diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz_common.h')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_common.h | 60 |
1 files changed, 60 insertions, 0 deletions
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index bec846e20682..b3bb75ca0796 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -65,6 +65,12 @@ struct ksz_chip_data { u8 num_tx_queues; u8 num_ipms; /* number of Internal Priority Maps */ bool tc_cbs_supported; + + /** + * @phy_side_mdio_supported: Indicates if the chip supports an additional + * side MDIO channel for accessing integrated PHYs. + */ + bool phy_side_mdio_supported; const struct ksz_dev_ops *ops; const struct phylink_mac_ops *phylink_mac_ops; bool phy_errata_9477; @@ -191,6 +197,22 @@ struct ksz_device { struct ksz_switch_macaddr *switch_macaddr; struct net_device *hsr_dev; /* HSR */ u8 hsr_ports; + + /** + * @phy_addr_map: Array mapping switch ports to their corresponding PHY + * addresses. + */ + u8 phy_addr_map[KSZ_MAX_NUM_PORTS]; + + /** + * @parent_mdio_bus: Pointer to the external MDIO bus controller. + * + * This points to an external MDIO bus controller that is used to access + * the PHYs integrated within the switch. Unlike an integrated MDIO + * bus, this external controller provides a direct path for managing + * the switch’s internal PHYs, bypassing the main SPI interface. + */ + struct mii_bus *parent_mdio_bus; }; /* List of supported models */ @@ -214,6 +236,7 @@ enum ksz_model { LAN9372, LAN9373, LAN9374, + LAN9646, }; enum ksz_regs { @@ -326,6 +349,43 @@ struct ksz_dev_ops { void (*port_cleanup)(struct ksz_device *dev, int port); void (*port_setup)(struct ksz_device *dev, int port, bool cpu_port); int (*set_ageing_time)(struct ksz_device *dev, unsigned int msecs); + + /** + * @mdio_bus_preinit: Function pointer to pre-initialize the MDIO bus + * for accessing PHYs. + * @dev: Pointer to device structure. + * @side_mdio: Boolean indicating if the PHYs are accessed over a side + * MDIO bus. + * + * This function pointer is used to configure the MDIO bus for PHY + * access before initiating regular PHY operations. It enables either + * SPI/I2C or side MDIO access modes by unlocking necessary registers + * and setting up access permissions for the selected mode. + * + * Return: + * - 0 on success. + * - Negative error code on failure. + */ + int (*mdio_bus_preinit)(struct ksz_device *dev, bool side_mdio); + + /** + * @create_phy_addr_map: Function pointer to create a port-to-PHY + * address map. + * @dev: Pointer to device structure. + * @side_mdio: Boolean indicating if the PHYs are accessed over a side + * MDIO bus. + * + * This function pointer is responsible for mapping switch ports to PHY + * addresses according to the configured access mode (SPI or side MDIO) + * and the device’s strap configuration. The mapping setup may vary + * depending on the chip variant and configuration. Ensures the correct + * address mapping for PHY communication. + * + * Return: + * - 0 on success. + * - Negative error code on failure (e.g., invalid configuration). + */ + int (*create_phy_addr_map)(struct ksz_device *dev, bool side_mdio); int (*r_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 *val); int (*w_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 val); void (*r_mib_cnt)(struct ksz_device *dev, int port, u16 addr, |