learn = !priv->vlan_aware; + l2_lookup_params->shared_learn = !enabled; for (port = 0; port < ds->num_ports; port++) { if (dsa_is_unused_port(ds, port)) @@ -2965,7 +3031,6 @@ static int sja1105_setup_ports(struct sja1105_private *priv) continue; dp->priv = sp; - sp->dp = dp; sp->data = tagger_data; slave = dp->slave; kthread_init_work(&sp->xmit_work, sja1105_port_deferred_xmit); @@ -3117,7 +3182,7 @@ static void sja1105_teardown(struct dsa_switch *ds) sja1105_static_config_free(&priv->static_config); } -const struct dsa_switch_ops sja1105_switch_ops = { +static const struct dsa_switch_ops sja1105_switch_ops = { .get_tag_protocol = sja1105_get_tag_protocol, .setup = sja1105_setup, .teardown = sja1105_teardown, @@ -3166,7 +3231,6 @@ const struct dsa_switch_ops sja1105_switch_ops = { .port_bridge_tx_fwd_offload = dsa_tag_8021q_bridge_tx_fwd_offload, .port_bridge_tx_fwd_unoffload = dsa_tag_8021q_bridge_tx_fwd_unoffload, }; -EXPORT_SYMBOL_GPL(sja1105_switch_ops); static const struct of_device_id sja1105_dt_ids[]; @@ -3230,17 +3294,14 @@ static int sja1105_probe(struct spi_device *spi) return -EINVAL; } + rc = sja1105_hw_reset(dev, 1, 1); + if (rc) + return rc; + priv = devm_kzalloc(dev, sizeof(struct sja1105_private), GFP_KERNEL); if (!priv) return -ENOMEM; - /* Configure the optional reset pin and bring up switch */ - priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); - if (IS_ERR(priv->reset_gpio)) - dev_dbg(dev, "reset-gpios not defined, ignoring\n"); - else - sja1105_hw_reset(priv->reset_gpio, 1, 1); - /* Populate our driver private structure (priv) based on * the device tree node that was probed (spi) */ @@ -3304,6 +3365,7 @@ static int sja1105_probe(struct spi_device *spi) priv->ds = ds; mutex_init(&priv->ptp_data.lock); + mutex_init(&priv->dynamic_config_lock); mutex_init(&priv->mgmt_lock); rc = sja1105_parse_dt(priv); @@ -3312,15 +3374,6 @@ static int sja1105_probe(struct spi_device *spi) return rc; } - /* Error out early if internal delays are required through DT - * and we can't apply them. - */ - rc = sja1105_parse_rgmii_delays(priv); - if (rc < 0) { - dev_err(ds->dev, "RGMII delay not supported\n"); - return rc; - } - if (IS_ENABLED(CONFIG_NET_SCH_CBS)) { priv->cbs = devm_kcalloc(dev, priv->info->num_cbs_shapers, sizeof(struct sja1105_cbs_entry), @@ -3335,13 +3388,29 @@ static int sja1105_probe(struct spi_device *spi) static int sja1105_remove(struct spi_device *spi) { struct sja1105_private *priv = spi_get_drvdata(spi); - struct dsa_switch *ds = priv->ds; - dsa_unregister_switch(ds); + if (!priv) + return 0; + + dsa_unregister_switch(priv->ds); + + spi_set_drvdata(spi, NULL); return 0; } +static void sja1105_shutdown(struct spi_device *spi) +{ + struct sja1105_private *priv = spi_get_drvdata(spi); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + spi_set_drvdata(spi, NULL); +} + static const struct of_device_id sja1105_dt_ids[] = { { .compatible = "nxp,sja1105e", .data = &sja1105e_info }, { .compatible = "nxp,sja1105t", .data = &sja1105t_info }, @@ -3365,6 +3434,7 @@ static struct spi_driver sja1105_driver = { }, .probe = sja1105_probe, .remove = sja1105_remove, + .shutdown = sja1105_shutdown, }; module_spi_driver(sja1105_driver); diff --git a/drivers/net/dsa/sja1105/sja1105_mdio.c b/drivers/net/dsa/sja1105/sja1105_mdio.c index 705d3900e43a..215dd17ca790 100644 --- a/drivers/net/dsa/sja1105/sja1105_mdio.c +++ b/drivers/net/dsa/sja1105/sja1105_mdio.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2021, NXP Semiconductors +/* Copyright 2021 NXP */ #include <linux/pcs/pcs-xpcs.h> #include <linux/of_mdio.h> diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.c b/drivers/net/dsa/sja1105/sja1105_ptp.c index 691f6dd7e669..54396992a919 100644 --- a/drivers/net/dsa/sja1105/sja1105_ptp.c +++ b/drivers/net/dsa/sja1105/sja1105_ptp.c @@ -64,6 +64,7 @@ enum sja1105_ptp_clk_mode { static int sja1105_change_rxtstamping(struct sja1105_private *priv, bool on) { + struct sja1105_tagger_data *tagger_data = &priv->tagger_data; struct sja1105_ptp_data *ptp_data = &priv->ptp_data; struct sja1105_general_params_entry *general_params; struct sja1105_table *table; @@ -79,7 +80,7 @@ static int sja1105_change_rxtstamping(struct sja1105_private *priv, priv->tagger_data.stampable_skb = NULL; } ptp_cancel_worker_sync(ptp_data->clock); - skb_queue_purge(&ptp_data->skb_txtstamp_queue); + skb_queue_purge(&tagger_data->skb_txtstamp_queue); skb_queue_purge(&ptp_data->skb_rxtstamp_queue); return sja1105_static_config_reload(priv, SJA1105_RX_HWTSTAMPING); @@ -452,40 +453,6 @@ bool sja1105_port_rxtstamp(struct dsa_switch *ds, int port, return priv->info->rxtstamp(ds, port, skb); } -void sja1110_process_meta_tstamp(struct dsa_switch *ds, int port, u8 ts_id, - enum sja1110_meta_tstamp dir, u64 tstamp) -{ - struct sja1105_private *priv = ds->priv; - struct sja1105_ptp_data *ptp_data = &priv->ptp_data; - struct sk_buff *skb, *skb_tmp, *skb_match = NULL; - struct skb_shared_hwtstamps shwt = {0}; - - /* We don't care about RX timestamps on the CPU port */ - if (dir == SJA1110_META_TSTAMP_RX) - return; - - spin_lock(&ptp_data->skb_txtstamp_queue.lock); - - skb_queue_walk_safe(&ptp_data->skb_txtstamp_queue, skb, skb_tmp) { - if (SJA1105_SKB_CB(skb)->ts_id != ts_id) - continue; - - __skb_unlink(skb, &ptp_data->skb_txtstamp_queue); - skb_match = skb; - - break; - } - - spin_unlock(&ptp_data->skb_txtstamp_queue.lock); - - if (WARN_ON(!skb_match)) - return; - - shwt.hwtstamp = ns_to_ktime(sja1105_ticks_to_ns(tstamp)); - skb_complete_tx_timestamp(skb_match, &shwt); -} -EXPORT_SYMBOL_GPL(sja1110_process_meta_tstamp); - /* In addition to cloning the skb which is done by the common * sja1105_port_txtstamp, we need to generate a timestamp ID and save the * packet to the TX timestamping queue. @@ -494,7 +461,6 @@ void sja1110_txtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb) { struct sk_buff *clone = SJA1105_SKB_CB(skb)->clone; struct sja1105_private *priv = ds->priv; - struct sja1105_ptp_data *ptp_data = &priv->ptp_data; struct sja1105_port *sp = &priv->ports[port]; u8 ts_id; @@ -510,7 +476,7 @@ void sja1110_txtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb) spin_unlock(&sp->data->meta_lock); - skb_queue_tail(&ptp_data->skb_txtstamp_queue, clone); + skb_queue_tail(&sp->data->skb_txtstamp_queue, clone); } /* Called from dsa_skb_tx_timestamp. This callback is just to clone @@ -953,7 +919,7 @@ int sja1105_ptp_clock_register(struct dsa_switch *ds) /* Only used on SJA1105 */ skb_queue_head_init(&ptp_data->skb_rxtstamp_queue); /* Only used on SJA1110 */ - skb_queue_head_init(&ptp_data->skb_txtstamp_queue); + skb_queue_head_init(&tagger_data->skb_txtstamp_queue); spin_lock_init(&tagger_data->meta_lock); ptp_data->clock = ptp_clock_register(&ptp_data->caps, ds->dev); @@ -971,6 +937,7 @@ int sja1105_ptp_clock_register(struct dsa_switch *ds) void sja1105_ptp_clock_unregister(struct dsa_switch *ds) { struct sja1105_private *priv = ds->priv; + struct sja1105_tagger_data *tagger_data = &priv->tagger_data; struct sja1105_ptp_data *ptp_data = &priv->ptp_data; if (IS_ERR_OR_NULL(ptp_data->clock)) @@ -978,7 +945,7 @@ void sja1105_ptp_clock_unregister(struct dsa_switch *ds) del_timer_sync(&ptp_data->extts_timer); ptp_cancel_worker_sync(ptp_data->clock); - skb_queue_purge(&ptp_data->skb_txtstamp_queue); + skb_queue_purge(&tagger_data->skb_txtstamp_queue); skb_queue_purge(&ptp_data->skb_rxtstamp_queue); ptp_clock_unregister(ptp_data->clock); ptp_data->clock = NULL; diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.h b/drivers/net/dsa/sja1105/sja1105_ptp.h index 3c874bb4c17b..3ae6b9fdd492 100644 --- a/drivers/net/dsa/sja1105/sja1105_ptp.h +++ b/drivers/net/dsa/sja1105/sja1105_ptp.h @@ -8,21 +8,6 @@ #if IS_ENABLED(CONFIG_NET_DSA_SJA1105_PTP) -/* Timestamps are in units of 8 ns clock ticks (equivalent to - * a fixed 125 MHz clock). - */ -#define SJA1105_TICK_NS 8 - -static inline s64 ns_to_sja1105_ticks(s64 ns) -{ - return ns / SJA1105_TICK_NS; -} - -static inline s64 sja1105_ticks_to_ns(s64 ticks) -{ - return ticks * SJA1105_TICK_NS; -} - /* Calculate the first base_time in the future that satisfies this * relationship: * @@ -77,10 +62,6 @@ struct sja1105_ptp_data { struct timer_list extts_timer; /* Used only on SJA1105 to reconstruct partial timestamps */ struct sk_buff_head skb_rxtstamp_queue; - /* Used on SJA1110 where meta frames are generated only for - * 2-step TX timestamps - */ - struct sk_buff_head skb_txtstamp_queue; struct ptp_clock_info caps; struct ptp_clock *clock; struct sja1105_ptp_cmd cmd; diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c index d60a530d0272..d3c9ad6d39d4 100644 --- a/drivers/net/dsa/sja1105/sja1105_spi.c +++ b/drivers/net/dsa/sja1105/sja1105_spi.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: BSD-3-Clause -/* Copyright (c) 2016-2018, NXP Semiconductors +/* Copyright 2016-2018 NXP * Copyright (c) 2018, Sensor-Technik Wiedemann GmbH * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> */ diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.c b/drivers/net/dsa/sja1105/sja1105_static_config.c index 7a422ef4deb6..baba204ad62f 100644 --- a/drivers/net/dsa/sja1105/sja1105_static_config.c +++ b/drivers/net/dsa/sja1105/sja1105_static_config.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: BSD-3-Clause -/* Copyright (c) 2016-2018, NXP Semiconductors +/* Copyright 2016-2018 NXP * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> */ #include "sja1105_static_config.h" diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.h b/drivers/net/dsa/sja1105/sja1105_static_config.h index bce0f5c03d0b..6a372d5f22ae 100644 --- a/drivers/net/dsa/sja1105/sja1105_static_config.h +++ b/drivers/net/dsa/sja1105/sja1105_static_config.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: BSD-3-Clause */ -/* Copyright (c) 2016-2018, NXP Semiconductors +/* Copyright 2016-2018 NXP * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> */ #ifndef _SJA1105_STATIC_CONFIG_H diff --git a/drivers/net/dsa/sja1105/sja1105_vl.c b/drivers/net/dsa/sja1105/sja1105_vl.c index ec7b65daec20..f5dca6a9b0f9 100644 --- a/drivers/net/dsa/sja1105/sja1105_vl.c +++ b/drivers/net/dsa/sja1105/sja1105_vl.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2020, NXP Semiconductors +/* Copyright 2020 NXP */ #include <net/tc_act/tc_gate.h> #include <linux/dsa/8021q.h> @@ -394,7 +394,8 @@ static int sja1105_init_virtual_links(struct sja1105_private *priv, vl_lookup[k].vlanid = rule->key.vl.vid; vl_lookup[k].vlanprior = rule->key.vl.pcp; } else { - u16 vid = dsa_8021q_rx_vid(priv->ds, port); + struct dsa_port *dp = dsa_to_port(priv->ds, port); + u16 vid = dsa_tag_8021q_rx_vid(dp); vl_lookup[k].vlanid = vid; vl_lookup[k].vlanprior = 0; @@ -494,13 +495,15 @@ int sja1105_vl_redirect(struct sja1105_private *priv, int port, bool append) { struct sja1105_rule *rule = sja1105_rule_find(priv, cookie); + struct dsa_port *dp = dsa_to_port(priv->ds, port); + bool vlan_aware = dsa_port_is_vlan_filtering(dp); int rc; - if (!priv->vlan_aware && key->type != SJA1105_KEY_VLAN_UNAWARE_VL) { + if (!vlan_aware && key->type != SJA1105_KEY_VLAN_UNAWARE_VL) { NL_SET_ERR_MSG_MOD(extack, "Can only redirect based on DMAC"); return -EOPNOTSUPP; - } else if (priv->vlan_aware && key->type != SJA1105_KEY_VLAN_AWARE_VL) { + } else if (vlan_aware && key->type != SJA1105_KEY_VLAN_AWARE_VL) { NL_SET_ERR_MSG_MOD(extack, "Can only redirect based on {DMAC, VID, PCP}"); return -EOPNOTSUPP; @@ -568,6 +571,8 @@ int sja1105_vl_gate(struct sja1105_private *priv, int port, u32 num_entries, struct action_gate_entry *entries) { struct sja1105_rule *rule = sja1105_rule_find(priv, cookie); + struct dsa_port *dp = dsa_to_port(priv->ds, port); + bool vlan_aware = dsa_port_is_vlan_filtering(dp); int ipv = -1; int i, rc; s32 rem; @@ -592,11 +597,11 @@ int sja1105_vl_gate(struct sja1105_private *priv, int port, return -ERANGE; } - if (!priv->vlan_aware && key->type != SJA1105_KEY_VLAN_UNAWARE_VL) { + if (!vlan_aware && key->type != SJA1105_KEY_VLAN_UNAWARE_VL) { NL_SET_ERR_MSG_MOD(extack, "Can only gate based on DMAC"); return -EOPNOTSUPP; - } else if (priv->vlan_aware && key->type != SJA1105_KEY_VLAN_AWARE_VL) { + } else if (vlan_aware && key->type != SJA1105_KEY_VLAN_AWARE_VL) { NL_SET_ERR_MSG_MOD(extack, "Can only gate based on {DMAC, VID, PCP}"); return -EOPNOTSUPP; diff --git a/drivers/net/dsa/sja1105/sja1105_vl.h b/drivers/net/dsa/sja1105/sja1105_vl.h index 173d78963fed..51fba0dce91a 100644 --- a/drivers/net/dsa/sja1105/sja1105_vl.h +++ b/drivers/net/dsa/sja1105/sja1105_vl.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright 2020, NXP Semiconductors +/* Copyright 2020 NXP */ #ifndef _SJA1105_VL_H #define _SJA1105_VL_H |