aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/dsa/microchip/ksz_common.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/microchip/ksz_common.c')
-rw-r--r--drivers/net/dsa/microchip/ksz_common.c378
1 files changed, 322 insertions, 56 deletions
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 4e8710c7cb7b..8a03baa6aecc 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -411,6 +411,8 @@ static const struct ksz_dev_ops lan937x_dev_ops = {
.flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
.port_setup = lan937x_port_setup,
.set_ageing_time = lan937x_set_ageing_time,
+ .mdio_bus_preinit = lan937x_mdio_bus_preinit,
+ .create_phy_addr_map = lan937x_create_phy_addr_map,
.r_phy = lan937x_r_phy,
.w_phy = lan937x_w_phy,
.r_mib_cnt = ksz9477_r_mib_cnt,
@@ -1098,10 +1100,9 @@ static const struct regmap_range ksz9896_valid_regs[] = {
regmap_reg_range(0x1030, 0x1030),
regmap_reg_range(0x1100, 0x1115),
regmap_reg_range(0x111a, 0x111f),
- regmap_reg_range(0x1122, 0x1127),
- regmap_reg_range(0x112a, 0x112b),
- regmap_reg_range(0x1136, 0x1139),
- regmap_reg_range(0x113e, 0x113f),
+ regmap_reg_range(0x1120, 0x112b),
+ regmap_reg_range(0x1134, 0x113b),
+ regmap_reg_range(0x113c, 0x113f),
regmap_reg_range(0x1400, 0x1401),
regmap_reg_range(0x1403, 0x1403),
regmap_reg_range(0x1410, 0x1417),
@@ -1128,10 +1129,9 @@ static const struct regmap_range ksz9896_valid_regs[] = {
regmap_reg_range(0x2030, 0x2030),
regmap_reg_range(0x2100, 0x2115),
regmap_reg_range(0x211a, 0x211f),
- regmap_reg_range(0x2122, 0x2127),
- regmap_reg_range(0x212a, 0x212b),
- regmap_reg_range(0x2136, 0x2139),
- regmap_reg_range(0x213e, 0x213f),
+ regmap_reg_range(0x2120, 0x212b),
+ regmap_reg_range(0x2134, 0x213b),
+ regmap_reg_range(0x213c, 0x213f),
regmap_reg_range(0x2400, 0x2401),
regmap_reg_range(0x2403, 0x2403),
regmap_reg_range(0x2410, 0x2417),
@@ -1158,10 +1158,9 @@ static const struct regmap_range ksz9896_valid_regs[] = {
regmap_reg_range(0x3030, 0x3030),
regmap_reg_range(0x3100, 0x3115),
regmap_reg_range(0x311a, 0x311f),
- regmap_reg_range(0x3122, 0x3127),
- regmap_reg_range(0x312a, 0x312b),
- regmap_reg_range(0x3136, 0x3139),
- regmap_reg_range(0x313e, 0x313f),
+ regmap_reg_range(0x3120, 0x312b),
+ regmap_reg_range(0x3134, 0x313b),
+ regmap_reg_range(0x313c, 0x313f),
regmap_reg_range(0x3400, 0x3401),
regmap_reg_range(0x3403, 0x3403),
regmap_reg_range(0x3410, 0x3417),
@@ -1188,10 +1187,9 @@ static const struct regmap_range ksz9896_valid_regs[] = {
regmap_reg_range(0x4030, 0x4030),
regmap_reg_range(0x4100, 0x4115),
regmap_reg_range(0x411a, 0x411f),
- regmap_reg_range(0x4122, 0x4127),
- regmap_reg_range(0x412a, 0x412b),
- regmap_reg_range(0x4136, 0x4139),
- regmap_reg_range(0x413e, 0x413f),
+ regmap_reg_range(0x4120, 0x412b),
+ regmap_reg_range(0x4134, 0x413b),
+ regmap_reg_range(0x413c, 0x413f),
regmap_reg_range(0x4400, 0x4401),
regmap_reg_range(0x4403, 0x4403),
regmap_reg_range(0x4410, 0x4417),
@@ -1218,10 +1216,9 @@ static const struct regmap_range ksz9896_valid_regs[] = {
regmap_reg_range(0x5030, 0x5030),
regmap_reg_range(0x5100, 0x5115),
regmap_reg_range(0x511a, 0x511f),
- regmap_reg_range(0x5122, 0x5127),
- regmap_reg_range(0x512a, 0x512b),
- regmap_reg_range(0x5136, 0x5139),
- regmap_reg_range(0x513e, 0x513f),
+ regmap_reg_range(0x5120, 0x512b),
+ regmap_reg_range(0x5134, 0x513b),
+ regmap_reg_range(0x513c, 0x513f),
regmap_reg_range(0x5400, 0x5401),
regmap_reg_range(0x5403, 0x5403),
regmap_reg_range(0x5410, 0x5417),
@@ -1248,10 +1245,9 @@ static const struct regmap_range ksz9896_valid_regs[] = {
regmap_reg_range(0x6030, 0x6030),
regmap_reg_range(0x6100, 0x6115),
regmap_reg_range(0x611a, 0x611f),
- regmap_reg_range(0x6122, 0x6127),
- regmap_reg_range(0x612a, 0x612b),
- regmap_reg_range(0x6136, 0x6139),
- regmap_reg_range(0x613e, 0x613f),
+ regmap_reg_range(0x6120, 0x612b),
+ regmap_reg_range(0x6134, 0x613b),
+ regmap_reg_range(0x613c, 0x613f),
regmap_reg_range(0x6300, 0x6301),
regmap_reg_range(0x6400, 0x6401),
regmap_reg_range(0x6403, 0x6403),
@@ -1762,6 +1758,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.num_tx_queues = 8,
.num_ipms = 8,
.tc_cbs_supported = true,
+ .phy_side_mdio_supported = true,
.ops = &lan937x_dev_ops,
.phylink_mac_ops = &lan937x_phylink_mac_ops,
.mib_names = ksz9477_mib_names,
@@ -1790,6 +1787,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.num_tx_queues = 8,
.num_ipms = 8,
.tc_cbs_supported = true,
+ .phy_side_mdio_supported = true,
.ops = &lan937x_dev_ops,
.phylink_mac_ops = &lan937x_phylink_mac_ops,
.mib_names = ksz9477_mib_names,
@@ -1818,6 +1816,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.num_tx_queues = 8,
.num_ipms = 8,
.tc_cbs_supported = true,
+ .phy_side_mdio_supported = true,
.ops = &lan937x_dev_ops,
.phylink_mac_ops = &lan937x_phylink_mac_ops,
.mib_names = ksz9477_mib_names,
@@ -1850,6 +1849,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.num_tx_queues = 8,
.num_ipms = 8,
.tc_cbs_supported = true,
+ .phy_side_mdio_supported = true,
.ops = &lan937x_dev_ops,
.phylink_mac_ops = &lan937x_phylink_mac_ops,
.mib_names = ksz9477_mib_names,
@@ -1882,6 +1882,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.num_tx_queues = 8,
.num_ipms = 8,
.tc_cbs_supported = true,
+ .phy_side_mdio_supported = true,
.ops = &lan937x_dev_ops,
.phylink_mac_ops = &lan937x_phylink_mac_ops,
.mib_names = ksz9477_mib_names,
@@ -1901,6 +1902,41 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.internal_phy = {true, true, true, true,
false, false, true, true},
},
+
+ [LAN9646] = {
+ .chip_id = LAN9646_CHIP_ID,
+ .dev_name = "LAN9646",
+ .num_vlans = 4096,
+ .num_alus = 4096,
+ .num_statics = 16,
+ .cpu_ports = 0x7F, /* can be configured as cpu port */
+ .port_cnt = 7, /* total physical port count */
+ .port_nirqs = 4,
+ .num_tx_queues = 4,
+ .num_ipms = 8,
+ .ops = &ksz9477_dev_ops,
+ .phylink_mac_ops = &ksz9477_phylink_mac_ops,
+ .phy_errata_9477 = true,
+ .mib_names = ksz9477_mib_names,
+ .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+ .reg_mib_cnt = MIB_COUNTER_NUM,
+ .regs = ksz9477_regs,
+ .masks = ksz9477_masks,
+ .shifts = ksz9477_shifts,
+ .xmii_ctrl0 = ksz9477_xmii_ctrl0,
+ .xmii_ctrl1 = ksz9477_xmii_ctrl1,
+ .supports_mii = {false, false, false, false,
+ false, true, true},
+ .supports_rmii = {false, false, false, false,
+ false, true, true},
+ .supports_rgmii = {false, false, false, false,
+ false, true, true},
+ .internal_phy = {true, true, true, true,
+ true, false, false},
+ .gbit_capable = {true, true, true, true, true, true, true},
+ .wr_table = &ksz9477_register_set,
+ .rd_table = &ksz9477_register_set,
+ },
};
EXPORT_SYMBOL_GPL(ksz_switch_chips);
@@ -2112,10 +2148,8 @@ static void ksz_get_strings(struct dsa_switch *ds, int port,
if (stringset != ETH_SS_STATS)
return;
- for (i = 0; i < dev->info->mib_cnt; i++) {
- memcpy(buf + i * ETH_GSTRING_LEN,
- dev->info->mib_names[i].string, ETH_GSTRING_LEN);
- }
+ for (i = 0; i < dev->info->mib_cnt; i++)
+ ethtool_puts(&buf, dev->info->mib_names[i].string);
}
/**
@@ -2238,16 +2272,100 @@ static int ksz_sw_mdio_write(struct mii_bus *bus, int addr, int regnum,
return dev->dev_ops->w_phy(dev, addr, regnum, val);
}
+/**
+ * ksz_parent_mdio_read - Read data from a PHY register on the parent MDIO bus.
+ * @bus: MDIO bus structure.
+ * @addr: PHY address on the parent MDIO bus.
+ * @regnum: Register number to read.
+ *
+ * This function provides a direct read operation on the parent MDIO bus for
+ * accessing PHY registers. By bypassing SPI or I2C, it uses the parent MDIO bus
+ * to retrieve data from the PHY registers at the specified address and register
+ * number.
+ *
+ * Return: Value of the PHY register, or a negative error code on failure.
+ */
+static int ksz_parent_mdio_read(struct mii_bus *bus, int addr, int regnum)
+{
+ struct ksz_device *dev = bus->priv;
+
+ return mdiobus_read_nested(dev->parent_mdio_bus, addr, regnum);
+}
+
+/**
+ * ksz_parent_mdio_write - Write data to a PHY register on the parent MDIO bus.
+ * @bus: MDIO bus structure.
+ * @addr: PHY address on the parent MDIO bus.
+ * @regnum: Register number to write to.
+ * @val: Value to write to the PHY register.
+ *
+ * This function provides a direct write operation on the parent MDIO bus for
+ * accessing PHY registers. Bypassing SPI or I2C, it uses the parent MDIO bus
+ * to modify the PHY register values at the specified address.
+ *
+ * Return: 0 on success, or a negative error code on failure.
+ */
+static int ksz_parent_mdio_write(struct mii_bus *bus, int addr, int regnum,
+ u16 val)
+{
+ struct ksz_device *dev = bus->priv;
+
+ return mdiobus_write_nested(dev->parent_mdio_bus, addr, regnum, val);
+}
+
+/**
+ * ksz_phy_addr_to_port - Map a PHY address to the corresponding switch port.
+ * @dev: Pointer to device structure.
+ * @addr: PHY address to map to a port.
+ *
+ * This function finds the corresponding switch port for a given PHY address by
+ * iterating over all user ports on the device. It checks if a port's PHY
+ * address in `phy_addr_map` matches the specified address and if the port
+ * contains an internal PHY. If a match is found, the index of the port is
+ * returned.
+ *
+ * Return: Port index on success, or -EINVAL if no matching port is found.
+ */
+static int ksz_phy_addr_to_port(struct ksz_device *dev, int addr)
+{
+ struct dsa_switch *ds = dev->ds;
+ struct dsa_port *dp;
+
+ dsa_switch_for_each_user_port(dp, ds) {
+ if (dev->info->internal_phy[dp->index] &&
+ dev->phy_addr_map[dp->index] == addr)
+ return dp->index;
+ }
+
+ return -EINVAL;
+}
+
+/**
+ * ksz_irq_phy_setup - Configure IRQs for PHYs in the KSZ device.
+ * @dev: Pointer to the KSZ device structure.
+ *
+ * Sets up IRQs for each active PHY connected to the KSZ switch by mapping the
+ * appropriate IRQs for each PHY and assigning them to the `user_mii_bus` in
+ * the DSA switch structure. Each IRQ is mapped based on the port's IRQ domain.
+ *
+ * Return: 0 on success, or a negative error code on failure.
+ */
static int ksz_irq_phy_setup(struct ksz_device *dev)
{
struct dsa_switch *ds = dev->ds;
- int phy;
+ int phy, port;
int irq;
int ret;
- for (phy = 0; phy < KSZ_MAX_NUM_PORTS; phy++) {
+ for (phy = 0; phy < PHY_MAX_ADDR; phy++) {
if (BIT(phy) & ds->phys_mii_mask) {
- irq = irq_find_mapping(dev->ports[phy].pirq.domain,
+ port = ksz_phy_addr_to_port(dev, phy);
+ if (port < 0) {
+ ret = port;
+ goto out;
+ }
+
+ irq = irq_find_mapping(dev->ports[port].pirq.domain,
PORT_SRC_PHY_INT);
if (irq < 0) {
ret = irq;
@@ -2265,49 +2383,183 @@ out:
return ret;
}
+/**
+ * ksz_irq_phy_free - Release IRQ mappings for PHYs in the KSZ device.
+ * @dev: Pointer to the KSZ device structure.
+ *
+ * Releases any IRQ mappings previously assigned to active PHYs in the KSZ
+ * switch by disposing of each mapped IRQ in the `user_mii_bus` structure.
+ */
static void ksz_irq_phy_free(struct ksz_device *dev)
{
struct dsa_switch *ds = dev->ds;
int phy;
- for (phy = 0; phy < KSZ_MAX_NUM_PORTS; phy++)
+ for (phy = 0; phy < PHY_MAX_ADDR; phy++)
if (BIT(phy) & ds->phys_mii_mask)
irq_dispose_mapping(ds->user_mii_bus->irq[phy]);
}
+/**
+ * ksz_parse_dt_phy_config - Parse and validate PHY configuration from DT
+ * @dev: pointer to the KSZ device structure
+ * @bus: pointer to the MII bus structure
+ * @mdio_np: pointer to the MDIO node in the device tree
+ *
+ * This function parses and validates PHY configurations for each user port
+ * defined in the device tree for a KSZ switch device. It verifies that the
+ * `phy-handle` properties are correctly set and that the internal PHYs match
+ * expected addresses and parent nodes. Sets up the PHY mask in the MII bus if
+ * all validations pass. Logs error messages for any mismatches or missing data.
+ *
+ * Return: 0 on success, or a negative error code on failure.
+ */
+static int ksz_parse_dt_phy_config(struct ksz_device *dev, struct mii_bus *bus,
+ struct device_node *mdio_np)
+{
+ struct device_node *phy_node, *phy_parent_node;
+ bool phys_are_valid = true;
+ struct dsa_port *dp;
+ u32 phy_addr;
+ int ret;
+
+ dsa_switch_for_each_user_port(dp, dev->ds) {
+ if (!dev->info->internal_phy[dp->index])
+ continue;
+
+ phy_node = of_parse_phandle(dp->dn, "phy-handle", 0);
+ if (!phy_node) {
+ dev_err(dev->dev, "failed to parse phy-handle for port %d.\n",
+ dp->index);
+ phys_are_valid = false;
+ continue;
+ }
+
+ phy_parent_node = of_get_parent(phy_node);
+ if (!phy_parent_node) {
+ dev_err(dev->dev, "failed to get PHY-parent node for port %d\n",
+ dp->index);
+ phys_are_valid = false;
+ } else if (phy_parent_node != mdio_np) {
+ dev_err(dev->dev, "PHY-parent node mismatch for port %d, expected %pOF, got %pOF\n",
+ dp->index, mdio_np, phy_parent_node);
+ phys_are_valid = false;
+ } else {
+ ret = of_property_read_u32(phy_node, "reg", &phy_addr);
+ if (ret < 0) {
+ dev_err(dev->dev, "failed to read PHY address for port %d. Error %d\n",
+ dp->index, ret);
+ phys_are_valid = false;
+ } else if (phy_addr != dev->phy_addr_map[dp->index]) {
+ dev_err(dev->dev, "PHY address mismatch for port %d, expected 0x%x, got 0x%x\n",
+ dp->index, dev->phy_addr_map[dp->index],
+ phy_addr);
+ phys_are_valid = false;
+ } else {
+ bus->phy_mask |= BIT(phy_addr);
+ }
+ }
+
+ of_node_put(phy_node);
+ of_node_put(phy_parent_node);
+ }
+
+ if (!phys_are_valid)
+ return -EINVAL;
+
+ return 0;
+}
+
+/**
+ * ksz_mdio_register - Register and configure the MDIO bus for the KSZ device.
+ * @dev: Pointer to the KSZ device structure.
+ *
+ * This function sets up and registers an MDIO bus for the KSZ switch device,
+ * allowing access to its internal PHYs. If the device supports side MDIO,
+ * the function will configure the external MDIO controller specified by the
+ * "mdio-parent-bus" device tree property to directly manage internal PHYs.
+ * Otherwise, SPI or I2C access is set up for PHY access.
+ *
+ * Return: 0 on success, or a negative error code on failure.
+ */
static int ksz_mdio_register(struct ksz_device *dev)
{
+ struct device_node *parent_bus_node;
+ struct mii_bus *parent_bus = NULL;
struct dsa_switch *ds = dev->ds;
struct device_node *mdio_np;
struct mii_bus *bus;
- int ret;
+ int ret, i;
mdio_np = of_get_child_by_name(dev->dev->of_node, "mdio");
if (!mdio_np)
return 0;
+ parent_bus_node = of_parse_phandle(mdio_np, "mdio-parent-bus", 0);
+ if (parent_bus_node && !dev->info->phy_side_mdio_supported) {
+ dev_err(dev->dev, "Side MDIO bus is not supported for this HW, ignoring 'mdio-parent-bus' property.\n");
+ ret = -EINVAL;
+
+ goto put_mdio_node;
+ } else if (parent_bus_node) {
+ parent_bus = of_mdio_find_bus(parent_bus_node);
+ if (!parent_bus) {
+ ret = -EPROBE_DEFER;
+
+ goto put_mdio_node;
+ }
+
+ dev->parent_mdio_bus = parent_bus;
+ }
+
bus = devm_mdiobus_alloc(ds->dev);
if (!bus) {
- of_node_put(mdio_np);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto put_mdio_node;
+ }
+
+ if (dev->dev_ops->mdio_bus_preinit) {
+ ret = dev->dev_ops->mdio_bus_preinit(dev, !!parent_bus);
+ if (ret)
+ goto put_mdio_node;
+ }
+
+ if (dev->dev_ops->create_phy_addr_map) {
+ ret = dev->dev_ops->create_phy_addr_map(dev, !!parent_bus);
+ if (ret)
+ goto put_mdio_node;
+ } else {
+ for (i = 0; i < dev->info->port_cnt; i++)
+ dev->phy_addr_map[i] = i;
}
bus->priv = dev;
- bus->read = ksz_sw_mdio_read;
- bus->write = ksz_sw_mdio_write;
- bus->name = "ksz user smi";
- snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d", ds->index);
+ if (parent_bus) {
+ bus->read = ksz_parent_mdio_read;
+ bus->write = ksz_parent_mdio_write;
+ bus->name = "KSZ side MDIO";
+ snprintf(bus->id, MII_BUS_ID_SIZE, "ksz-side-mdio-%d",
+ ds->index);
+ } else {
+ bus->read = ksz_sw_mdio_read;
+ bus->write = ksz_sw_mdio_write;
+ bus->name = "ksz user smi";
+ snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d", ds->index);
+ }
+
+ ret = ksz_parse_dt_phy_config(dev, bus, mdio_np);
+ if (ret)
+ goto put_mdio_node;
+
+ ds->phys_mii_mask = bus->phy_mask;
bus->parent = ds->dev;
- bus->phy_mask = ~ds->phys_mii_mask;
ds->user_mii_bus = bus;
if (dev->irq > 0) {
ret = ksz_irq_phy_setup(dev);
- if (ret) {
- of_node_put(mdio_np);
- return ret;
- }
+ if (ret)
+ goto put_mdio_node;
}
ret = devm_of_mdiobus_register(ds->dev, bus, mdio_np);
@@ -2318,7 +2570,9 @@ static int ksz_mdio_register(struct ksz_device *dev)
ksz_irq_phy_free(dev);
}
+put_mdio_node:
of_node_put(mdio_np);
+ of_node_put(parent_bus_node);
return ret;
}
@@ -2733,26 +2987,28 @@ static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port)
return MICREL_KSZ8_P1_ERRATA;
break;
case KSZ8567_CHIP_ID:
+ /* KSZ8567R Errata DS80000752C Module 4 */
+ case KSZ8765_CHIP_ID:
+ case KSZ8794_CHIP_ID:
+ case KSZ8795_CHIP_ID:
+ /* KSZ879x/KSZ877x/KSZ876x Errata DS80000687C Module 2 */
case KSZ9477_CHIP_ID:
+ /* KSZ9477S Errata DS80000754A Module 4 */
case KSZ9567_CHIP_ID:
+ /* KSZ9567S Errata DS80000756A Module 4 */
case KSZ9896_CHIP_ID:
+ /* KSZ9896C Errata DS80000757A Module 3 */
case KSZ9897_CHIP_ID:
- /* KSZ9477 Errata DS80000754C
- *
- * Module 4: Energy Efficient Ethernet (EEE) feature select must
- * be manually disabled
+ case LAN9646_CHIP_ID:
+ /* KSZ9897R Errata DS80000758C Module 4 */
+ /* Energy Efficient Ethernet (EEE) feature select must be manually disabled
* The EEE feature is enabled by default, but it is not fully
* operational. It must be manually disabled through register
* controls. If not disabled, the PHY ports can auto-negotiate
* to enable EEE, and this feature can cause link drops when
* linked to another device supporting EEE.
*
- * The same item appears in the errata for the KSZ9567, KSZ9896,
- * and KSZ9897.
- *
- * A similar item appears in the errata for the KSZ8567, but
- * provides an alternative workaround. For now, use the simple
- * workaround of disabling the EEE feature for this device too.
+ * The same item appears in the errata for all switches above.
*/
return MICREL_NO_EEE;
}
@@ -3004,6 +3260,7 @@ static void ksz_port_teardown(struct dsa_switch *ds, int port)
case KSZ9893_CHIP_ID:
case KSZ9896_CHIP_ID:
case KSZ9897_CHIP_ID:
+ case LAN9646_CHIP_ID:
if (dsa_is_user_port(ds, port))
ksz9477_port_acl_free(dev, port);
}
@@ -3060,7 +3317,8 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds,
dev->chip_id == KSZ9477_CHIP_ID ||
dev->chip_id == KSZ9896_CHIP_ID ||
dev->chip_id == KSZ9897_CHIP_ID ||
- dev->chip_id == KSZ9567_CHIP_ID)
+ dev->chip_id == KSZ9567_CHIP_ID ||
+ dev->chip_id == LAN9646_CHIP_ID)
proto = DSA_TAG_PROTO_KSZ9477;
if (is_lan937x(dev))
@@ -3179,6 +3437,7 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port)
case LAN9372_CHIP_ID:
case LAN9373_CHIP_ID:
case LAN9374_CHIP_ID:
+ case LAN9646_CHIP_ID:
return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
}
@@ -3201,6 +3460,7 @@ static int ksz_validate_eee(struct dsa_switch *ds, int port)
case KSZ9893_CHIP_ID:
case KSZ9896_CHIP_ID:
case KSZ9897_CHIP_ID:
+ case LAN9646_CHIP_ID:
return 0;
}
@@ -3553,7 +3813,10 @@ static int ksz_switch_detect(struct ksz_device *dev)
case LAN9372_CHIP_ID:
case LAN9373_CHIP_ID:
case LAN9374_CHIP_ID:
- dev->chip_id = id32;
+
+ /* LAN9646 does not have its own chip id. */
+ if (dev->chip_id != LAN9646_CHIP_ID)
+ dev->chip_id = id32;
break;
case KSZ9893_CHIP_ID:
ret = ksz_read8(dev, REG_CHIP_ID4,
@@ -3592,6 +3855,7 @@ static int ksz_cls_flower_add(struct dsa_switch *ds, int port,
case KSZ9893_CHIP_ID:
case KSZ9896_CHIP_ID:
case KSZ9897_CHIP_ID:
+ case LAN9646_CHIP_ID:
return ksz9477_cls_flower_add(ds, port, cls, ingress);
}
@@ -3612,6 +3876,7 @@ static int ksz_cls_flower_del(struct dsa_switch *ds, int port,
case KSZ9893_CHIP_ID:
case KSZ9896_CHIP_ID:
case KSZ9897_CHIP_ID:
+ case LAN9646_CHIP_ID:
return ksz9477_cls_flower_del(ds, port, cls, ingress);
}
@@ -4699,6 +4964,7 @@ static int ksz_parse_drive_strength(struct ksz_device *dev)
case KSZ9893_CHIP_ID:
case KSZ9896_CHIP_ID:
case KSZ9897_CHIP_ID:
+ case LAN9646_CHIP_ID:
return ksz9477_drive_strength_write(dev, of_props,
ARRAY_SIZE(of_props));
default:
generated by cgit (git 2.34.1) at 2025-05-30 12:24:55 +0000